• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.828-831
• /
• 1997

One of the most important design factor for the image tracker is the speed of the data processing which allows real-time operation of the system and provides reasonably accurate performance at the same time. Use of powerful DSP alone does not guarantee to meet such requirement. In this paper, a simple efficient algorithm for real-time multi-target image tracking is suggested. The suggested method is based on a recursive centroiding technique and color table look-up. This method has been successfully implemented in a image processing system for Micro-Robot Soccer Tournament(MIROSOT). This tracker can track positions of a ball, 3 enemies, and 3 agents at the same time. The experimental results show that the processing time for each frame of image is less than 7ms, which is well within the 60Hz sampling interval for real-time operation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.10
• /
• pp.1518-1527
• /
• 1989

We proposed a technique to design a multimicrocomputer system for real-time parallel processing with an interconnection network which has good network latency time. In order to simplify the performance evaluation and the design procedure under the hard real-time constraints we defined network latency time which takes into account the queueing delays of the networks. We designed a dynamic interconnection network following the proposed technique, and the simulation results show that we can easily estimate the multimicrocomputer system's approximate performance using the defined network latency time before the actual design, so this definition can help the efficient design of the real-time parallel processing systems.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.11
• /
• pp.804-815
• /
• 1988

Real-time image processing algorithms to detect position and orientation of rectangular type electronic components are developed. The position detection algorithm is implemented with the use of projection method which is insensitive to noise. Also dynamic thresholding method of projection is employed in order to distinguish between the boundary of a component and any marking on the component. The orientation is determined by Hough transform of boundary candidates of a component, which is obtained a priori by a simple edge detection method. For real-time processing of both position and orientation for a component which is not aligned well, parallel processing method of image data is proposed and tested in real-time.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.171-171
• /
• 2000

We have developed m innovative surface inspection system for automated quality control for steel products in POSCO. We had ever installed the various kinds of surface inspection systems, such as a linear CCD and a laser typed surface inspection systems at cold rolled strips production lines. But, these systems cannot fulfill the sufficient detection and classification rate, and real time processing performance. In order to increase detection and classification rate, we have used the Dark, Bright and Transition Field illumination and area type CCD camera, and fur the real time image processing, parallel computing has been used. In this paper, we introduced the automatic surface inspection system and real time image processing technique using the Object Detection, Defect Detection, Classification algorithms and its performance obtained at the production line.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.226-231
• /
• 2022

The concept of information entropy has been widely applied in various fields. Recently, in the field of image processing, many technologies applying the concept of information entropy have been developed. As the importance and demand of computer vision technologies increase in modern industry, real-time processing must be possible in order for image processing technologies to be efficiently applied to modern industries. Extracting the entropy value of an image is difficult to process in real-time due to the complexity of computation in software, and a hardware structure of an image entropy filter capable of real-time processing has never been proposed. In this paper, we propose for the first time a hardware structure of a histogram-based entropy filter that can be processed in real time using a barrel shifter. The proposed hardware was designed using Verilog HDL, and Xilinx's xczu7ev-2ffvc1156 was set as the target device and FPGA was implemented. As a result of logic synthesis using the Xilinx Vivado program, it has a maximum operating frequency of 750.751 MHz in a 4K UHD high-resolution environment, and it processes more than 30 images per second and satisfies the real-time processing standard.

