• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.4
• /
• pp.167-174
• /
• 2002

This study describes a fetal heart rate(FHR) estimation algorithm using phonogram. Using a phonogram amplifier, various fetal heart sounds are collected in a university hospital. The FHR estimation algorithms consists of a lowpass filter, decimation, envelop detection, pitch detection, and post-processing. The post-processing is the FHR decision procedure using all informations of fetal heart rates. Using the algorithm and other parameters of fetal heart sound, a fetal monitoring software was developed. This can display the original signals, the FFT spectra, FHR and its trajectory. Even though the fetal phonogram amplifier detects the fetal heart sounds well, the sound quality is not so good as the ultrasonography. In case of very week fetal heart sound, autocorrelation of it showed clear periodicity. But two main peaks in one period is an obstacle in pitch detection and peaks are not so vivid. The proposed FHR estimation algorithm showed very accurate and stable results. Since the developed software displays multiple parameters in real time and has convenient functions, it will be useful for the phonogram-style fetal monitoring device.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.176-184
• /
• 2023

Points of interest (POIs) are widely used in tourism recommendations and to provide information about areas of interest. Currently, situation judgement using POI and GPS data is mainly rule-based. However, this approach has the limitation that inferences can only be made using predefined POI information. In this study, we propose an algorithm that uses POI data, GPS data, and schedule information to calculate the current speed, location, schedule matching, movement trajectory, and POI coverage, and uses machine learning to determine whether to stay or go. Based on the input data, the clustered information is labelled by k-means algorithm as unsupervised learning. This result is trained as the input vector of the SVM model to calculate the probability of moving and staying. Therefore, in this study, we implemented an algorithm that can adjust the schedule using the travel schedule, POI data, and GPS information. The results show that the algorithm does not rely on predefined information, but can make judgements using GPS data and POI data in real time, which is more flexible and reliable than traditional rule-based approaches. Therefore, this study can optimize tourism scheduling. Therefore, the stay detection algorithm using GPS movement trajectories and POIs developed in this study provides important information for tourism schedule planning and is expected to provide much value for tourism services.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.632-637
• /
• 1992

Recently many dynamics control algorithms using robot dynamic equation have been proposed. One of them, Kawato's feedback error learning scheme requires neither an accurate model nor parameter estimation and makes the robot motion closer to the desired trajectory by repeating operation. In this paper, the feedback error learning algorithm is implemented to control a robot system, 5 DOF revolute type movemaster. For this purpose, an actuator dynamic model is constructed considering equivalent robot dynamics model with respect to actuator as well as friction model. The command input acquired from the actuator dynamic model is the sum of products of unknown parameters and known functions. To compute the control algorithm, a parallel processing computer, transputer, is used and real-time computing is achieved. The experiment is done for the three major link of movemaster and its result is presented.

• Journal of Biomedical Engineering Research
• /
• v.10 no.2
• /
• pp.117-124
• /
• 1989

The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan`s method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.67-69
• /
• 2007

PMSM (Permanent Magnet Synchronous Motor) current control is a most inner loop of electromechanical driving systems and it plays a foundation role in the hierarchy's control loop of several mechanical machine systems. In this paper, a simple RMRAC control scheme for the PMSM is proposed in the synchronous frame. In the synchronous current model, the input signal is composed of as a calculated voltage by adaptive laws and system disturbances. The gains of feed-forward and feed-back controller are estimated by the proposed e-modification methods respectively, where the disturbances are assumed as filtered current tracking errors. After the estimation of the disturbances from the tracking errors, the corresponding voltage is fed forward to control input to compensate for the disturbances. The proposed method is robust to high frequency disturbances and has a fast dynamic response to time varying reference current trajectory. It also shows a good real-time performance duo to it's simplicity of control structure. Through the simulations considering several cases of external disturbances and experimental results, efficiency of the proposed method is verified

