• 조명전기설비학회논문지
• /
• 제20권10호
• /
• pp.158-163
• /
• 2006

In this paper, we considered the received signal of the wideband CDMA systems using turbo code in the multipath channel environments, and analyze the performance of the system. This study is to analyze the performance for the variable system bandwidth according to the number of branches of rake receiver by passing the received signal through a rake receiver with a turbo code in Rayleigh fading channel environments. For the design of receiver in wideband CDMA systems, we presented the efficient parameters for the number of iterative decoding and the number of branches of rake receiver.

• 한국통신학회논문지
• /
• 제33권7A호
• /
• pp.751-756
• /
• 2008

In this paper, we propose a modified I/Q diversity scheme receiver of UHF RFID reader system. The modified I/Q diversity receiver is more robust than the conventional homodyne receiver in the wireless noisy, fading channel and phase noise environments by making use of additional axes. In particular, it is shown that the closer the phase difference ${\theta}(t)$ between the reader and the tag to ${\pi}/4$, the larger performance improvement we can get. The performance of the proposed receiver is verified by equations and is demonstrated by the computer simulation for various difference ${\theta}(t)$ cases.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권3호
• /
• pp.137-144
• /
• 2016

In this paper, the performance of ranging measurement, which is generated using two receiver clock offsets in one receiver, was analyzed. A spoofer transmits a counterfeited spoofing signal which is similar to the GPS signal with hostile purposes, so the same tracking technique can be applied to the spoofing signal. The multi-correlator can generate two receiver clock offsets in one receiver. The difference between these two clock offsets consists of the path length from the spoofer to the receiver and the delay of spoofer system. Thus, in this paper, the ranging measurement was evaluated by the spoofer localization performance based on the time-of-arrival (TOA) technique. The results of simulation and real-world experiments show that the position and the system clock offset of the spoofer could be estimated successfully.

• Journal of Mechanical Science and Technology
• /
• 제14권12호
• /
• pp.1403-1411
• /
• 2000

Heat losses from the receivers for a dish-type solar energy collecting system constructed at Korea Institute of Energy Research are analyzed. The Stine and McDonald's model is used to estimate the convection loss. The Net Radiation method and the Monte-Carlo method are used to calculate the radiation heat transfer rate from the inside surface of the receiver to the surroundings. Two different receivers are suggested here and the performances of the receivers are estimated and compared with each other based on the prediction of the amount of heat losses from the receivers. The effects of the receiver shape and the radiation properties of the surface on the thermal performance are investigated. The performance of Receiver I is better than that of Receiver II, and the amount of solar irradiation that is not captured by the captured by the receiver after being reflected by the concentrator becomes significant if the temperature of the working fluid is low.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.459-460
• /
• 2006

In this paper we introduce the implementation of PC-based receiver platform to verify T-DMB middleware APIs. Recently, generic APIs in T-DMB middleware (called DMB MATE API) have been designed to enable inter-operable applications to be downloaded from both the broadcast and telecommunication networks in advance and to be executed on T-DMB receivers from any manufacturers. We also verify the designed MATE API through execution of several applications at the PC-based receiver. In future, the T-DMB middleware verified in PC can be implemented at various receivers such as T-DMB phone and portable T-DMB receiver.

• 한국항공우주학회지
• /
• 제36권9호
• /
• pp.929-937
• /
• 2008

한국항공우주연구원에서 개발하고 있는 KSLV(Korea Space Launch Vehicle)-I 발사체의 비행 안전용 센서의 하나로 활용하기 위하여 개발된 GPS 수신기 시스템은 위성발사체의 특수한 비행환경과 높은 동특성 환경에서도 정상적으로 동작해야 한다. 5년에 걸쳐 개발이 완료된 위성발사체용 GPS 수신기 시스템은 습도, 고온, 저온, 진공, 정현파 및 랜덤진동, 충격, 가속도, 전자파 환경시험 등을 통하여 특수한 환경에서의 성능을 검증하였으며, GPS 시뮬레이터를 이용한 다양한 성능시험을 수행하여 높은 동특성 환경에서도 안정적으로 동작할 수 있음을 확인하였다. 본 논문에서는 위성발사체용 GPS 수신기 시스템의 전 개발과정을 소개하고, 일반적인 GPS 수신기 시스템과 비교하여 개발된 GPS 수신기 시스템의 특수한 기능들을 설명한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제2권1호
• /
• pp.37-49
• /
• 2008

At the present time the task of designing a highly integrated ZigBee radio frequency (RF) receiver with an excellent coexistence performance is still very demanding and challenging. This paper presents a number of system issues and design considerations for a ZigBee RF receiver, namely IEEE 802.15.4, for coexistence with wireless devices in the 2.4-GHz ISM-band. With regard to IEEE 802.15.4, the paper analyzes receiver performance requirements for; system noise figure (NF), system third-order intercept point (system-IIP3), local oscillator phase noise and selectivity. Based on some assumptions, the paper illustrates the relationship between minimum detectable signal (MDS) and various situations that involve the effects of electromagnetic interference generated by other wireless devices. We infer the necessity of much more stringent specification requirements than the published standard for various wireless communication field environments

• 전자공학회논문지A
• /
• 제33A권4호
• /
• pp.37-46
• /
• 1996

In this paper, we analyzed the performance improvement of the DS-CDMA/dPSK cellular mobile communication system with CCI canceller and RAKE receiver techniques in mobile radio channel which is characterized by AWGN, Multi-user interference (mUI) and frequency-selective rayleigh fading. System capacity i.e., number of user per cell has been derived and the evaluated results are shown in figuraes as a function of PN code sequence length, number of RAKE receiver tap, BER and E$_{b}$/N$_{o}$. The voice activity factor is assumed to be 3/8 the number of sectors in a cell 3 and MUI is modeled as gaussian process. From the results, the capacity of the DS-CDMA/DPSK cellular mobile communication system is improved by adopting CCI canceller. When we adopt the RAKE receiver to mitigate the multipath fading, the error performance is improved and the amount of improvement is proportional ot the number of taps L in the case that each tap contains a signal component and the better of improvement can be obtained, the smaller of the SNR difference in each tap. The system capacity is more increased when the CCI canceller and the RAKE receiver is used in cascade.

• 조명전기설비학회논문지
• /
• 제25권5호
• /
• pp.39-44
• /
• 2011

Automatic fire alarm system is set up to automatically detect fire on buildings. Because of economic reasons, P-type receiver and a conventional type fire detector is normally used for automatic fire alarm system in Korea. Because early detection of fire is regarded as important, the need of finding technique of fire location increases. This paper is studied a method to improve a reliability and add a function of fire location detection on a conventional type fire detector and P-type receiver. Fire location is detected by a method that controller attached on the receiver and the detector is read with a time lag. A reliability of fire detection alarm system is improved with a method that false fire alarm is able to decrease using two different principle detector together. This paper is studied for basic data of improvement of low-cost addressable automatic fire alarm system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.25-28
• /
• 2000

In this paper, we choice multicarrier direct-sequence code division multiple access using bandwidth effectively in communication system. Because this system is based on DS-CDMA the same problem is raised. That is, the degradation of the performance is due to multiple access interference. To solve this problem, we proposed the blind adaptive receiver for MC DS-CDMA system. Simulation results show that the proposed blind receiver has more about 0.5(dB) value of SNR than conventional receiver.