• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.110-122
• /
• 2005

Bluetooth has been reputed as a wireless networking technology supplying ad-hoc networks between digital devices. In particular, bluetooth scatternet is a most essential part for dynamic ad-hoc networks. But past researches on bluetooth scatternet has hardly treated dynamic scatternet environment. In this paper, we proposed a scatternet reformation algorithm for the case that some nodes escape from the scatternet. The proposed algorithm is a general algorithm which can be applied to many types of bluetooth scatternet regardless of the topology. The proposed algorithm has short reformation time delay because the process has only page process (not including inquiry process ). The algorithm is operated based on Recovery Node Vector which is composed of Recovery Master and Recovery Slave. In this paper, we performed the real hardware experiments for evaluating the performance of the proposed algorithm. In that experiments, we measured the reformation time and reformation probability. In comparison with the case including inquiry process, the proposed algorithm had the improvement in reformation time delay and we obtained high success rate over 97%.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3242-3245
• /
• 1999

The current educational software usually has limitations of accessing and mutual communication. Networking Technology can overcome these limitations. Using Internet, students can access the educational resources easily and learning process can be monitored. In this study a virtual experiment program is developed for students to practice the basic electronic experiment, which is a fundamental subject in electronic department curriculum. Students can understand the basic theory and rules easily by simulated experimental process. Almost the same result is obtained as in real experiment because this program is made to simulate the real experiment. The virtual experiment site can be accessed easily by Internet and an experiment is performed based on individual basis without restriction of location and time. This program can be used as fully the real experiment substitution or supplementary educational materials. In both case, it provides many benefits in education.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.799-806
• /
• 2004

A growing diversity of pervasive devices is gaming access to the Internet and other information. However, much of the rich multimedia contents cannot be easily handled by the client devices because of the limited communication, processing, storage and display capabilities. The in-tegration of voice, data and video service modified the target of networking technologies. Networks must have some the capabilities for in-tegration of various services and also for QoS support as required by each of those service. Because of these reasons, we developed EAGIS(Efficient ATM Gateway for real time Internet Service) to provide seamless multimedia service between the ATM network and the Internet. EAGIS consists of the interworking unit, content server, transcoding server, and the serveice broker to provide seamless multimedia service be-tween the ATM network and the Internet. In this paper, we design the architecture and transcoding service scenario of the EAGIS. When the RTP is used for the bi-directional communication, transcoding time is configured by the time-stamp of RTCP. When HTTP is used for unidirec-tional communication, self-timer is used. By using these reference time, standard transcoding method is applicable according to the frame trans-mission rate and network traffic load. And we can also assure the QoS of the multiple users` effective bandwidth by our algorithm.

• Journal of the HCI Society of Korea
• /
• v.5 no.2
• /
• pp.7-14
• /
• 2010

Urban Data collected through Sensor Network is becoming crucial to understand and analyse a city. Thus, the Ubiquitous Sensor Network builds the foundation of the u-City development. This research aims to develop an energy monitoring application with an intuitive visualization environment which integrates energy usage information on top of urban geospatial information. Such a system will be able to facilitate effective energy supply plan at the early stages of urban planning, and eventually to encourage citizens to conserve energy by giving them real time monitoring information in an easy to understand visual environment. The system provides multiple layers of energy-related information coupled with the geospatial information layer in order to accommodate multiple viewpoints. On the other hand, the system provides logical Level of Detail control based on urban spatial information hierarchy. We defined the system concept and functions, and designed the data structure and the methods of information visualization. This paper presents the visualization methods, data structure, interactions scenarios which combines spacial information, E-GIS data and the energy related sensor data. Furthermore this research tries to introduce the concept of Social Sensor Networking to enhance the monitoring quality.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.29-38
• /
• 2019

With the advancement of information and communication technology, tactical networks are continuously being converted to All-IP future tactical networks that integrate all application services based on Internet protocol. Futuristic tactical mesh network is built with tactical WAN (wide area network) nodes that are inter-connected by a mesh structure. In order to guarantee QoS (quality of service) of application services, tactical service mesh (TSM) is suggested as an intermediate layer between infrastructure and application layers for futuristic tactical mesh network. The tactical service mesh requires dynamic QoS monitoring and control for intelligent QoS coordination. However, legacy networking nodes used for existing tactical networks are difficult to support these functionality due to inflexible monitoring support. In order to resolve such matter, we propose a tactical mesh WAN node as a hardware/software co-designed networking node in this paper. The tactical mesh WAN node is conceptually designed to have multi-access networking interfaces and virtualized networking switches by leveraging the DANOS whitebox server/switch. In addition, we explain how to apply eBPF-based traffic monitoring to the tactical mesh WAN node and verify the traffic monitoring feasibility for supporting QoS coordination of tactical-mesh traffic.

• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.347-354
• /
• 2001

This paper proposes and analyzes an error control scheme which tries to recover the transmission error within the deadline of a message on FDDI networks. The error control procedure does not interfere other normal message transmissions by delivering retransmission request via asynchronous traffic as well as by delivering retarnsmitted message via overallocated bandwidth which is inevitably produced by the bandwidth allocation scheme for hard real-time guarantee. The receiver counts the number of tokens which it meets, determines the completion of message transmission, and finally sends error report. The analysis results along with simulation performed via SMPL show that the proposed scheme is able to enhance the deadline meet ratio of messages by overcoming the network errors. Using the proposed error control scheme, the hard real-time network can be built at cost lower than, but performacne comparable to the dual link network.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.137-144
• /
• 2007

Advances in networking technology digital media, and codecs have made it possible for the Internet evolves into a Broadband convergence Network (BcN) and provides various services including Voice over Internet Protocol (VoIP) and IPTV over their high-speed IP networks. In order for the Internet to make a profit as traditional Public Switched Telephone Network (PSTN), it must provide high qualify VoIP services. Therefore, real time qualify measurement framework is the most important requisite to provide VoIP service. For this, IETF (Internet Engineering Task Force) defined RTCP-Extended Reports (RTCP-XR) that extend RTCP (Real-Time Transport Protocol Control Protocol). However, procedure and method tot actually VoIP qualify measurement did not recommended nothing but defined item to measure voice quality. Our objective in this paper is to describes a practical measuring framework for end-to-end QoS of switched voice packet in an IP environment. It includes concepts as well as step-by-step procedures for measuring packetized voice streams. It also proposes new formats that extend RTCP-XR's concept.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.617-624
• /
• 2008

In general, RTK-GPS(Real Time Kinematic GPS) based on the single reference station is able to determinate the high accurate position of rover on the spot using error correction information of transmitted carrier phase from the base station via wireless modem. However, single reference station method has some weak points to decrease positioning accuracy because it must be obtained carrier phase from the each satellite continuously, allowed to transmit without obstacle and limited to short base line distance between base and rover station. This paper aims to attempt network based GPS carrier phase differential positioning using three multi reference stations to overcome the method of single reference station and RTK network is realized by real time monitoring program with Visual C++. The optimum error correction value of three multi reference stations by RTK networking is selected automatically to correct the position of rover station. In this paper, this algorithm is applied to determine sea water level using GPS buoy, and the accuracy results of water level change were analyzed and compared with each other using single and multi reference stations.

• Journal of KIISE:Information Networking
• /
• v.37 no.6
• /
• pp.483-488
• /
• 2010

Due to the prevalence of various mobile devices and wireless broadband networks, there has been a significant increase in interest and demand for multimedia streaming services. Moreover, the user can service the participatory video broadcasting service in the mobile device and it can be used to deliver the real-time news and more variety information in the user side. Live multimedia service of user participation should consider not only the video quality but also the delay bounds and continuity of video playback for improving the user perceived QoS (Quality of Service) of streaming service. In this paper, we propose an adaptive rate control scheme, called DeBuG (Delay Bounds Guaranteed), to guarantee the delay bounds and continuity of video playback for the real-time streaming in mobile devices. In order to provide those, the proposed scheme has a quality adaptation function based on the transmission buffer status and network status awareness. It also has a selective frame dropper, which is based on the media priority, before the transmission video frames. The simulation results demonstrate the effectiveness of our proposed scheme.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.307-318
• /
• 2003

In this paper, we design and construct a TMO object group that provides the guaranteed real-time services in the distributed object computing environments, and verify execution power of its model for the correct distributed real-time services. The TMO object group we suggested is based on TINA's object group concept. This model consists of TMO objects having real-time properties and some components that support the object management service and the real-time scheduling service in the TMO object group. Also TMO objects can be duplicated or non-duplicated on distributed systems. Our model can execute the guaranteed distributed real-time service on COTS middlewares without restricting the specially ORB or the of operating system. For achieving goals of our model. we defined the concepts of the TMO object and the structure of the TMO object group. Also we designed and implemented the functions and interactions of components in the object group. The TMO object group includes the Dynamic Binder object and the Scheduler object for supporting the object management service and the real-time scheduling service, respectively The Dynamic Binder object supports the dynamic binding service that selects the appropriate one out of the duplicated TMO objects for the clients'request. And the Scheduler object supports the real-time scheduling service that determines the priority of tasks executed by an arbitrary TMO object for the clients'service requests. And then, in order to verify the executions of our model, we implemented the Dynamic Binder object and the Scheduler object adopting the binding priority algorithm for the dynamic binding service and the EDF algorithm for the real-time scheduling service from extending the existing known algorithms. Finally, from the numerical analyzed results we are shown, we verified whether our TMO object group model could support dynamic binding service for duplicated or non-duplicated TMO objects, also real-time scheduling service for an arbitrary TMO object requested from clients.