• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.59-67
• /
• 1983

An experiment on the rearing of tilapia stocked in closed recirculating tanks eliminating biological filter beds was carried out at the Fish Culture Experiment Station of the National Fisheries University of Pusan, from May 18 through October 21, 1982, and the growth rates, feed conversion, water quality, spawning prevention and space utilization efficiency were discussed. Finally discussed is the feasibility on the establishment of commercial production units. On the water quality, the water temperature ranged from $22.8^{\circ}C\;to\;29.1^{\circ}C$, and total ammonia arround 10 ppm or slightly up. Maintaining phytoplankton bloom was not successful probably because of the active consumption by the heavily stocked tilapia. Several attempts were made by changing the culture water with green water from a nearby earthen pond with results of fading-away in a couple of days. Feed conversions were relatively high ranging from 0.9 to 1.2 except for experiment 1 when the fish were not fully recovered from weakened wintering state. The feed used was partly laboratory prepared $25\%$ protein diet and mostly commercially available $39\%$ protein carp feed. Spawning was completely controlled during the experiment, resulting from density effect, which ranged from 10kg to 40.7kg per square meter with water depth of 0.5 to 0.6m. Space utilization efficiency was very high. Daily net production from the experiment division 3, which showed the highest result, was 6.206 kg per tank, which is calculated 3,235 metric tons per hectare per year, This time, water temperature ranged from 27.8 to $29.1^{circ}C$, average being $28.4^{circ}C$, and total ammonia arround 10 ppm. An estimation for the commercial set-up of the production system based on the results of experiment divisions which had initial stocking rate $15\;kg/m^2$ or up, is made. If the total facility, 8 tanks comprising $56\;m^2$ in surface area, is used for the present study, the yield would become 5,639 kg from 200 day rearing, which would be possible under double sheets vinyl house without additional heating, and it is thought feasible in the economic view point, when 10 or more units are operated.

• Journal of Life Science
• /
• v.22 no.12
• /
• pp.1672-1679
• /
• 2012

The effect of high stocking density (HSD) on the expression of stress and lipid metabolism associated genes in the liver of broiler chickens was examined by chicken genome array analysis. The chickens in a control group were randomly assigned to a $495cm^2/bird$ stocking density, whereas the chickens in a HSD group were arranged in a $245cm^2/bird$ stocking density with feeding ad libitum for 35 days. The chickens assigned to the HSD group had a significantly lower body weight, weight gain, and feed intake compared with those of the control group (p<0.05). The mortality of chickens was higher in the HSD group than in the control group. The microarray analysis indicated up-regulation of stress associated genes such as HMGCR, $HSP90{\alpha}$, HSPA5 (GRP78/Bip), DNAJC3 and ATF4, and down-regulation of interferon-${\gamma}$ and PDCD4 genes. The endoplasmic reticulum stress associated genes, HSPA5 (GRP78/Bip), DNAJC3 and ATF4, were highly expressed in the HSD group. The genes, ACSL5, TMEM195 and ELOVL6, involved in fatty acid synthesis, were elevated in the HSD group. The genes, ACAA1, ACOX1, EHHADH, LOC423347 and CPT1A, related to fatty acid oxidation, were also activated in the HSD group. These results suggest that a HSD rearing system stimulates the genes associated with fatty acid synthesis as well as fatty acid oxidation in the liver of broiler chickens.

