• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1375-1382
• /
• 2009

The objective of this paper is to apply the load ratio method to the measurement of the crack length of the real scale pipe specimen. The load ratio method was modified and finite element analyses were performed to derive the relationship between the normalized compliance and the normalized crack length for the pipe specimen. In order to measure the crack length, the direct current potential drop method and the modified load ratio method were applied to the pipe test. The applicability of the modified load ratio method was confirmed by comparing the calculated crack length with the measured crack length from the pipe experiment.

• 설비공학논문집
• /
• 제11권3호
• /
• pp.281-291
• /
• 1999

A computer code based on a node equation method has been developed for the analysis of pipe network. Both data structure and object-oriented programming technique are used for pipe and node modelling, in which simplification process is applied to complicated and large pipe network. The semi-direct solver, ILU-CGS, improves greatly both the accuracy and the rate of convergence. The computational result of high-pressure pipe network of city gas in Taegu shows the good agreement with the real data.

• 한국소음진동공학회논문집
• /
• 제12권12호
• /
• pp.979-985
• /
• 2002

The paper presents the dynamic stability of a vertical cantilevered pipe conveying fluid and haying translational linear spring supports. Real pipe systems may have some elastic hanger supports or other mechanical attached parts. which can be regarded as attached spring supports. Governing equations are derived by energy expressions, and numerical technique using Galerkin's method is applied to the equations of small motion of the pipe. Effects of spring supports on the dynamic stability of a vortical cantilevered pipe conveying fluid are fully investigated for various locations and spring constants of elastic supports.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1168-1173
• /
• 2006

This research is to verify the cooling effect of the acting surface on the rotary motor using heat pipe and conventional cooling fan. In order to show the cooling performance of the rotary motor and heat pipe with the fin-typed heat sink, the surface temperature of the motor and condenser was measured in real time. The experiments were also conducted as for not only cooling device installed with heat pipe only, but with heat pipe and conventional cooling fan simultaneously.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3066-3073
• /
• 2009

3축 파이프 형상절단기에서 다양한 접합형상에 대하여 모관과 지관의 접합궤적을 수학적으로 유도하였다. 그 접합궤적에 절단폭 등의 공구 보정하여 실제로 가공할 절단궤적을 결정하여 이 공구궤적에 해당하는 CL-data를 생성하고, 또한 공구 궤적을 확인하기 위하여 ghost 기능을 구현하였다. 생성된 CL data를 PLC의 위치결정제어 모듈에 로딩하여 동시 3축($\alpha$, X, $\beta$축)의 이송을 제어하여 경로를 따라서 형상절단과 동시에 개선을 할 수 있도록 동시3축 파이프 형상절단 시스템을 개발하였다.

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.781-786
• /
• 2017

The presence of crust on the inner walls of metallic ducts impairs transportation because crust completely or partially hinders the passage of fluid to the processing unit and causes damage to equipment connected to the production line. Its localization is crucial. With the development of the electronic imaging system installed at the Argonauta/Nuclear Engineering Institute (IEN)/National Nuclear Energy Commission (CNEN) reactor, it became possible to visualize crust in the interior of metallic piping of small diameter using real-time neutron radiography images obtained with a low neutron flux. The obtained images showed the resistance offered by crust on the passage of water inside the pipe. No discrepancy of the flow profile at the bottom of the pipe, before the crust region, was registered. However, after the passage of liquid through the pipe, images of the disturbances of the flow were clear and discrepancies in the flow profile were steep. This shows that this technique added the assembled apparatus was efficient for the visualization of the crust and of the two-phase flows.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2883-2890
• /
• 2015

준설토 이송의 효율을 증가시키기 위한 연구로써 전자기력을 배관에 인가하여 유동저항을 줄이고, 윤활 층에서의 유속을 침강 임계속도이상으로 증가시키어 침강으로 인한 폐색을 방지하는 기술을 개발하였으며, 이를 대규모 장거리 송토현장에 적용하기 위하여 송토 거리 500m 규모의 현장에서 그 영향을 검토하는 실험을 진행하였으며, 실험결과 유동효율 증대로 인한 송토 유량이 30% 이상 증가함을 실험을 통해 보였다. 이를 검증하기 위하여 전자기장 인가장치와 계측장비로 초음파 유속 프로파일러를 사용하여 배관 내 유속프로파일을 모니터링 하여 그 데이터를 비교분석하여 효과를 검증하였다.

