• 제목/요약/키워드: receiver (RX)

검색결과 73건 처리시간 0.019초

Tx-Rx간 무선통신이 필요 없는 LLC 컨버터 기반 유도형 무선전력전송 시스템 구현 (Implementation of Inductive Wireless Power Transfer System based on LLC Converter without Wireless Communication between Tx and Rx)

  • 김문영;최신욱;강정일;한종희
    • 전력전자학회논문지
    • /
    • 제24권5호
    • /
    • pp.311-318
    • /
    • 2019
  • In general wireless power transfer systems (WPTSs), power transfer is controlled by the wireless communication between a transmitter (Tx) and a receiver (Rx). However, WPTS is difficult to apply in electronic products that do not have batteries, such as TVs. A WPTS with resonators based on a transformer of LLC series resonant converter is proposed in this study to eliminate wireless communication units between a Tx and an Rx. The proposed system operates at the boundary of the resonance frequency, and the required power can be stably supplied to authorized devices even though some misalignment occurs. Moreover, standby power standards for the electronic product can be satisfied.

Mobile WiMAX 기지국의 최적 출력파워 도출에 관한 연구 (A Study on the Output Power Optimization of Mobile WiMAX Base Station)

  • 김성만
    • 한국통신학회논문지
    • /
    • 제35권4A호
    • /
    • pp.341-349
    • /
    • 2010
  • 본 논문은 차세대 이동통신 기술로 주목받고 있는 IEEE 802.16 기반의 Mobile WiMAX (또는 WiBro) 시스템에서 여러 가지 채널환경조건 및 기지국의 조건을 고려하여 기지국의 출력파워를 최적으로 설계하는 방법에 관한 것이다. 본 논문에서는 다양한 환경조건에서 Mobile WiMAX 시스템의 상/하향 링크버짓(link budget)을 산출하여, 이로부터 Mobile WiMAX 기지국의 최적 출력파워를 도출하는 방법에 대해 정리하였다. 본 논문에서는 MIMO(multiple input multiple output) 기술이 적용된 기존의 2Tx-2Rx 기지국과 여기에 수신단의 감도를 높이기 위해 수신단의 안테나 개수를 4개로 늘린 2Tx-4Rx 기지국과 성능을 향상시키기 위해 새롭게 빔포밍(beamforming) 기술이 적용된 4Tx-4Rx 기지국의 경우 등 총 세 가지 경우에 대하여 최적 출력파워를 도출하였다.

마이크로 컨트롤러를 이용한 TX Leakage Canceller (A TX Leakage Canceller using Micro Controller)

  • 박경태;정진우;노형환;박준석;김형석
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.93-96
    • /
    • 2008
  • A transmitter (TX) leakage cancellation scheme using a Micro Controller Unit (MCU) is introduced. This paper highlights an adaptive anti-leakage signal generation via an MCU, which plays the key role in reducing the TX leakage signal level. High transmitter-to-receiver (TX-to-RX) isolation is verified with measurement results.

  • PDF

TDD 시스템에서 송수신 격리도 향상 방법 (A Method of Improving Isolation Between Tx and Rx Paths in TDD Systems)

  • 강상기
    • 한국정보통신학회논문지
    • /
    • 제13권1호
    • /
    • pp.17-22
    • /
    • 2009
  • TDD 시스템에서는 스위치나 써큘레이터를 이용해서 송수신 경로를 구분한다. 송수신 경로의 격리도가 낮은 경우 송신신호는 수신기에 간섭원으로 작용하며, 수신기의 성능을 악화시킨다. 본 논문에서는 TDD 시스템에서 송신 경로와 수신 경로 사이에 높은 격리도를 갖는 방법을 제안한다. 또한 논문에서 제안한 격리도 향상 방법의 타당성을 검증하기 위해서 제안한 격리도 향상 모듈을 제작하였고, 제작된 격리도 향상 모듈의 특성을 시험하였다. 특성 시험 결과 제작된 격리도 향상 모듈은 30MHz 대역폭에서 44.8dB 이상의 격리도 향상이 있음을 확인하였다.

표면탄성파 필터를 이용한 MHz 대역용 듀플렉서 제작 (Fabrication of 800 MHz band duplexer using SAW filters)

  • 양형국;조현민;박종철
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.367-370
    • /
    • 1998
  • A hybrid-integrated SAW(surface acoustic wave) douplexer including transmitter(Tx) filter, receiver(Rx) filter an dantenna terminal has been studied. The prototype duplxer was designed for CDMA system application in the 800 MHz-band. Ladder type SAW filters consisting of one port SAW resonators wer integrated on epoxy substrate to demonstrate the feasiblity of antenna duplexer. In order to perform the duplexing function, a strip line for impedance transformaton with length of .gamma./4 was inserted at rx path. The fabricted duplexer has an insertion loss of 3.0 dB at Tx path and 3.7 dB at Rx path. The attenuation has more than 40dB.

  • PDF

포토다이오드의 정전용량에 따른 버스트모드 광 수신소자의 수신감도 연구 (Study on Sensitivity of Burst-Mode Optical Receiver Depending on Photodiode Capacitance)

  • 이정문;김창봉
    • 한국광학회지
    • /
    • 제19권5호
    • /
    • pp.343-348
    • /
    • 2008
  • 본 논문은E-PON용 버스트모드 광 수신소자를 개발하여 FTTH의 상용화에 기여하고자 연구되었다. 수신소자는 1.25 Gb/s 데이터 전송속도에서 E-PON의 10, 20 Km OLT Rx규격에 만족할 수 있도록 수신감도를 향상 시키기 위해 정전용량을 최소화하여 제작하였다. 수신감도는 비트 오류율이 $10^{-12}$이고 PRBS가 $2^5-1$일 때 -26 dBm, loud/soft ratio는 23 dB으로 측정되었다. Preamble time과 guard time은 각각 102.4 ns(128 bit)로 설정하였다. 일반적으로 광 수신소자에 주로 사용되는 정전용량이 0.53 pF인 포토다이오드와 정전용량이 최소화된 0.26 pF인 포토다이오드를 비교한 결과 정전용량이 0.26 pF인 포토다이오드로 제작된 버스트모드 광 수신소자 가 수신감도는 0.7 dBm, 대역폭은 190 MHz 더 향상되었다.

