• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

• Composites Research
• /
• v.36 no.6
• /
• pp.429-434
• /
• 2023

In this study, aimed at improving the existing acoustic emission sensor for real time monitoring, a macro-fiber composite (MFC) transducer was employed as the acoustic emission sensor in the gas leak detection system. Prior to implementation, structural analysis was conducted to optimize the MFC's design. Consequently, the flexibility of the MFC facilitated excellent adherence to curved pipes, enabling the reception of acoustic emission (AE) signals without complications. Analysis of AE signals revealed substantial variations in parameter values for both high-pressure and low-pressure leaks. Notably, in the parameters of the Fast Fourier Transform (FFT) graph, the change amounted to 120% to 626% for high-pressure leaks compared to the case without leaks, and approximately 9% to 22% for low-pressure leaks. Furthermore, depending on the distance from the leak site, the magnitude of change in parameters tended to decrease as the distance increased. As the results, in the future, not only will it be possible to detect a leak by detecting the amount of parameter change in the future, but it will also be possible to identify the location of the leak from the amount of change.

• Journal of The Korean Association For Science Education
• /
• v.26 no.3
• /
• pp.330-341
• /
• 2006

This study investigated whether science museum field trips over a duration of 7 months would effect student preference and awareness of science museums. 32 eighth and ninth graders were sampled from a middle school in Seoul and asked about their preference, awareness and the effect of the science museum visits both before and after a field trip. Findings showed a preference for science museums which dealt with themes and topics of student interest. After a field trip, student responded that science museums were information providers which yielded opportunity to explore forthcoming science feats, science in everyday life, developmental histories of science and technology, science-related news, social issues, and science rationale. Even though science museums in Korea leave much to be desired in terms of quantity and quality, field trips were positively received by students. This reception and its usefulness implied that expansion publizing and active use of formal/informal education relating to science museum facilities need to be top-priority business.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.214-220
• /
• 2024

Remote control is used for operating maritime autonomous surface ships. The operator controls the ship using control data generated by the remote control system. To ensure successful remote control, three principles must be followed: safety, reliability, and availability. To achieve this, the suitability of both the control data and operators for remote control must be established. Currently, there are no international regulations in place for evaluating remote control suitability through experiments on actual ships. Conducting such experiments is dangerous, costly, and time-consuming. The goal of this study is to develop a suitability evaluation method using the output values of control devices used in actual ship operation. The proposed method involves evaluating the suitability of data by analyzing the output values and evaluating the suitability of operators by examining their tracking of these output values. The experiment was conducted using a shore-based remote control system to operate the training ship 'Hannara' of Korea National Maritime and Ocean University. The experiment involved an iterative process of obtaining the operator's tracking value for the output value of the ship's control devices and transmitting and receiving tracking data between the ship and the shore. The evaluation results showed that the transmission and reception performance of control data was suitable for remote operation. However, the operator's tracking performance revealed a need for further education and training. Therefore, the proposed evaluation method can be applied to assess the suitability and analyze both the control data and the operator's compliance with the three principles of remote control.

• Journal of the Korea Society for Simulation
• /
• v.33 no.2
• /
• pp.1-11
• /
• 2024

A cyber-physical system is a technology that connects the physical systems of a manufacturing environment with a cyber space to enable simulation. One of the major challenges in this technology is the seamless communication between these two environments. In complex manufacturing processes, it is crucial to adapt to various protocols of manufacturing equipment and ensure the transmission and reception of a large volume of data without delays or errors. In this study, we propose a method for constructing agent models for real-time simulation-capable cyberphysical systems. To achieve this, we design data collection units as independent agent models and effectively integrate them with existing simulation tools to develop the overall system architecture. To validate the proposed structure and ensure reliability, we conducted empirical testing by integrating various equipment from a real-world smart microfactory system to assess the data collection capabilities. The experiments involved testing data delay and data gaps related to data collection cycles. As a result, the proposed approach demonstrates flexibility by enabling the application of various internal data collection methods and accommodating different data formats and communication protocols for various equipment with relatively low communication delays. Consequently, it is expected that this approach will promote innovation in the manufacturing industry, enhance production line efficiency, and contribute to cost savings in maintenance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.27-34
• /
• 2024

