• Reproductive and Developmental Biology
• /
• v.30 no.2
• /
• pp.125-133
• /
• 2006

This study was conducted to detect the apoptosis incidence in blastocysts and to compare the abundance of Bax, Bcl2L1, VEGF and FGFR2 in in vitro fertilized (IVF), parthenogenetic (PAT) and nuclear transfer (NT) embryos. Oocytes matured for 40 hr were enucleated and reconstructed with confluenced fetal fibroblasts (FFs) derived from a ${\sim}45$ day fetus. Reconstructed eggs were then fused with 2 DC pulses (2.0 kV/cm, $30{\mu}sec$) and cultured with $7.5{\mu}g/ml$ cytochalasin B for 3 hr. Parthenotes (PAT) were produced with the same electric strength and culture for NT eggs. The embryos were cultured in NCSU-23 medium at $39^{\circ}C,\;5%\;CO_2,\;5%\l;O_2$ in air. In 3 runs, set of 10 embryos at the 4-cell to blastocyst stages were used to extract total RNA for analyzing the gene expression patterns of pro-apoptotic (Bax), anti-apoptotic (Bcl2L1), vasculogenesis (VEGF), implantation (FGFR2III) using real-time quantitative PCR. Cleavage and blastocyst rates were significantly higher (P<0.05) in IVF and PAT ($79.3{\pm}8.5\;and\;25.5{\pm}6.1,\;and\;85.0{\pm}6.4\;and\;38.6{\pm}5.5$, respectively)than NT counterparts ($65.1{\pm}5.2\;and\;15.6{\pm}3.0$, respectively). Significantly higher (P<0.05) total cells were observed in IVF controls and PAT ($34.7{\pm}5.8\;and\;38.1{\pm}4.1$) than NT embryos ($24.8{\pm}3.2$). Apoptosis index was significantly lower (P<0.05) in IVF than NT embryos. The Relative abundances (RA) of Bax and VEGF were significantly higher (P<0.05) at blastocyst stage in NT than IVF control. The RA of Bcl2L1 and FGFR2III were significantly higher (P<0.05) at blastocyst stage in IVF than NT. The present study observed the abnormal gene expressions in NT embryos at various developmental stages, suggesting certain clues to find out the cause of the low efficiency of NT to term.

• Journal of the Korean Society of Radiology
• /
• v.9 no.7
• /
• pp.425-431
• /
• 2015

Measurement accuracy was evaluated for the respiratory air flow transducer developed for applications under emergent situations. Pressure-Flow calibration equation was obtained by acquisition of air flow signals from the transducer in response to 6 flow waveforms, similar to those of artificial ventilation, generated by the standard flow generator system. Tidal volume and maximal flow rate were calculated on the flow signal then compared with the error-free data obtained by the linear displacement transducer of the flow generator system. Mean relative error of the tidal volume was within 3% and that of the maximal flow rate, approximately 5%, demonstrating accurate enough measurements. Therefore, the transducer could be applied to emergent situations to monitor the respiratory air flow signal as well as diagnostic parameters in real time.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.608-615
• /
• 2000

A determination method of trace nickel and cobalt in water samples was studied and developed by adsorbing their complexes on ion exchange resin suspension. The analytical ions were formed as complexes with a ligand of APDC (ammonium pyrrolidinedithiocarbamate) and adsorbed on anion exchange resin of Dowex 2-X8. After the suspension was filtered out with membrane filter, the complexes were dissolved in HCl solution by an ultrasonic vibrator for ET-AAS determination. Several conditions were optimized as followings. pH of sample solution: 5.0, amount of ligand APDC: more than 430 times in mole ratio, the type and concentration of acid: 0.1 M HCl, and vibration time: 7 minutes. The addition of palladium in the HCl solution could improve the reproducibility and sensitivity by a matrix modification in the absorbance measurement. This procedure was applied for the analysis of three kinds of real water samples. The detection limits equivalent to 3 times standard deviation of blank were Co 0.36 ng/mL and Ni 0.27 ng/mL and recoveries in spiked samples were 99-102% for cobalt and 100-105% for nickel.

