• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.157-162
• /
• 2002

This study is intended to present a reference data for effective quality control of concrete through comparing the rebound value of P type schmidt hammer with the compressive strength with variation of mix proportion and curing condition. According to the results, the air-curing specimen shows the higher rebound value than standard specimen except high strength in the whole. Also the vertical stroke shows higher rebound value than horizontal stroke in standard specimen, however, the rebound value of the two does not show prominent difference in air-curing specimen. The estimation equation of compressive strength derived from this experiment estimates the compressive strength more largely than the estimation equation in P type schmidt hammer manual. Therefore it is thought that the new estimation equation that fits our condition will have to be presented.

• 열처리공학회지
• /
• 제8권4호
• /
• pp.318-325
• /
• 1995

Information of change of hardness values during applying load is needed often to control the quality of metal products efficiently, but the relation between applied stress and hardness has not been established. In this paper the theoretical relation between the rebound hardness and stress was examined briefly and the experiment was performed with some materials. Materials used in test were mild steel(SB41), 7-3 brass and copper, which were widely used in the commercial plants. Hardness was measured during stress applied using the Equo-Tip hardness tester as a kind of rebound hardness tester. Hardness values decreased as tensile stress increased, the decreasing rate was effected by the Young's modulus of each material, and the rebound hardness values showed linear relationship with the applied stress in elastic region.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.287-293
• /
• 2005

In the present study, to determine the flow rate of droplets supplied to heat transfer surface after (j-1)th rebound, $D_X[j{\ge}2]^{\ast}$, it was assumed that the rebound droplets are distributed according to the Gaussian distribution from 0 to L, in which the flight distance L is determined by maximum flight distance $L_{max}$. We also assumed that $L_{max}$ is dependent on the air flow velocity and mean size of droplets. The local heat flux of a dilute spray in high temperature region was predicted using the newly evaluated $D_X[j{\ge}2]^{\ast}$. In addition, the predicted results by the present model were compared with the existing experimental data.

• 한국재난관리표준학회지
• /
• 제2권4호
• /
• pp.59-65
• /
• 2009

현재 대부분 사용되고 있는 반발경도법을 이용한 강도 추정식을 서울의 대표적인 지하구조물에 적용할 경우 준공년도에 따른 재령계수의 적용이 부적합한 것으로 판단됨에 따라 본 연구에서는 최근 8년간 수행된 서울지하철 정밀안전진단결과를 이용하여 코어의 일축압축강도와 동일위치에서 실시된 반발경도 시험결과와의 상관관계에 준공년도를 고려하여 공용중인 박스 및 터널구조물에 대한 합리적인 강도평가 추정식을 제시하였다.

• 한국운동역학회지
• /
• 제17권4호
• /
• pp.107-113
• /
• 2007

The purpose of this study were to investigate the effects of knee brace on the knee muscular neuro-biomechanical variables during the rebound in female highschool basketball players. Twelve high school female ($17.9{\pm}0.8years$) basketball players rebound jumped for maximal vertical height to sufficiently stress the anterior cruciate ligament with and without knee brace. Kinematic data were collected to estimate the knee flexion, abduction angles and jump height. The EMG data from the biceps femoris and rectus femoris was used to estimate the ratio of quadriceps muscle activity. Female athletes with knee brace showed more reduced the knee abduction angle and the ratio of quadriceps muscle activity at foot contact phase than without knee brace. In conclusion, Female athletes with brace reduced knee anterior cruciate ligament loads.

• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.157-167
• /
• 1999

Among several non-destructive testing methods, ultrasonic pulse velocity method and rebound index method have been widely used for the evaluation of concrete strength. However, such methods might not provide accurate estimated results since factors influencing the relationship between strength and either ultrasonic pulse velocity or rebound index are not considered. In this paper, the evaluation method of concrete strength using rod-wave velocity measured by impact-resonance method is proposed. A basic equation is obtained by the linear regression of velocity vs, strength data at specific age and then, aging factor is employed in the equation to consider the difference of the increasing rate between wave velocity and strength. Strengths predicted by the proposed equation agree well with test results. Furthermore, the combined method of rod-wave velocity and rebound index is proposed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.177-183
• /
• 1999

The major object of this study is to investigate experimentally the experimental equation by the non-destructive testing methods of ultrasonic pulse velocity, rebound number, combined method of ultrasonic pulse velocity and rebound number, maturity which are applicable to the evaluation of compressive strength of concrete at early ages. Also test result of mix are statistically analyzed to infer the correlation coefficient between the maturity and the compressive strength of concrete. The results show good application of Logistic curve for estimating strength development under various curing temperature. The relation between ultrasonic pulse velocity, rebound number, combined method of ultrasonic pulse velocity and rebound number and compressive strength of concrete have low correlation coefficient, but maturity method show good correlation coefficient.