The direct and indirect damages caused by fires in underground utility tunnels have a great impact on society as a whole, so efforts are needed to prevent and manage them in advance. To this end, research is ongoing to prevent disasters such as fire flooding by applying digital twin technology to underground utility tunnels. A network is required to transmit the sensed signals from each sensor to the platform. In essence, it is necessary to analyze the application of wireless networks in the underground utility tunnel environments because the tunnel lacks the reception range of external wireless communication systems. Within the underground utility tunnels, electromagnetic interference caused by transmission and distribution cables, and diffuse reflection of signals from internal structures, obstacles, and metallic pipes such as water pipes can cause distortion or size reduction of wireless signals. To ensure real-time connectivity for remote surveillance and monitoring tasks through sensing, it is necessary to measure and analyze the wireless coverage in underground utility tunnels. Therefore, in order to build a wireless network environment in the underground utility tunnels. this study minimized the shaded area and measured the actual cavity environment so that there is no problem in connecting to the wireless environment inside the underground utility tunnels. We analyzed the data transmission rate, signal strength, and signal-to-noise ratio for each section of the terrain of the underground utility tunnels. The obtained results provide an appropriate wireless planning approach for installing wireless networks in underground utility tunnels.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.293-315
• /
• 2013

The number of French movies imported to and released in S. Korea is constantly increasing. All French movies released in Korean theatres, however, are not a great success. For the domestic film market and audiences, the idea French cinema is generally equivalent to 'diversity cinema' or 'arthouse films' is common notion. In this respect, French movies introduced throughout the country would be culture product into which one can read other cultural significances different from that of domestic cinema, and also serve significant cultural value to understand diversity in cinema, for domestic audiences. However, it could be said that French movies, in common with Hollywood films, obey rules in the film industry and needs for audience trends. In this content, what the researchers want to do is to analysis the tendency of the domestic audience reception and main causes of commercial success in the domestic film market, analysing Taken produced in France. The analysis, most of all, suggests the consideration for the film industry beside the notion of cultural diversity in cinema, as imported films are released in the domestic theatre. For this, the study examines the promotional strategy the french cinema perceived generally as the arthouse film applies extensively, analysing on Taken, and inquires into factors of commercial success, using SWOT Analysis. This study, the first of all, (briefly) examines what audiences consider when they choose a film to watch, articulating (generally) the choice-and-consume modality of the domestic audience. And then, it examines dominant factors Taken was a commercial success in domestic film market, even though the film is a french film, using SWOT Analysis. On the basis of SWOT Analysis, finally, this study draws up promotional plan for Taken, and shed new light on dominant preconditions, when the foreign cinema would be imported from the now on.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.829-849
• /
• 2017

Due to the large-scale TV display, the convergence of broadcasting and broadband, and the advancement of signal compression and transmission technology, terrestrial digital broadcasting has evolved into UHD broadcasting capable of providing simultaneous broadcasting of fixed UHD and mobile HD. The Korean standard for terrestrial UHDTV broadcasting is based on ATSC 3.0, the broadcasting standard of North America. The terrestrial UHDTV broadcasting standard chose that as a new AV codec standard, HEVC video codec which can compress with higher efficiency compared to AVC, and MPEG-H 3D audio codec for realistic audio. Also, DASH and MMT are adopted as transmission format instead of MPEG-2 TS to support broadband as well as broadcasting network, and in order to provide 4K UHD/mobile HD service simultaneously ROUTE multiplexing technology is applied. In this paper, we propose an audio/video encoder, which is required to provide HDR/WCG supported high quality video service, 10.2 channel/4 object supporting stereo sound service, fixed UHD and mobile HD simultaneous broadcasting service based on ATSC3.0, also we implemented the ATSC 3.0 LDM system for ROUTE/DASH packager, multiplexing system and physical layer transmission/reception, and verified the service ability by applying it to real time broadcast environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.461-475
• /
• 2006

In this paper, it is described about the tri-band mobile antenna system design to provide broadband multimedia and direct broadcasting services using goo-stationary Koreasat 3, simultaneously operated in Ka/K/Ku band. The radiating part of the antenna system with a fan beam characteristic in the elevation plane is composed of the quasi-offset dual shaped reflector and the tri-band feeder. The tri-band feeder is also composed of the Ka/K dual band feeder with the protruding dielectric rod, the circular polarizer, the ortho-mode transducer and the circular-polarized Ku band feed array. Especially, the Ka/K dual band circular polarizer was realized firstly using the comb-type structure. For fast satellite-tracking on the movement, the Ku band feed array has the structure of the $2{\times}2$ active phased array which can make electrical beams. And, the circular-polarized characteristic in the feed array was improved by $90^{\circ}$ rotating arrangement of four radiating elements polarized circularly by a $90^{\circ}$ hybrid coupler, respectively. Four beam forming channels to make electrical beams at Ku band are divided into the main beam channel and the tracking beam channel in the output, and noise temperature characteristics of each channel were analyzed on the basis of the contributions of internal sub_units. From the fabricated antenna system, the output power at $P_{1dBc}$ of Ka_Tx channel was measured more than 34.1 dBm and the measured noise figures of K/Ku_Rx channels were less than 2.4 dB and 1.5 dB, respectively, over the operating band. The radiation patterns with co- and cross-polarization in the tri-band were measured using a near-field measurement in the anechoic chamber. Especially, Ku radiation patterns were measured after correcting each initial phase of active channels with partial radiation patterns obtained from the independent excitation of each channel. The antenna gains measured in Ka/K/Ku band of the antenna system were more than 39.6 dBi, 37.5 dBi, 29.6 dBi, respectively. And, the antenna system showed good system performances such as Ka_Tx EIRP more than 43.7 dBW and K/Ku_Rx G/T more than 13.2 dB/K and 7.12 dB/K, respectively.