• Journal of Information Processing Systems
• /
• v.15 no.6
• /
• pp.1462-1471
• /
• 2019

Real-time embedded systems have become pervasive in general industry. They also began to be applied in such domains as avionics, automotive, aerospace, healthcare, and industrial Internet. However, the system failure of such domains could result in catastrophic consequences. Runtime software testing is required in such domains that demands very high accuracy. Traditional runtime software testing based on handwork is very inefficient and time consuming. Hence, test automation methodologies in runtime is demanding. In this paper, we introduce a software testing system that translates a real-time software into a monitorable real-time software. The monitorable real-time software means the software provides the monitoring information in runtime. The monitoring target are time constraints of the input real-time software. We anticipate that our system lessens the burden of runtime software testing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.150-150
• /
• 2018

The Numerical Weather Prediction (NWP) models provide information for weather forecasts. The highly nonlinear and complex interactions in the atmosphere are simplified in meteorological models through approximations and parameterization. Therefore, the simplifications may lead to biases and errors in model results. Although the models have improved over time, the biased outputs of these models are still a matter of concern in meteorological and hydrological studies. Thus, bias removal is an essential step prior to using outputs of atmospheric models. The main idea of statistical bias correction methods is to develop a statistical relationship between modeled and observed variables over the same historical period. The Model Output Statistics (MOS) would be desirable to better match the real time forecast data with observation records. Statistical post-processing methods relate model outputs to the observed values at the sites of interest. In this study three methods are used to remove the possible biases of the real-time outputs of the Weather Research and Forecast (WRF) model in Imjin basin (North and South Korea). The post-processing techniques include the Linear Regression (LR), Linear Scaling (LS) and Power Scaling (PS) methods. The MOS techniques used in this study include three main steps: preprocessing of the historical data in training set, development of the equations, and application of the equations for the validation set. The expected results show the accuracy improvement of the real-time forecast data before and after bias correction. The comparison of the different methods will clarify the best method for the purpose of the forecast skill enhancement in a real-time case study.

• Computers and Concrete
• /
• v.23 no.6
• /
• pp.445-457
• /
• 2019

Cracks are an important distress of concrete bridges, and may reduce the life and safety of bridges. However, the traditional manual crack detection means highly depend on the experience of inspectors. Furthermore, it is time-consuming, expensive, and often unsafe when inaccessible position of bridge is to be assessed, such as viaduct pier. To solve this question, the real-time automatic crack detecting system with unmanned aerial vehicle (UAV) become a choice. This paper designs a new automatic detection system based on real-time comprehensive image processing for bridge crack. It has small size, light weight, low power consumption and can be carried on a small UAV for real-time data acquisition and processing. The real-time comprehensive image processing algorithm used in this detection system combines the advantage of connected domain area, shape extremum, morphology and support vector data description (SVDD). The performance and validity of the proposed algorithm and system are verified. Compared with other detection method, the proposed system can effectively detect cracks with high detection accuracy and high speed. The designed system in this paper is suitable for practical engineering applications.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.3E
• /
• pp.13-18
• /
• 1996

A real-time identifier for the nonstationary time-varying signals and systems was implemented using a low cost DSP (digital signal processing) chip. The identifier is comprised of I/O units, a central processing unit, a control unit and its supporting software. In order t estimate the system accurately and to reduce quantization error during arithmetic operation, the firmware was programmed with 64-bit extended precision arithmetic. The performance of the identifier was verified by comparing with the simulation results. The implemented real-time identifier has negligible quantization errors and its real-time processing capability crresponds to 0.6kHz for the nonstationary AR (autoregressive) model with n=4 and m=1.

• The KIPS Transactions:PartB
• /
• v.18B no.4
• /
• pp.173-180
• /
• 2011

This paper shows an approach for real-time object segmentation on GPU (Graphics Processing Unit) using CUDA (Compute Unified Device Architecture). Recently, many applications that is monitoring system, motion analysis, object tracking or etc require real-time processing. It is not suitable for object segmentation to procedure real-time in CPU. NVIDIA provide CUDA platform for Parallel Processing for General Computation to upgrade limit of Hardware Graphic. In this paper, we use adaptive Gaussian Mixture Background Modeling in the step of object extraction and CCL(Connected Component Labeling) for classification. The speed of GPU and CPU is compared and evaluated with implementation in Core2 Quad processor with 2.4GHz.The GPU version achieved a speedup of 3x-4x over the CPU version.