• Korean Journal of Optics and Photonics
• /
• v.4 no.2
• /
• pp.145-156
• /
• 1993

From the optimal system specifications of optical parts in rear projection TV focused on competitive price and performances, we designed and developed projection lens which is able to be used on current broadcast standard NTSC and HDTV in common. Through the serial processes, which are initial design of all aberrations free, aspherization of the plastic lenses, optimization with tolerances and manufacturability, and athermalization, the lens was designed. The developed CRT-lens ass'y could display the 40-55 inches image and it's resolution is more than 1000 TV-lines.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.161-162
• /
• 2000

We propose multi-layer aspheric lenticular lens for rear projection screen to provide wide viewing angle. Each pitch of lenticular lens sheet is divided by three region and image light from projection optical system is propagated widely on each region due to different focal point. Besides, to improve vertical viewing angle of screen, we propose glass bead embedded screen on observer side of lenticular lens.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.463-466
• /
• 2005

While recent display devices are becoming light and slim, the size of a screen is especially the important issue in the field of display devices. Furthermore, it is also required that the projection TV, a large screen display device, be able to represent higher resolutions as the digital broadcasting is set off. In order to realize high resolutions in a DLP projection TV, the number of pixel on DMD should be increased. However, a large number of pixels make it difficult to realize resulting small sized pixels and this cause the increase in cost. Therefore, we propose a simple and improved pixel enhancement actuator using the existing DMD by offsetting half pixels repeatedly in the vertical direction.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.34-35
• /
• 2002

Large-screen projectors for video applications and computer monitors are convenient instruments for conference presentations as well as for TV use at home. Recently, CRT and LCD projectors have achieved higher resolutions and luminance in the projection TV The large surface of the CRT compared to the LCD allows a great number of pixels to be displayed, while simultaneously providing maximum brightness of the final picture. (omitted)

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.291-299
• /
• 1998

In the rear projection TV, the optimal system configurations of optical parts are presented, which are focused on competitive price and performances. From the initial design with five Seidel aberrations free, aspherization of the plastic lenses, and optimization with tolerances, a new lens consisting of two plastic and one glass lenses was designed. It is able to be used on current broadcast standard NTSC and digital TV in common. The developed CRT-lens assembly could display the 40 to 50 inch image and its resolution is more than 800 TV-lines.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.3
• /
• pp.43-52
• /
• 2023

When a children's school bus stops on the road, the operator enables an amber flashing light (indicating stopping or slowing) or a red flashing light (indicating that children are getting on and off). Drivers of vehicles passing by the stopped school bus, as well as vehicles in adjacent lanes to the school bus must stop temporarily. However, many drivers are not aware of the laws and do not comply with them, so children are exposed to an increased risk of being hit, especially at night as the color recognition of the vehicle is significantly lower than during the day. In our experiments, messages and shapes using light were projected to the front and rear of a parked school bus, in addition to its red lights flashing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1271-1280
• /
• 2012

In the recent parking assistant systems, finding out the distance to the object behind a car is often performed by the range sensors such as ultrasonic sensors, radars. However, the installation of additional sensors on the used vehicle could be difficult and require extra cost. On the other hand, the motion stereo technique that extracts distance information using only an image sensor was also proposed. However, In the stereo rectification step, the motion stereo requires good features and exacts matching result. In this paper, we propose a fast algorithm that extracts the accurate distance information for the parallel parking situation using the consecutive images that is acquired by a rear-view camera. The proposed algorithm uses the quadrangle transform of the image, the horizontal line integral projection, and the blocking-based correlation measurement. In the experiment with the magna parallel test sequence, the result shows that the line-accurate distance measurement with the image sequence from the rear-view camera is possible.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.56-62
• /
• 2005

Because of the wide plane and the curved field of CRT rear projection high definition television, its MTF(modulation transfer function) can't be easily measured by the usual forward testing method. Then we propose a backward testing method for the MTF so that the object plane and the image analyzer of forward testing are located at positions opposite each other. We prefer to use the backward testing method because the forward testing method has poor accuracy caused by very small numerical aperture, low spatial resolutions, and long depth of focus. We found that the backward testing method was very easy to align and had high repeatability. We confirmed the confidence of results obtained by the backward testing method in comparison with designed results.

• Journal of Welding and Joining
• /
• v.34 no.2
• /
• pp.1-10
• /
• 2016

The use of materials for modern lightweight auto-bodies is becoming more complex than hitherto assemblies. The high strength materials nowadays frequently used for more specific fields such as the front and rear sub frames, seat belts and seats are mounted to the assembled body structure using bolt joints. It is desirable to use nuts attached to the assembled sheets by projection welding to decrease the number of loose parts which improves the quality. In this study, nut projection welding was carried out between a nut of both boron steel and carbon steel and ultra-high strength hot-stamped steel sheets. Then, the joints were characterized by optical and scanning electron microscope. The mechanical properties of the joints were evaluated by microhardness measurements and pullout tests. An indigenously designed sample fixture set-up was used for the pull-out tests to induce a tensile load in the weld. The fractography analysis revealed the dominant interfacial fracture between boron steel nut weld which is related to the shrinkage cavity and small size fusion zone. A non-interfacial fracture was observed in carbon steel nut weld, the lower hardness of HAZ caused the initiation of failure and allowed the pull-out failure which have higher in tensile strengths and superior weldability. Hence, the fracture load and failure mode characteristics can be considered as an indication of the weldability of materials in nut projection welding.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.304-305
• /
• 2012

본 연구는 후면투사 방식을 이용한 디지털 입체 광고 장치에 관한 것으로서, 구체적으로 역상조각법 방식(Involved Sculpture)으로 형성되는 스크린 및 상기 개체의 일부 형상의 영상을 투사하는 프로젝터를 이용하였다. 스크린을 입체적으로 형성함으로써 마네킹 전체의 통일감을 주고 위화감을 최소화 할 수 있고, 스크린을 역상 조각법에 의하여 형성함으로써 관람자의 위치에도 불구하고 관람자 자신이 주목받는 것 같은 효과를 줄 수 있다.