• Korean Journal of Oriental Medicine
• /
• v.18 no.2
• /
• pp.65-89
• /
• 2012

Objective : In order to investigate and improve public Korean medical health service satisfaction level, this study was designed. Method : A questionnaire has been conducted on 212 patients who received treatments at six public health centers in the northern part of Gyeongbuk during 15 days between Sep. 24 and Oct. 8, 2011. Result : 1. An Investigation on the usage of herbal clinics in public health centers reveals that 63.7% have received three times or more medical treatments previously and 61.8% have had their illness treated at other medical institutions. In regard to illness 32.1% have had arthritis or muscle aches. 50.9% have taken insurance medication after having had treatments at the public health centers. 66% have assessed acupuncture and moxa cautery the most satisfying. 2. To a question regarding whether herbal health treatment costs higher than that of physician's, the highest response at 31.6% is 'No'. And to a question regarding whether herbal medicines administered at public health centers have more side effects than that of physician's, the highest response at 39.6% is 'No'. 3. To a question regarding whether herbal treatment of public health centers has little effect against acute disease, 48.1% of responses are 'Fair'. To a question regarding whether herbal treatments, when compared with physician's treatments, boost better recovery of patients, 48.1% of responses are 'Fair'. To a question regarding whether herbal medicine is unscientific, when compared with that of western medicine, 38.2% of responses are 'Fair', To a question regarding whether herbal medicine has faster effect on disease than western medicine, 41.0% of responses are 'Fair'. To a question regarding whether herbal medicine is more effective on disease prevention and promotion of health than disease treatment, 38.2% of responses are 'Fair'. And to a question regarding whether the lack of various types of physical therapy devices in herbal medicine, when compared with western medicine causes inconvenience in herbal treatment, 42.0% of responses are 'Fair'. Those responses take up highest portion at each questionnaire. 4. A comparative study between herbal treatments and physician's treatments has also been conducted. To questions regarding which one of the two considering types of disease is the better, responses are the latter accounted for 43.9% against 'Cancer', the latter accounted for 45.3% against 'Endocrine disorders', the former accounted for 30.7% against 'Psychiatric disorders', the latter accounted for 38.2% gainst 'Otolaryngological(ENT) disease', the former accounted for 47.6% against 'Post traumatic stress disorder', and the former accounted for 52.4% against 'Muscle-skeletal disease'. 5. An investigation on frequency of patients' visits via (p<0.05) of subjects show a statistically significant difference. 6. First, an investigation on frequency of reasons of medical treatments reveal that age, occupation, monthly income, and insurance type (p<0.05) of subjects show a statistically significant difference. Secondly, an investigation on frequency of subjects taking insurance medicines after herbal health treatments reveal that monthly income (p<0.05) of subject shows a statistically significant difference. 7. First, an investigation on frequency of a claim that herbal treatments of public health center does not have great effect on acute disease reveals that age, education, and insurance type (p<0.05) of subjects show a statistically significant difference. Secondly, an investigation on frequency of analysis that herbal treatments has faster effect on disease compared with western treatments reveals that education level, religion, monthly income, and insurance type (p<0.05) of subjects show a statistically significant difference. 8. When herbal clinics of public health centers and general herbal medicine institutions are compared, a survey on additional treatments that herbal clinics need the most reveals that education level, monthly income, and insurance type (p<0.05) of subjects show a statistically significant difference. Secondly, an investigation on frequency of subjects who want various forms of herbal medicines reveals that occupation and insurance type (p<0.05) of subjects show a statistically significant difference. Conclusion : In order to improve efficiency of treatments and enhance patient's satisfaction level, this study suggests measures such as providing a differentiated acupuncture treatments as a whole, streamlining an reception procedure, adopting more elaborated computer system for a patient to get proper medical attention, standardizing a treatment duration in order for a maximum result, keeping regular office hours, and optimizing a consultation time for a patient.