• The KIPS Transactions:PartB
• /
• v.16B no.5
• /
• pp.347-358
• /
• 2009

In this thesis, we develop a vision based hand motion recognition system using a camera with two rotational motors. Existing systems were implemented using a range camera or multiple cameras and have a limited working area. In contrast, we use an uncalibrated camera and get more wide working area by pan-tilt motion. Given an image sequence provided by the pan-tilt camera, color and pattern information are integrated into a tracking system in order to find the 2D position and direction of the hand. With these pose information, we estimate 3D motion plane on which the gesture motion trajectory from approximately forms. The 3D trajectory of the moving finger tip is projected into the motion plane, so that the resolving power of the linear gesture patterns is enhanced. We have tested the proposed approach in terms of the accuracy of trace angle and the dimension of the working volume.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.14-26
• /
• 2009

This study presented a novel method to estimate travel times under incident conditions. Predictive travel time information was defined and evaluated with the proposed method. The proposed method utilized individual vehicle speeds obtained from global positioning systems (GPS) and inter-vehicle communications(IVC) for more reliable real-time travel times. Individual vehicle trajectory data were extracted from microscopic traffic simulations using AIMSUN. Market penetration rates (MPR) and IVC ranges were explored with the accuracy of travel times. Relationship among travel time accuracy, IVC ranges, and MPR were further identified using regression analyses. The outcomes of this study would be useful to derive functional requirements associated with traffic information systems under forthcoming ubiquitous transportation environment

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.45-51
• /
• 2016

Existing real-time signal control system was brought up typical problems which are supersaturated condition, point detection system and loop detection system. For that reason, the next generation signal control system of advanced form is required. Following thesis aimed at calculating queue length for the next generation signal control system to utilize basic parameter of signal control in crossing queue instead of the volume of real-time through traffic. Overflow saturated condition which was appeared as limit of existing system was focused to set-up range. Real-time location information of individual vehicle which is collected by GPS data. It converted into the coordinate to apply shock wave model with an linear equation that is extracted by regression model applied by a least square. Through the calculated queue length and link length by contrast, If queue length exceed the link, queue of downstream intersection is included as queue length that upstream queue vehicle is judeged as affecting downstream intersection. In result of operating correlation analysis among link travel time to judge confidence of extracted queue length, Both of links were shown over 0.9 values. It is appeared that both of links are highly correlated. Following research is significant using real-time data to calculate queue length and contributing to signal control system.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.11
• /
• pp.39-46
• /
• 2012

The development of the computer widens the expressive ways for the nature objects and the scenes. The cutting edge computer graphics technologies effectively create any images we can imagine. Although the computer graphics plays an important role in filming and video production, the status of the domestic contents production industry is not favorable for producing and research all at the same time. In digital composition, the match moving stage, which composites the captured real sequence with computer graphics image, goes through many complicating processes. The camera tracking process is the most important issue in this stage. This comprises the estimation of the 3D trajectory and the optical parameter of the real camera. Because the estimating process is based only on the captured sequence, there are many errors which make the process more difficult. In this paper we propose the method for correcting the tracking data. The proposed method can alleviate the unwanted camera shaking and object bouncing effect in the composited scene.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.49-63
• /
• 2019

Crowdedness management at subway platforms is essential to improve services, including the prevention of train delays and ensuring passenger safety. Establishing effective crowdedness mitigation measures for platforms requires accurate estimation of the congestion level. There are temporal and spatial constraints since crowdedness on subway platforms is assessed at certain locations every 1-2 years by hand counting. However, smart cards generate real-time big data 24 hours a day and could be used in estimating congestion. This study proposes a model based on data from transit cards to estimate crowdedness dynamically. Crowdedness was defined as demand, which can be translated into passengers dynamically moving along a subway network. The trajectory of an individual passenger can be identified through this model. Passenger flow that concentrates or disperses at a platform is also calculated every minute. Lastly, the platform congestion level is estimated based on effective waiting areas for each platform structure.