• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2540-2545
• /
• 2003

We propose a new technique to the design and real-time implementation of an adaptive controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot consisting of two 4-d.o.f. robots at the joint space and cartesian space.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.741-746
• /
• 2004

We propose a new technique to the design and real-time implementation of an adaptive controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot consisting of two 4-d.o.f. robots at the joint space and cartesian space.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.40-43
• /
• 1996

An off-line programming, OLP, system is widely used in automation fines. To help an on-line robot system to carry out desirable tasks planned by the off-line simulation, an approach to the real-time communication is presented. The OLP system developed consists of a software, a host computer(PC), a SCARA robot body, four servo drivers, and four independent joint controllers. This study focuses on the software where real-time communication is included. The software, can be used in teaching, trajectory planning, real-time running, and performance evaluation. The evaluation of different control algorithms is one of the merits of the software. The software can give servo commands for task running. A comparison of generated and corresponding actual trajectories provides the evaluation of task performance. The safety, of the OLP system is ensured by alarming malfuntions of the system. The OLP system developed can reduce the teaching time and increase the user's convenience.

• Journal of Korea Multimedia Society
• /
• v.22 no.2
• /
• pp.281-291
• /
• 2019

In order to reflect complex and diverse building types, resident characteristics and disaster factors, it is necessary to introduce a flexible situation-based response system based on real-time information. Intelligent CCTV, hybrid sensor, location scanner, and customized broadcasting device were examined to introduce for the real-time response intelligent response system and its feasibility was verified through field test. In addition, based on the real-time information, the evacuation simulation was executed by assuming the dormitory building and the resident of the school, and the safety of the evacuation and the shortening of the pinnacle time were confirmed. The feasibility of real time information based evacuation comparing with the existing evacuation system were verified in the case of evacuation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.85-88
• /
• 1997

Fieldbus is the real-time communication network for process control and manufacturing automation systems. IEC/ISA fieldbus was proposed as an international standard of fieldbus network. This protocol is operated on the basis of token-passing and scheduling mechanism. In this paper, we analyze the performance characteristics of the 1996 version of IEC/ISA fieldbus systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.40.1-40
• /
• 2001

In this paper, control theoretic approaches are proposed to guarantee QoS (Quality of Series) such as packet delay and packet loss of real-time traffic in high-speed communication network. Characteristics of variable rate real-time traÆc in communication networks are described. The mathematical model describing networks including source and destination nodes are suggested. By a traffic control mechanism, it is shown that worst-case end-to-end transfer delay of traffic can be controlled and packet loss can be prevented. The simulation shows results of delay control and buer level control to raise QoS in realtime traffic.

• International Journal of Quality Innovation
• /
• v.2 no.1
• /
• pp.30-49
• /
• 2001

This paper considers a recent environment in the manufacturing process in which data in large amounts can be obtained on-line in real-time. Under this environment an on-line real-time Statistical Process Control (SPC) scheme equipped with detection of a process change, change-point estimation, and recognition of the change pattern is proposed. The proposed SPC scheme is composed of a Cusum chart, filtering methods and Akaike Information Criterion (AIC). We examine the performance of this scheme by Monte Carlo simulation and show its usefulness.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.5
• /
• pp.108-116
• /
• 1995

A tension control strategy for a multi-span web transport system is proposed. This strategy is developed by using the tension transfer phenomena in multi-span systems. The performance of this control strategy is compared with that of an existing control strategy through a computer simulation. A real-time software is designed based on the proposed tension control stration of master speed drive in tension control is demonstrated.

• Journal of Korea Multimedia Society
• /
• v.15 no.5
• /
• pp.664-671
• /
• 2012

Recently, practice education using virtual medical simulation has been applied to real clinical environment by enhancing the learning efficiency. Specially, in minimally invasive surgery, the necessity of virtual surgery medical simulation has been increased. Realistic bleeding animation, which represents bleeding special effects frequently occurred in virtual medical simulation environment, has not been proposed yet. In this paper, we propose realistic real-time bleeding animation. For bleeding simulation, proposed method calculates main and effective bleeding regions along the main bleeding direction vector to represent naturalistic bleeding effect. In addition, for bleeding rendering, proposed method uses sigmoid function to impose weights of vertex opacities for the smooth opacity change so that the results of bleeding animation is realistic. Proposed method improves the sense of the real and absorption in virtual surgery medical simulation so that the education efficiency of doctors and students using medical simulation can be enhanced.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.10
• /
• pp.479-486
• /
• 2017

Recently, GPGPU has been able to increase the degradation of computer performance, and it is now possible to run physically based real-time simulations on PCs that require high computational complexity. Physical calculations applied in physics simulation can be performed by parallel processing, and can be efficiently performed using parallel computation using Compute shader recently supported by OpenGL 4.3 and Unity 4.0. In this paper, we measure and compare the number of performance in real - time physics simulation in OpenGL running on various platforms and Unity, a content creation tool supporting various platforms. Particle simulation experiments show that particle simulation using Unity performs faster than 136.04%. It is expected that it will be able to select better development tools for future multi - platform support.