• ETRI Journal
• /
• 제45권3호
• /
• pp.365-378
• /
• 2023

ARIA is a block cipher proposed by Kwon et al. at ICISC 2003 that is widely used as the national standard block cipher in the Republic of Korea. Herein, we identify some flaws in the quantum rebound attack on seven-round ARIA-DM proposed by Dou et al. and reveal that the limit of this attack is up to five rounds. Our revised attack applies to not only ARIA-DM but also ARIA-MMO and ARIA-MP among the PGV models, and it is valid for all ARIA key lengths. Furthermore, we present dedicated quantum rebound attacks on seven-round ARIA-Hirose and ARIA-MJH for the first time. These attacks are only valid for the 256-bit key length of ARIA because they are constructed using the degrees of freedom in the key schedule. All our attacks are faster than the generic quantum attack in the cost metric of the time-space tradeoff.

• 콘크리트학회논문집
• /
• 제17권3호
• /
• pp.313-322
• /
• 2005

최근 들어 리모델링시장이 점차 신축시장의 대체시장으로 부각되고, 재건축아파트에 대한 안전진단의 문제가 사회의 주요 관심사가 되면서 기존 콘크리트 구조체의 상태에 대해 체계적이고 과학적인 구조물 진단 및 평가가 요구되고 있으며, 비파괴 시험방법에 의한 콘크리트 압축강도를 추정하기 위한 데이터의 신뢰성에 대한 중요성이 점점 증대되고 있다. 본 연구에서는 선 타격 개념의 반발도 시험기를 적용하여 콘크리트 압축강도 추정의 신뢰성을 향상시키는 방안을 모색하고, 재령 및 타격각도에 따라 선 타격 반발도 시험기에 적용할 수 있는 압축강도 추정식을 제안하고자 하였다. 연구 결과, 선 타격 반발도 시험기는 재령별, 타격각도별로 별도의 추정식을 제안하는 것이 콘크리트 압축강도 추정의 신뢰성을 향상시키는데 긍정적인 것으로 나타났으며, 압축강도와 반발도 사이의 상관관계는 초기 및 중기재령, 그리고 타격각도별로 초기재령 $-45^{\circ}$를 제외한 모든 부분에서 선 타격 반발도 시험기 25mm가 가장 높은 것으로 나타나 기존의 슈미트해머에 비해 콘크리트 압축강도 추정의 신뢰성을 높일 수 있는 방안이 될 것으로 분석되었다.

• 콘크리트학회지
• /
• 제10권4호
• /
• pp.125-133
• /
• 1998

본연구에서는 강섬유와 실리카흄의 혼입이 숏크리트의 리바운드율에 미치는 영향을알아보기 위하여 현장실험을 수행하였다. 실험은 보강방법(강섬유와 와이어메쉬), 강섬유 혼입율(0.0%, 0.5%. 0.75%, 1.0%), 실리카 흄 혼입율(0.0%, 10.0%), 타설부위(side wall, shoulder, crown)등의 4가지 변수를 중심으로 수행되었다. 실험결과, 타설부위가 side wall인 경우 , 강섬유보강숏크리트는 강섬유의 혼입률이 증가할수록 와이어메쉬보강숏크리트에 비해 20%~35%의 리바운드율의 감소효과를 나타내었다. 또한 이러한 리바운드율의 감소효과는 10%의 실리카흄을 혼입한 경우에는 더욱더 큰 폭으로 감소되는 경향을 보였으며, 타설부위가 shlulder와 crown인 경우에도 유사한 결과를 나타내었다. 한편 본 연구에서는 강섬유보강숏크리트에대한 기존의 2단계 리바운드 현상을 기초로, 골재와 강섬유간의 미시적인 상호작용에 따른 4단계의 리바운드 발생 현상을 추정하였다.