• Korean Journal of Poultry Science
• /
• v.39 no.4
• /
• pp.305-310
• /
• 2012

This work was carried out to investigate performance and carcass yield of large-type broilers at different stocking densities. Treatments were T1 (9.1 birds/$m^2$), T2 (10.3 birds/$m^2$) and T3 (11.5 birds/$m^2$) by the stocking density. Four hundred eight 1-day-old Arbor Acre broiler chicks were used for six weeks (starter, 0~1 wks; earlier, 1~3 wks; finisher, 3~6 wks) and divided into 3 treatments (4 replications/treatment, 30, 34 or 38 birds/replication). Research indexes were rearing viability ratio, body weight, body weight gain, feed intake, feed conversion ratio, production efficiency factor and carcass ratio. Rearing viability ratio (%) was 89% or more for all treatments and there was no significant difference on weekly rearing viability ratio (%). Body weight of T2 was the greatest and that of T3 was the lowest at 1 weeks old (P<0.05). Body weight gain of T2 was the greatest and that of T3 was the lowest at 0~1 weeks old (P<0.05). However, body weight gain of T3 was the greatest and that of T1 was the lowest at 1~2 weeks old (P<0.05). Body weight gain of T2 was the greatest as 3,031 g among treatments at 0~6 weeks old (P<0.05). Feed intakes of T1, T2 and T3 were 1,417 g, 1,265 g and 1,355 g, respectively, and that of T1 was the greatest among treatments (P<0.05). There was no significant difference on body weight, body weight gain and feed intake. Feed conversion ratio of T1 was the greatest among treatments at 1~2 wks, 3~4 wks and 0~6 wks old (P<0.05). Production efficiency factors of T1, T2 and T3 were 363.5, 388.3 and 358.3, respectively, and there was no significant difference among treatments. Wing meat ratio of T1 was the higher compared to other treatments at the age of 4 wk (P<0.05). There was no significant difference on carcass ratio and partial meat ratio among treatments. Neck meat ratio of T2 was the lowest among treatments (P<0.05). This result may provide the standard data of different stocking densities for large-type broiler and the further research is needed.

• Journal of Life Science
• /
• v.23 no.12
• /
• pp.1454-1459
• /
• 2013

This study investigated the effects that water temperature and the administration of estradiol-17${\beta}$ (E2) had on the sex ratio and growth of the Japanese eel, Anguilla japonica. Glass eels (total length${\fallingdotseq}$6.5 cm) were differentiated into an E2 group and an E2-free group and then they were reared for about four months at three water temperature levels of $20^{\circ}C$, $24^{\circ}C$, and $28^{\circ}C$. The results showed that the young eels survived normally at the rearing water temperature of ${\geq}24^{\circ}C$, and grew to a mean size of 20 cm (total length). In the E2-free group, temperature was not found to increase the sex ratio (feminizing rates); however, the sex ratio of the E2-administrated group was found to be a little higher at a high temperature ($28^{\circ}C$). The growth of the E2 group was lower than the growth of the E2-free group at $24^{\circ}C$ and the E2 concentration levels in the plasma at $24^{\circ}C$ were found to be significant after the end of the E2 administration period (178 days). Therefore, we thought that long-term administration of E2 must be considered to be the reason for growth decline in spite of the prominent sex ratio effect. Our results indicate that temperature was not related to an increase in the feminizing rate (sex ratio) in the Japanese eel, Anguilla japonica, and other environmental factors (rearing density, salinity, etc.) that have the possibility of inducing ovarian differentiation must be investigated.

• Korean Journal of Agricultural Science
• /
• v.30 no.1
• /
• pp.11-19
• /
• 2003

The life-cycle of the aphid-parasite, Aphidius gifuensis, took 11.9 days at $25^{\circ}C$ and 12.1 days at $30^{\circ}C$. The female appearance rate of A. gifuensis was the best at $20{\sim}25^{\circ}C$ compared to the other temperatures. Optimum rearing temperature of Aphidius gifuensis was $20{\sim}25^{\circ}C$ Optimum temperatures for A. gifuensis emergence were $20^{\circ}C$ and $25^{\circ}C$ with 99.1% and 98.2%, respectively. However the emergence rate of Aphidius gifuensis was 58.8% at $10^{\circ}C$. There was a positive correlation between A. gifuensis adult activity and temperature, but there was a negative correlation between developmental period of Myzus persicae nymph and temperature. Among the pests occurring in pepper greenhouse, dominant species was M. persicae and its density was 6~1,024 per plant. The damaged fruit rate by Helicoverpa assulta was 3.3~53.3%. The number of aphid and mummy in the A. gifuensis released plot were 173.5 and 10 in June, 1.8 and 17 in July, 2000, respectively. The numbers of Aphidius gifuensis were 7.5 and 0.4 in May, 27.1 and 2.1 in June, 2001, respectively. The suppressive effects on M. persicae in A. gifuensis released plot was better than the control plot, but there was no significant difference compared to the pesticide-sprayed plot. The first leaf length and the stem width in the A. gifuensis released plot, the control plot, and the pesticide-sprayed plot were not significantly different, but the A. gifuensis released plot showed the highest yield among the plots.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.444-454
• /
• 2016

