• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1666-1668
• /
• 2004

By wireless transmission data, there is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error check algorithm in order to decrease the data's distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error check algorithm for error check of transmission data. This study is also that investigation and search for error check algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro process in the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which can get permission to use by Frequency Law made by Korean government

• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.18-27
• /
• 2013

Real-time monitoring is one of the prime necessities in a weapon flight test that is required for the efficient and timely collection of large amounts of high-rate sampled data acquired by an event-trigger. The wireless sensor network is a good candidate to resolve this requirement, especially considering the inhospitable environment of a weapon flight test. In this paper, we propose a priority based multi-channel MAC protocol with CSMA/CA over a single radio for a real-time monitoring of a weapon flight test. Multi-channel transmissions of nodes can improve the network performance in wireless sensor networks. Our proposed MAC protocol has two operation modes: Normal mode and Priority Mode. In the normal mode, the node exploits the normal CSMA/CA mechanism. In the priority mode, the node has one of three grades - Class A, B, and C. The node uses a different CSMA/CA mechanism according to its grade that is determined by a signal level. High grade nodes can exploit more channels and lower backoff exponents than low ones, which allow high grade nodes to obtain more transmission opportunities. In addition, it can guarantee successful transmission of important data generated by high grade nodes. Simulation results show that the proposed MAC exhibits excellent performance in an event-triggered real-time application.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.6
• /
• pp.311-318
• /
• 2013

In this paper, we consider a new packet scheduling algorithm for real-time traffic in the HSDPA system that has been introduced for the WCDMA system, in order to provide high transmission rates. The objective of the design is to meet the maximum tolerable delay and consider channel assignment based on the received SIR for real-time traffic users. The proposed scheduling algorithm shows that the users are ranked by the ratios of the bits in the buffer to the residual time for transmission as priority order; then the ranked users are assigned certain number of channels based on the SIR value table. The simulation results show that the proposed algorithm can provide a lower packet drop rate, and satisfy real time quality of service (QoS) requirements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.923-929
• /
• 2021

TCP communication and packet communication require transmission control technology to ensure high quality and high reliability. However, in the case of real-time data transmission, an inefficient transmission problem occurs. In order to overcome this problem and transmit the packet reliability, in general, early congestion control using the buffer level as an index was used. Control of the congestion control point and the cancellation point is delayed because the point at which congestion is controlled is based on the buffer level. Therefore, in this paper, not only the buffer level indicator, but also the ideal buffer level, which determines the packet discard probability, is classified so that the transmission rate and buffer level that measure network congestion are close to the level above the optimal setting. As a result, it was shown that the average buffer level can be directly controlled by maintaining the average buffer level by the ideal buffer level set in the experiment to prove the proposed method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.421-429
• /
• 2018

While IoT device sensing data or financial transaction data is transmitted in real time, huge data traffic is generated in processing it. This huge data can be effectively compressed or transmitted using universal code, which is a real-time lossless compressor. In this paper, we propose our BL-beta code, which is newly developed universal code for compressing stock trading data, which the maximum range of measured values is difficult to predict and is generated within a relatively constant range over a very short period of time. For compressing real-time stock trading data, Compared with the fixed length bit transmission, the compression efficiency is at least 49.5% higher than that of the fixed length bit transmission, and the compression transmission performance is 16.6% better than the Exponential Golomb code.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.11-16
• /
• 1998

Condition monitoring technique used in the military is JOAP, for which the spectroscopic analysis is applied. However it is known that the technique has some problems in economical and practical point of view. This study introduces a new technique for measuring wear in real time base and applies the technique to a high power semi-automatic transmission. The results show the feasibility by measuring the concentration of ferrous wear particles from the transmission oil.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2213-2231
• /
• 2013

Compressed sensing is a novel technology used in the field of wireless communication and sensor networks for channel estimation, signal detection, data gathering, network monitoring, and other applications. It plays a significant role in highly secure, real-time, well organized, and cost-effective data communication in smart-grid (SG) systems, which consist of multi-tier network standards that make it challenging to synchronize in power management communication. In this paper, we present a multi-layer communication model for SG systems and propose compressed-sensing based data transmission at every layer of the SG system to improve data transmission performance. Our approach is to utilize the compressed-sensing procedure at every layer in a controlled manner. Simulation results demonstrate that the proposed monitoring devices need less transmission power than conventional systems. Additionally, secure, reliable, and real-time data transmission is possible with the compressed-sensing technique.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.4
• /
• pp.305-312
• /
• 2014

This paper discusses real-time peak shaving algorithms for a large-scale battery energy storage system (BESS). Although several transmission and distribution functions could be implemented for diverse purposes in BESS applications, this paper focuses on a real-time peak shaving algorithm for an energy time shift, considering wind power generation. In a high wind penetration environment, the effective load levels obtained by subtracting the wind generation from the load time series at each long-term cycle time unit are needed for efficient peak shaving. However, errors can exist in the forecast load and wind generation levels, and the real-time peak shaving operation might require a method for wind generation that includes comparatively large forecasting errors. To effectively deal with the errors of wind generation forecasting, this paper proposes a real-time peak shaving algorithm for threshold value-based peak shaving that considers fuzzy wind power generation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1229-1234
• /
• 2012

In this paper, we analyze the problems that the DDS middleware, which is a standard data-centric communication interface, uses the fixed packet transmission method by the pre-defined protocol for exchanging data packets. The packet transmission method selected in a fixed manner cannot handle appropriately the increasing of resource overhead in an environment where the load of the DDS network changes dynamically. If the load on the node and network exceeds the threshold, the performance of the packet transmission may be degraded rapidly. This results in a failure of ensuring the real-time characteristic of DDS middleware. To solve this problem, we propose the scheme of the adaptive packet transmission for adjusting the transmission method in real-time based on the overhead on the DDS network.

• Journal of Korea Multimedia Society
• /
• v.21 no.3
• /
• pp.415-422
• /
• 2018

Advances of telecommunication technology bring various changes in journalism field. Reporters started to gather, edit, and transmit content to main server in media company using hand-held smart media and notebook computer. This paper tried to testify valid bit-rate of visual news content using LTE network and mobile phone. Field news like natural disasters need real-time transmission of video content. But broadcasting company normally use heavy ENG system and transmission satellite trucks. We prepared and experimented different types of visual content that has different bit-rates. Transmission tool was LU-60HD mobile system of LiveU Corporation. Transmission result shows that bit-rate of 2Mbps news content is not suitable for broadcasting and VBR (Variable Bit Rate) transmission has better definition quality than CBR (Constant Bit Rate) method. Three different bit-rate of VBR transmission result shows that 5Mbps clip has better quality than 1Mbps and 3Mbps. The higher bit-rate, the better video quality. But if the content has much movements, that cause delay and abnormal quality of video. So optimizing the balance between stability of signal and quality of bit-rate is crucial factor of real-time broadcasting news gathering business.