• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.12
• /
• pp.638-644
• /
• 2017

Optimal cooling operation algorithm was developed based on a simulation case of a single family house model equipped with renewable energy facility. EnergyPlus simulation results were used as virtual test data. The model contained three energy storage elements: thermal heat capacity of the living room, chilled water storage tank, and battery. Their charging and discharging schedules were optimized so that daily electricity bill became minimal. As an optimization tool, linear programming was considered because it was possible to obtain results in real time. For its adoption, EnergyPlus-based house model had to be linearly approximated. Results of this study revealed that dynamic cooling load of the living room could be approximated by a linear RC model. Scheduling based on the linear programming was then compared to that by a nonlinear optimization algorithm which was made using GenOpt developed by a national lab in USA. They showed quite similar performances. Therefore, linear programming can be a practical solution to optimal operation scheduling if linear dynamic models are tuned to simulate their real equivalents with reasonable accuracy.

• International journal of advanced smart convergence
• /
• v.7 no.2
• /
• pp.86-94
• /
• 2018

This study focuses on presenting the IT program module provided by real - time forecasting and database of the voluntary disclosure quality measure in order to solve the problem of capital cost due to information asymmetry of external investors and corporate executives. This study suggests a model of the algorithm that the quality of real - time voluntary disclosure can be provided to all investors immediately by IT program in order to deliver the meaningful value in the domestic capital market. This is a method of generating and analyzing real-time or non-real-time prediction models by transferring the predicted estimates delivered to the Big Data Log Analysis System through the statistical DB to the statistical forecasting engine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.90-95
• /
• 2003

For the safety driving of an automobile which is become individual requisites, a new Neural Network algorithm which recognized the load vehicles in real time is proposed. The proposed neural network technique is the real time computation method through the inter-node diffusion. In the network, a node corresponds to a state in the quantized input space. Each node is composed of a processing unit and fixed weights from its neighbor nodes as well as its input terminal. The most reliable algorithm derived for real time recognition of vehicles, is a dynamic programming based algorithm based on sequence matching techniques that would process the data as it arrives and could therefore provide continuously updated neighbor information estimates. Through several simulation experiments, real time reconstruction of the nonlinear image information is processed. 1-D LIPN hardware has been composed and various experiments with static and dynamic signals have been implemented.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.9 no.2
• /
• pp.94-98
• /
• 2009

This paper proposes an architecture of a real-time EtherCAT master library called RtEML. The controls EtherCAT slaves under EtherCAT protocol in real-time. It provides a simple programming interface which is useful in developing robot application in C/C++ or C#. To achieve deterministic, hard real-time control in Microsoft Windows environment without additional hardware, INtime is used. Since INtime is designed specifically to take advantage of the powerful capabilities of the x86 processor architecture, the proposed RtEML achieves microseconds of real-time performance.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.36-41
• /
• 2001

This article presents a new acceleration/deceleration method for real-time control of autonomous mobile robots. In this method, a function which produces the table of acceleration/deceleration in real-time is proposed. This function, while sat- isfying the basic concept of mechanics, can choose both various ranges of velocity and distance ranges for the selected velocities. Moreover it can control motors in real time. This function is convenient to be realized by programming. In addi- tion, it is faster than other functions because it can be written by assembly language.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.41-48
• /
• 2019

The Management Discussion and Analysis(MD&A) provides investors with an opportunity to gain insight into the company from a manager's perspective and enables short-term and long-term analysis of the business. And MD&A is an important channel through which companies and investors can communicate, providing a useful source of information for analyzing financialstatements. MD&A is measured by the quality of disclosure and there are many previous studies on the usefulness of disclosure information. Therefore, it is very important for the financial analyst who is the representative information user group in the capital market that MD&A Disclosure Quality is measured in real-time in combination with IT information technology and provided timely to financial analyst. In this study, we propose a method that real-time data is converted to digitalized data by combining MD&A disclosure with IT information technology and provided to financial analyst's information environment in real-time. The real-time information provided by MD&A can help the financial analysts' activities and reduce information asymmetry.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.147-156
• /
• 2011

The purpose of multipurpose reservoir operation in flood season is to reduce the peak flood at a control point by utilizing flood control storage or to minimize flood damage by controlling release and release time. Therefore, the most important thing in reservoir operation for flood season is to determine the optimal release and release time. In this study, goal programming is used for the optimal reservoir operation in flood season. The goal programming minimizes a sum of deviation from the target value using linear programming or nonlinear programming to obtain the optimal alternative for the problem with more than two objectives. To analyze the applicability of goal programming, the historical storm data are utilized. The goal programming is applied to the reservoir system operation as well as single reservoir operation. Chungju reservoir is selected for single reservoir operation and Andong and Imha reservoirs are selected for reservoir system operation. The result of goal programming is compared with that of HEC-5. As a result, it was found that goal programming could maintain the reservoir level within flood control level at the end of a flood season and also maintain flood discharge within a design flood at a control point for each time step. The goal programming operation is different from the real operation in the sense that all inflows are assumed to be given in advance. However, flood at a control point can be reduced by calculating the optimal release and optimal release time using suitable constraints and flood forecasting system.

• Journal of the military operations research society of Korea
• /
• v.28 no.2
• /
• pp.20-33
• /
• 2002

This paper deals with assigning defensive counter air aircraft to the moving target in the air. Recently various kinds of allocation problems have been researched for fixed targets using offensive aircrafts. However, the counter air allocation problems for attacking aircrafts with considering the time and the threat have not been studied much. The main objective of this study is to mininize the time to intercept and the threat values simultaneously by using goal programming. The optimal solution by using an integer goal programming and a branch and bound algorithm is found and analyzed. By applying this model to real situation, we expect to reduce the time and number of sorties for destroying enemy aircraft, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.511-517
• /
• 2015

Determination of the required reserve capacity has an important function in operation of power system and it is calculated based on the largest loss of supply. However, conventional method cannot be applied in future power system, because potential grid-connected distributed generator and abnormal temperature cause the large load imbalance. Therefore this paper address new framework for determining the optimal required reserve capacity taking into account the real time load imbalance. At first, we introduce the way of operating reserve resources which are the secondary, tertiary, Direct Load Control (DLC) and Load shedding reserves to make up the load imbalance. Then, the formulated problem can be solved by the Probabilistic Dynamic Programming (PDP) method. In case study, we divide two cases for comparing the cost function between the conventional method and the proposed method.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.71-79
• /
• 2014

This paper discusses a method for the determination of frequency control reserve requirement with consideration of the interaction between ex-ante planning and real-time balancing. In proposed method, we consider the fact that the delivered energy for tertiary control reserve is determined based on required capacity for secondary control reserve and the expected amount of load errors. Uncertain load errors are derived by Brownian motion, an optimization method is suggested using a stochastic programming. In a short, we propose an interactive dependent method for determining secondary control reserve requirement based on the principle that it satisfies to minimize the total cost. As a result, this paper provides will analyze for an example model to demonstrate the capabilities of the method.