• The Journal of Korean Medicine
• /
• v.37 no.2
• /
• pp.12-22
• /
• 2016

Objectives: The aim of this study was to confirm the dose-dependent skin moisturizing effects of dried pomegranate concentrate powder (PCP) and pomegranate concentrate solution (PCS) in ICR mice. Materials and methods: To observe the in vivo skin moisturizing effects and possible underlying mechanisms of PCP and PCS, oral PCP (100, 200, and 400 mg/kg) and PCS (1, 2, and 4 mL/kg) were administered to normal ICR mice. Changes in body weight, skin water content, and skin type I collagen and hyaluronan contents were measured. Additionally, the mRNA expression levels of hyaluronan synthase (Has) 1, 2, and 3, and collagen type I alpha (COL1A) 1 and 2 were determined in the dorsal skin of mice by real-time reverse transcription polymerase chain reaction (RT-PCR). Results: Significant and dose-dependent increases in dorsal skin water content and type I collagen and hyaluronan contents were seen in PCP and PCS-treated mice. Moreover, the mRNA levels of Has 1, 2, and 3, involved in hyaluronan synthesis, and of COL1A1 and COL1A2, involved in collagen synthesis, were significantly and dose-dependently upregulated in PCS- and PCP-treated mice. Conclusions: In this study, PCP and PCS led to favorable skin moisturizing effects as indicated by increased skin water content and the upregulation of hyaluronan and collagen synthesis enzymes in mice treated with PCS (4 mL/kg) and PCP (200 mg/kg).

• Journal of Ginseng Research
• /
• v.44 no.1
• /
• pp.58-66
• /
• 2020

Background: The biological and pharmacological effects of BST204, a fermented ginseng extract, have been reported in various disease conditions. However, its molecular action in metabolic disease remains poorly understood. In this study, we identified the antiadipogenic activity of BST204 resulting from its inhibition of the S6 kinase 1 (S6K1) signaling pathway. Methods: The inhibitory effects of BST204 on S6K1 signaling were investigated by immunoblot, nuclear fractionation, immunoprecipitation analyses. The antiadipogenic effect of BST204 was evaluated by measuring mRNA levels of adipogenic genes and by chromatin immunoprecipitation and quantitative real-time polymerase chain reaction analysis. Results: Treatment with BST204 inhibited activation and nuclear translocation of S6K1, further decreasing the interaction between S6K1 and histone H2B in 10T1/2 mesenchymal stem cells. Subsequently, phosphorylation of H2B at serine 36 (H2BS36p) by S6K1 was reduced by BST204, inducing an increase in the mRNA expression of Wnt6, Wnt10a, and Wnt10b, which disturbed adipogenic differentiation and promoted myogenic and early osteogenic gene expression. Consistently, BST204 treatment during adipogenic commitment suppressed the expression of adipogenic marker genes and lipid drop formation. Conclusion: Our results indicate that BST204 blocks adipogenesis of mesenchymal stem cells through the inhibition of S6K1-mediated histone phosphorylation. This study suggests the potential therapeutic strategy using BST204 to combat obesity and musculoskeletal diseases.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.3
• /
• pp.85-96
• /
• 2023

This study developed and evaluated a safe route guidance service for electric personal assistive mobility device used mainly by the mobility impaired people to improve their mobility. Thirteen underlying factors affecting the mobility of electric personal assistive mobility device have been derived through a survey with the mobility impaired people and employees in related organizations in Busan Metropolitan City. After assigning safety scores to individual factors and identifying the relevant factors along routes of interest with an object detection AI model, the safe route for electric personal assistive mobility device was provided through an optimal path-finding algorithm. As a result of comparing the general route of T-map and the recommended route of this study for the identical routes, the latter had relatively fewer obstacles and the gentler slope than the former, implicating that the recommended route is safer than the general one. As future works, it is necessary to enhance the function of a route guidance service based on the real-time location of users and to conduct spot investigations to evaluate and verify its social acceptability.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.277-284
• /
• 2013