This study was designed to examine the characteristics of sawdust and cocopeat bedding materials, including physicochemical properties (Exp. I) and on-farm trial (Exp. II). In Exp. I, the proportion of particle size was in the order of sawdust>cocopeat India>cocopeat Vietnam (p<0.05), and cocopeat contained higher proportion of small particles ($250{\mu}m$+below $250{\mu}m$) than sawdust, causing a dust production problem. Bulk density was cocopeat India>cocopeat Vietnam>sawdust (p<0.05), thus cocopeat treatments showed 4.4 times higher bedding cost than sawdust. The water absorption rates were 702.0% in cocopeat India, 678.3% in cocopeat Vietnam, and 444.0% in sawdust, showing cocopeat had approximately 1.5 times higher water absorption rate than sawdust. Moisture evaporation rates after 12 h of air blowing (2.00 m/s) were higher (p<0.05) in cocopeat Vietnam (80.4%) than sawdust (71.2%) and cocopeat India (72.8%). In vitro ammonia emissions were higher (p<0.05) in sawdust ($2.71mg/m^2/h$) than cocopeat India ($1.59mg/m^2/h$) and Vietnam ($1.22mg/m^2/h$), and total ammonia emissions were higher (p<0.05) in sawdust ($37.02mg/m^2$) than cocopeat India ($22.51mg/m^2$) and Vietnam ($13.60mg/m^2$). In Exp. II, an on-farm trial was conducted with 48 Hanwoo cattle in 16 pens using the same bedding materials as in Exp. I, with fan (blowing 2.00 m/s) and no fan treatments, and feed bunk side (FB) and water supply side (WS) within a pen (4.5 m, $width{\times}9.0m$, length). Beddings were replaced with fresh bedding materials when moisture concentrations were over 65%. No interactions among treatments were detected for moisture concentration and increment rates, and ammonia concentrations, but a significant effect was observed (p<0.01) for each of the treatments. Both concentrations and increment rate of moisture were higher (p<0.01) in the beddings without fan than with fan. Moisture concentrations and increment rate within a pen were also higher (p<0.01) in FB than WS. Thus, the whole no-fan-FB and sawdust-fan-FB were replaced with fresh bedding material between 4 to 5 experimental weeks. The ammonia concentrations and pH of beddings were not significantly different among treatments. Therefore, using cocopeat bedding with a blowing fan can extend twice the bedding utilization period, and WS within a pen showed twice the bedding-life compared to FB. Despite the outstanding characteristics of cocopeat compared with sawdust, using cocopeat as an alternative for sawdust bedding is not recommended for cattle management, considering it has 4.4 times higher bedding cost and a dust production problem.

• Journal of Aquaculture
• /
• v.6 no.3
• /
• pp.159-171
• /
• 1993

The effects of environmental factors (density, light, temperature) and live food on growth and survival rate of zoea and mysis of fleshy shrimp, Penaeus chinensis, were examined. The percent survival rates at the culture densities of 200 and 300 larvae per liter were significantly higher than that of 500 larvae per liter (p< 0.05). The percent survival rates at the culture densities of 100, 200, 300 and 500 larvae per liter were $90.3^{ab},\;95.2^a,\;94.3^a\;and\;86.7^b\%$ (p< 0.05). The effects of light conditions with diatom premix diet showed that continuous light was the best for the survival rate, $96.5\%$. Natural light and continuous darkness showed the survival rates $79.0\%\;and\;4.3\%$, respectively. On the rearing temperature, the survival rates were $97.3\%\;at\;19^{\circ}C\;and\;96.7\%\;at\;22^{\circ}C$ with little difference but the higher temperature resulted in faster growth. The survival rate was $51.6\%;at\;25^{\circ}C$ thus showing significant decrease compared to $19^{\circ}C\;and\;22^{\circ}C$. At this temperature the growth was also suffered. With regard to dietary value of live food, both the best survival rate and the fastest growth were obtained when 6 mixed species of diatom (A. normaii, C. simplex, N closterium, P. tricornutum, S. costatum and T. weissflogii) were provided. When single species was supplied the best survival rate $(82.1\%)$ was obtained with S. costatum, but the other species resulted in much inferior survival rates $(below\;80.0\%)$ and poor growth.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.4
• /
• pp.599-605
• /
• 2016

