• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.111-121
• /
• 1997

The stability of a rotor-bearing system supported by swirl-controlled hybrid journal bearing with pair-type angled injection orifices is investigated for improvement of the whirl frequency ratio by allowing effective control of the tangential flow inside the bearing clearance, i.e., by achieving more freedom in controlling strength and direction of the supply tangential flow inside the bearing clearance. It is suggested that the system instability can be improved through the change of bearing dynamic characteristic parameters with the swirl control. The orifice diameter d$_0$ and recess injection angle $\alpha$ along with combinations of swirl/anti-swirl supply pressures and directions (3.0-3.0MPa, 4.0-2.0MPa, 2.0-4.0MPa) are selected for design parameters for swirl-controlled effective factors dependent on journal speeds (3000, 9000, 15000, 21000 rpm). It has been found that the orifice diameter do shows strong effects on effective maneuverability of direct-stiffness and direct damping values, while recess injection angle $\alpha$ results in substantial magnitude and direction of cross-stiffness. Specifically, recess injection parameters which are functions of angle of orifice feeding flow and recess dimensions showed very feasible effect on the stability of swirl-controlled rotor-bearing system.

• Tribology and Lubricants
• /
• 제13권3호
• /
• pp.63-72
• /
• 1997

The stability of a rotor-bearing system supported by swirl-controlled hybrid journal bearing with pair-type angled injection orifices is investigated for improvement of the whirl frequency ratio by allowing effective control of the tangential flow inside the bearing clearance, i.e., by achieving more freedom in controlling strength and direction of the supply tangential flow inside the bearing clearance. It is suggested that the system instability can be improved through the change of bearing dynamic characteristic parameters with the swirl control. The orifice diameter $d_0$ and recess injection angle $\alpha$ along with combinations of swirl/anti-swirl supply pressures and directions (3.0~3.0 MPa, 4.0~2.0 MPa, 2.0~4.0 MPa) are selected for design parameters for swirl-controlled effective factors dependent on journal speeds (3000, 9000, 15000, 21000 rpm). It has been found that the orifice diameter $d_0$ shows strong effects on effective maneuverability of direct-stiffness and direct damping values, while recess injection angle $\alpha$ results in substantial effects on the magnitude and direction of cross-stiffness. Specifically, recess injection parameters which are functions of angle of orifice feeding flow and recess dimensions showed very feasible effect on the stability control of swirl-controlled rotor-bearing system.

• 한국분무공학회지
• /
• 제10권3호
• /
• pp.29-37
• /
• 2005

The spray and acoustic characteristics of a gas/liquid swirl coaxial injector are studied experimentally. The self-pulsation is defined as a pressure and flow rate oscillations by a time-delayed feedback between liquid and gas phase. Self-pulsation has strong influences on atomization and mixing processes and accompanies painful screams. So. the spray and acoustic characteristics are investigated. Spray patterns are observed by shadow photography technique in order to determine the onset of self-pulsation. And self-pulsation boundary with Injection conditions and recess length is get. To measure the frequency of the spray oscillation. oscillation of the laser intensity which passes through spray is analyzed by Fast Fourier Transform. For acoustic tests, a PULSE System was used. Acoustic characteristics of a swirl coaxial injector are investigated according to the injection conditions. such as the pressure drop or the liquid and gas phase. and injector geometries. such as recess length and gap size between the inner and outer injector. Front the experimental results. the increase of recess length leads to the rapid increase of the sound pressure level. And as the pressure drop of the liquid phase increases. the frequency of the self?pulsation shifts to the higher frequency. The frequency of spray oscillations is the same as that of the acoustic fields by self-pulsation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.20-23
• /
• 2011

가스메탄과 액체산소를 추진제로 사용하는 스월 동축형 인젝터에서 리세스 길이 변화에 따른 분무특성 및 미립화 특성에 대한 연구를 수행하였다. 패터네이터를 이용하여 분산각 및 분무의 질량분포를 측정하였으며, 미립화 특성을 살펴보기 위해 GSV(Global Size and Velocity)를 이용하여 평균액적크기를 측정하였다. 결과적으로 액체만 분사한 경우 리세스 길이가 증가함에 따라 분산각은 감소하나 미립화 특성이 좋아지는 것을 확인하였고, 기체/액체를 동시 분사한 경우 액체만 분사한 경우에 비해 분산각은 작아지나 미립화 특성이 좋아지는 것을 확인하였다.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.82-87
• /
• 1998

In order to provide a manufacturing system with efficiency and flexibility to cope with the changes in shop floor status, the integration of process planning and operations scheduling is required. In this paper, an integrated system of process planning and operations scheduling based on the concept of process net model and genetic algorithm is suggested. The process net model includes the alternative process plans. The integrated system is applied for prismatic parts.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권4호
• /
• pp.286-292
• /
• 2011