The analysis of phase synchronization characteristics from EEG signals is important for the understanding of information processing functionality in the brain network. In this paper, wavelet transformation(WT), Hilbert tansformation (HT), complex demodulation (CD) methods having time localization characteristics were applied to real evoked potential data and noise added simulation data with center frequencies corresponding to EEG bands for the estimation performance analysis of phase offset, phase changing point, and interband crosstalk. The WT is the best both in ${\delta}$, ${\theta}$, and ${\alpha}$ band signal decomposition, and in analyzing phase synchronization performance. The CD can be efficiently used in changing point detection under tolerant noise condition because of its abrupt performance degradation over noise endurance level. From experimental observations, the WT is the most suitable in phase synchronization application of EEG signal, and the CD can be affordable in restricted application such as changing point detection for higher bands than ${\delta}$. Particularly, WT and CD can be used to detect the changing instant of brain function by indirectly estimating the phase changing point.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.283-291
• /
• 2011

As the construction industry has recently been transformed by the emergence of ubiquitous and intelligent technology, there have been major changes in the management methods employed. Specifically, next-generation construction management systems have been developed that collect and analyze many pieces of information in real time by using various wireless sensors and networks. The purpose of this study is to understand the current status of Ubiquitous Sensor Networks (USN) in the construction sector, and to gain fundamental data for a system of measuring concrete curing temperature in a construction site that employs a USN. By investigating the application status of USN, it was confirmed that USN has mainly been applied to the maintenance of facilities, safety management, and quality control. In addition, a field experiment in which the curing temperature of concrete was measured using a USN was carried out to evaluate two systems with wireless sensor networks, and the applicability of these systems on site was confirmed. However, it is estimated that the embedded wireless sensor type is affected by metal equipment on site, internal battery of sensor and concrete depth, and studies to provide more stable system by USN are thus required.

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.481-489
• /
• 2014

In this paper, the automatic standby power blocking socket outlet to reduce standby power by blocking power threshold is implemented. Where, the standby power means a flowing power when a disused power electronic is plugged into the socket outlet. The proposed socket outlet can cut off the standby power by establishing a proper block power threshold electronic device according to each electronic device because it can monitor the amount of power through the smart machines such as the real-time PC or mobile phone and directly control the blocking power threshold. The software is implemented by using Visual Studio software, code vision and SN8 C studio, and the hardware is embodied in ATmega128, SN8F27E93S, USB to UART, and relay etc. Through the simulation, we find that the standby power of the proposed method is similar to that of the conventional method in case of the cellular phone but the standby power of the proposed method is much less than that of the conventional method in case of the computer, air conditioning, and set-top box. Therefore, it is proved that the proposed socket outlet has a superior performance in terms of the standby power.

• Journal of Ginseng Research
• /
• v.45 no.6
• /
• pp.665-675
• /
• 2021

Background: Ginsenoside Rg1 (Rg1), an active ingredient in ginseng, may be a potential agent for the treatment of Alzheimer's disease (AD). However, the protective effect of Rg1 on neurodegeneration in AD and its mechanism of action are still incompletely understood. Methods: Wild type (WT) and APP/PS1 AD mice, from 6 to 9 months old, were used in the experiment. The open field test (OFT) and Morris water maze (MWM) were used to detect behavioral changes. Neuronal damage was assessed by hematoxylin and eosin (H&E) and Nissl staining. Immunofluorescence, western blotting, and quantitative real-time polymerase chain reaction (q-PCR) were used to examine postsynaptic density 95 (PSD95) expression, amyloid beta (Aβ) deposition, Tau and phosphorylated Tau (p-Tau) expression, reactive oxygen species (ROS) production, and NAPDH oxidase 2 (NOX2) expression. Results: Rg1 treatment for 12 weeks significantly ameliorated cognitive impairments and neuronal damage and decreased the p-Tau level, amyloid precursor protein (APP) expression, and Aβ generation in APP/PS1 mice. Meanwhile, Rg1 treatment significantly decreased the ROS level and NOX2 expression in the hippocampus and cortex of APP/PS1 mice. Conclusions: Rg1 alleviates cognitive impairments, neuronal damage, and reduce Aβ deposition by inhibiting NOX2 activation in APP/PS1 mice.