In this study, two experiments were conducted to investigate the physicochemical characteristics (Exp. I) of bedding materials such as rice hulls (RH), sawdust (SD), wood shavings (WS) and sawdust+wood shavings (S+W; 1:1 in volume), and utilization of these beddings except RH (Exp. II) for rearing beef cattle. In Exp. I, the distribution of particle size (%) with $250{\mu}m$ and below $250{\mu}m$ was greater (p<0.05) in SD (30.4) than RH (4.4), WS (18.8) and S+W (20.1). Bulk density ($kg/m^3$) of bedding materials was directly proportional to the percentage of $250{\mu}m$ and below $250{\mu}m$ particles, 178, 46, 112, and 88 for SD, WD, S+W and RH, respectively. Water absorption rate (%) after submersion in water for 24 h was higher (p<0.05) in WS (540.2) compared to SD (270.2), S+W (368.2). The S+W had an intermediate value of the absorption rate between SD and WS, but had an outstanding durability of water absorption capacity. Moisture evaporation rate (%) for 12 h was higher (p<0.05) in WS (75.4) than SD (70.5), S+W (72.2) and RH (57.8). Average ammonia emission ($mg/m^2/h$) for 36 h was higher (p<0.05) in RH (3.15) than SD (1.70), WS (1.63), and S+W (1.73). In Exp. II, thirty six Hanwoo cows were allocated in 9 pens with one side on feed bunk side (Side A) and another side equipped with water supply (Side B) for 3 weeks with duplicated periods. Average moisture concentrations (%) of beddings were higher (p<0.05) in WS (side A, 65.7; side B, 57.9) than SD (side A, 62.5; side B, 52.2) and S+W (side A, 61.6; side B, 50.7). Regardless of types of beddings, moisture concentrations (%) of beddings within a pen were lower (p<0.05) at side B than A, implying longer period of utilization. These results suggest that using S+W would be a better choice than SD or WS alone, considering physicochemical characteristics and economics, and RH is not a suitable material as a bedding for beef cattle.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.51-60
• /
• 2015

In Korea, 69.4 % of duck farms had utilized conventional plastic greenhouses. In this facilities, there are difficulties in controlling indoor environments for raising duck. High rearing density in duct farms also made the environmental control difficult resulting in getting more stressed making their immune system weaker. Therefore, a facility is needed to having structurally enough solidity and high efficiency on the environmental control. So, new design plans of duck house have recently been conducted by National Institute of Animal Science in Korea. As a study in advance to establish standard, computational fluid dynamics (CFD) was used to estimate the aerodynamic problems according to the designs by means of overall and regional ventilation efficiencies quantitatively and qualitatively. Tracer gas decay (TGD) method was used to calculate ventilation rate according to the structural characteristics of duck houses including installation of indoor circulation fan. The results showed that natural ventilation rate was averagely 164 % higher than typically designed ventilation rate, 1 AER ($min^{-1}$). Meanwhile, mechanically ventilated duck houses made 81.2 % of summer ventilation rate requirement. Therefore, it is urgent to develop a new duck house considering more structural safety as well as higher efficiency of environmental control.

• Journal of Life Science
• /
• v.28 no.5
• /
• pp.563-568
• /
• 2018

The insect industry is a promising agricultural resource and expected to grow steadily. In Korea, Gryllus bimaculatus and the larvae of Tenebrio molior, Protaetia brevitarsis, and Allomyrina dichotoma were listed as general food ingredients. As interest in these edible insects increases, rearing techniques and nutritious food sources are needed for mass production. In this study, wheat bran, dog feed, and pig feed were investigated for their effects on the larval growth of P. brevitarsis and A. dichotoma. When fermented sawdust with 30% wheat bran was used, the larval survival rate of P. brevitarsis and A. dichotoma (p=0.244341 and p=0.007966, respectively) and growth rate (p=0.001400 and p=0.000051, respectively) were significantly lower than those of the control (fermented sawdust with no supplement). Therefore, fermented sawdust with a high density of wheat bran was inappropriate for both insects. When fed fermented sawdust with 2.5 or 5% of dog and pig feed, the survival rate and growth rate of the larvae were higher than those of the control. Interestingly, the maximum larval weight with 2.5% dog feed was increased by $3.35{\pm}0.10g$ and $32.59{\pm}0.79g$ for P. brevitarsis and A. dichotoma, respectively. In addition, the larval period of both was shorter than that of the control by 40 days or more. Therefore, it is considered that animal feed can be used as a feed source for these edible insects.