In order to design a shear coaxial injector of solid particles for underwater propulsion system, basic experiments on gas-liquid shear coaxial injector are necessary. In the gas-liquid coaxial injector self-pulsation usually occurs with an intense scream. When self-pulsation occurs, mass flow rate oscillation and intense scream are detected by the interactions between the liquid and gas phase. Self-pulsation must be suppressed since this oscillation may cause combustion instabilities. Considerable research has been conducted on self-pulsation characteristics, but these researches are conducted in swirl coaxial injector. The main objective of this research is to understand the characteristics of self-pulsation in shear coaxial injector and reveal the mechanism of the phenomenon. Toward this object, self-pulsation frequency and spray patterns are measured by laser diagnostics and indirect photography. The self-pulsation characteristics of shear coaxial injector are studied with various injection conditions, such as the pressure drop of liquid and gas phase, and recess ratio. It was found that the frequency of the self-pulsation is proportional to the liquid and gas Reynolds number, and proportional to the L/d.

• 전자공학회논문지A
• /
• 제30A권6호
• /
• pp.38-48
• /
• 1993

A recessed n-p Juction diode with the self-aligned sturcture is proposed and fabricated by using the polysilicon as an n$^{+}$ diffusion source. The diode structure can be applicable to the emitter-base formation of high performance bipolar divice and the n$^{+}$ polysilicone mitter has an important effect on the device characteristics. The considered parameters for the polysilicon formation are the deposition condition. As$^{+}$ dose for the doping of the polysilicon and the annealing condition using RTP system. The vertical depth profiles of the fabricated diode are obtained by SIMS and the electrical characteristics are analyzed in terms of the ideality factor of diode (n), contact resistance and reverse leakage current. In addition, n$^{+}$-p junction diodes are formed by using the amorphous silicon (of combination of amorphous and polysiliocn) instead of polysilicon and their characteristics are compared with those of the standard sample. The As$^{+}$ dose for the formation of good junction is about 1~2${\times}10^{16}cm^{2}$ at given RTA conditions (1100.deg. C, 10sec).

• 한국추진공학회지
• /
• 제24권6호
• /
• pp.108-119
• /
• 2020

액체로켓엔진 연소기와 가스터빈에 사용되는 동압센서는 고온의 환경에서 작동되어야 하므로 보통 리세스 마운트로 체결된다. 리세스 마운트 방식은 고온의 연소가스로부터 센서를 보호할 수 있으나 튜브-캐비티 시스템에서 튜브 공진이 발생한다. 본 연구에서는 이를 줄이기 위해 ITP를 도입하였다. 과거 문헌에서 제안한 ITP 모델을 실험 결과와 검증하고 응답특성을 분석하였다. 이 모델을 이용하여 기하학적 형상과 물리량을 변화시켜 주파수 응답 분포를 변화시킴으로써 ITP를 설계하기 위한 가이드라인을 제안하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.985-990
• /
• 1995

Recently, the development of high speed and high precision NC-lathe for piston head machining is needed for the complexity and diversity of the piston head shape used in automobile reciprocating engine. THe piston head has many complex shapes in the aspect of fuel economy, such as ovality, profile, double ovality and recess. Among them, for the maching of the over shape of 0.1~1mm the cutting tool should move periodically symchronized with the rotation of piston workpiece. The cutting tool feeed system must have high positioning accuracy for the precise machining, high speed for the fast maching and high dynamic stiffness for the cutting force. The linear brushless DC motor is used for satisfying these coditions. The ballbush guide and supporting guide using turcite is used for the guidance of the feed drive system. Linear encoder, digital servo ampllifer and controller are used for driving the motor. THis paper presents the design and simulation of the new tool feed system for noncircular machining.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.113-121
• /
• 2013

The rate that women's EMTs(emergency medical technicians) in fire department occupy is increasing, but my general plan is aimed at suggesting the improving plan for the working environment of women's EMTs paying attention to the duty stresses of increasing women's EMTs, because improvement for the working environment of women's EMTs is being proceeded slowly. I suggested my improving plan for solving the working stress on the basis of a survey of the Recognition against women's EMTs as follows. Firstly, I suggested that physical strength of women's EMTs should be managed well continually via program establishment and a defined evaluation not only by employing a professional person in charge for physical strength in firehouse, but also by replenishing the suitable number for the urgent mobilization. Secondly, I suggested that the suitable number for the urgent mobilization should be increased to 3 including an ambulance driver. Thirdly, I suggested necessity such as the fruitful education and the creation of circumstances that can focus on education for improving participation rate, development of various new educational program, incentive program and penalty. finally, I suggested the fact that is related to the actual re-amendment of the concerned law and ordinance such as not only the smooth treatment of penalty for a traffic signal violation of ambulance and the legal remedy system due to aggravation of a patient's condition during a first-aid course, but also workshop and meeting among the periodical EMTs and administration of special therapy program and sufficient recess.