Physical Media Dependent Prototype for 10-Gigabit-Capable PON OLT

  • Kim, Jongdeog;Lee, Jong Jin;Lee, Seihyoung;Kim, Young-Sun
    • ETRI Journal
    • /
    • 제35권2호
    • /
    • pp.245-252
    • /
    • 2013
  • In this work, we study the physical layer solutions for 10-gigabit-capable passive optical networks (PONs), particularly for an optical link terminal (OLT) including a 10-Gbit/s electroabsorption modulated laser (EML) and a 2.5-Gbit/s burst mode receiver (BM-Rx) in a novel bidirectional optical subassembly (BOSA). As unique features, a bidirectional mini-flat package and a 9-pin TO package are developed for a 10-gigabit-capable PON OLT BOSA composed of a 1,577-nm EML and a 1,270-nm avalanche photodiode BM-Rx, including a single-chip burst mode integrated circuit that is integrated with a transimpedance and limiting amplifier. In the developed prototype, the 10-Gbit/s transmitter and 2.5-Gbit/s receiver characteristics are evaluated and compared with the physical media dependent (PMD) specifications in ITU-T G.987.2 for XG-PON1. By conducting the 10-Gbit/s downstream and 2.5-Gbit/s upstream transmission experiments, we verify that the developed 10-gigabitcapable PON PMD prototype can operate for extended network coverage of up to a 40-km fiber reach.

피드백 잡음재밍 간섭제거를 위할 시분할 송수신 제어기법 (A Time-Sharing TX/RX Control Technique for the Rejection of Feedback Noise Jamming Interference)

  • 정운섭;나성웅
    • 한국통신학회논문지
    • /
    • 제30권12C호
    • /
    • pp.1201-1207
    • /
    • 2005
  • 전자전장비는 송수신기간의 이격이 충분하지 않을 경우, 송신기에서 방사된 잡음재밍신호는 수신기로 피드백되어 레이더 펄스신호의 수신을 방해한다. 이로 인해, 동일 주파수 대역내에서 펄스재밍과 잡음재밍을 동시에 수행할 수 없다. 본 논문에서 펄스열의 예측게이트를 이용하여 잡음재밍신호를 차단하고 동시에 해당 채별 필터를 동작시켜 레이더 펄스신호를 수신할 수 있는 스위치 메트릭스를 이용한 시분할 송수신 제어기법을 제안한다. 이 기법은 전자전장비의 EPLD 내에 구현되어 실험을 통해 확인되었으며, 다중 재밍환경에서도 동시에 펄스재밍과 잡음재밍을 가능하도록 해준다.

자동 변환 임피던스 매칭 네트워크를 갖는 CMOS FM 수신기 프론트엔드 구현 (Implementation of a CMOS FM RX front-end with an automatic tunable input matching network)

  • 김연보;문현원
    • 한국산업정보학회논문지
    • /
    • 제19권4호
    • /
    • pp.17-24
    • /
    • 2014
  • 본 논문에서 2개의 다른 특성을 갖는 FM 안테나들을 사용할 수 있도록 자동 변환 매칭 네트워크를 갖는 CMOS FM 수신기 프론트엔드 구조를 제안하였고 이를 65nm CMOS 공정을 이용하여 설계하였다. 제안된 FM 수신기는 높은 주파수 선택 특성을 갖는 임베디드 안테나를 사용 시 FM 전체 주파수 밴드에서 일정한 수신감도를 유지하기 위해서 저 잡음 증폭기의 입력 매칭 회로의 공진 주파수를 채널 주파수에 따라 가변이 가능하도록 구현하였다. 구현된 FM 프론트엔드의 시뮬레이션 결과는 약 38dB 전압이득, 2.5dB 이하의 잡음 지수 특성, -15.5dBm의 IIP3 선형성 특성을 보이고 1.8V 전원에 3.5mA 전류를 소모한다.

FMCW 송수신 칩을 이용한 단일 안테나 레이다 센서 (Single Antenna Radar Sensor with FMCW Radar Transceiver IC)

  • 유경하;유준영;박명철;어윤성
    • 한국전자파학회논문지
    • /
    • 제29권8호
    • /
    • pp.632-639
    • /
    • 2018
  • 본 논문에서는 130 nm 공정을 이용한 Ku-band에서의 송수신 칩을 사용하여 제작된 단일 안테나 모듈을 제안한다. 레이다 수신부에서 DCOC 피드백을 사용한 STC(sensitivity time control)가 거리에 따라 일정한 SNR을 유지한다. 또한 수신부 RF단에서 gain control을 통하여 수신단의 dynamic range를 조절할 수 있다. 칩의 출력 파워는 9 dBm이고, 수신부의 총 이득은 82 dB이다. 단일 안테나에서 Tx 신호가 Rx로 직접 누설되는 것을 막기 위해 stub-tuned hybrid coupler를 사용하였다. 최대 측정거리는 6 m이고, 혼안테나와 금속판을 사용하여 측정하였다.