• 대한기계학회논문집A
• /
• 제32권3호
• /
• pp.267-273
• /
• 2008

The circular cylinder pipes are used in the many industrial areas. In this paper, the acoustic wave propagation in the pipe containing a gas is researched. First of all, the theory for the coupled acoustic wave propagation in a pipe is investigated. Acoustic wave propagation in pipe can not be occurred independently between the wave of the fluid and the shell. It requires complicated analysis. However, as a special case, the coupled wave in a high density pipe containing a light density medium is corresponded closely to the uncoupled in-vacuo shell waves and to the rigid-walled duct fluid waves. The coincidence frequencies of acoustic and shell modes contribute to the predominant energy transmission. The coincidence frequency means the frequency corresponding to the coincidence of the wavenumber in both acoustic and shell. In this paper, it is assumed that the internal medium is much lighter than the pipe shell. After the uncoupled acoustic wave in the internal medium and uncoupled shell wave are considered, the coincidence frequencies are found. The analysis is successfully confirmed by the verification of the experiment using the real long steel pipe. This work verifies that the coupled wave characteristic of the shell and the fluid is occurred as predominant energy transmission at the coincidence frequencies.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.186-192
• /
• 2022

Flow accelerated corrosion (FAC) is a type of pipe corrosion in which the pipe thickness decreases depending on the fluid flow conditions. In nuclear power plants, FAC mainly occurs in the carbon steel pipes of a secondary system. However, because the temperature of a secondary system pipe is over 150 ℃, in situ monitoring using a conventional ultrasonic non-destructive testing method is difficult. In our previous study, we developed a waveguide ultrasonic thickness measurement system. In this study, we applied a waveguide ultrasonic thickness measurement system to monitor the thinning of the pipe according to the change in pH. The Korea Atomic Energy Research Institute installed FAC-proof facilities, enabling the monitoring of internal fluid flow conditions, which were fixed for ~1000 h to analyze the effect of the pH. The measurement system operated without failure for ~3000 h and the pipe thickness was found to be reduced by ~10% at pH 9 compared to that at pH 7. The thickness of the pipe was measured using a microscope after the experiment, and the reliability of the system was confirmed with less than 1% error. This technology is expected to also be applicable to the thickness-reduction monitoring of other high-temperature materials.

• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.61-66
• /
• 2008

상수관망의 노후화에 따른 잦은 파괴로 인해 보다 효율적인 상수관망 모니터링시스템 구축이 중요한 문제가 되었다. 상수관망의 모니터링 시스템의 하나인 "Smart-Pipe 시스템"은 영구적이며 포괄적인 자동화된 형태의 SIM 시스템으로 기존의 모니터링 시스템에 비해 많은 장점을 가지고 있다. Smart-pipe를 도입하기 위해서는 상수관 파괴를 미리 예측하여 갑작스러운 상수관 파괴를 막는 것과 같이 smart-pipe 설치를 통해 발생하는 간접적 이익의 정량화가 우선되어야 한다. 그러나 이와 관련된 연구는 국내외적으로 매우 미비한 실정이다. 본 연구에서는 smart-pipe의 개념을 기존 상수관 모니터링 시스템과 비교하였으며 smartpipe 설치에 따른 이익을 수용가불편시간으로 정량화하는 방안을 제시하였다. 제안된 방법을 고양시의 상수관망에 적용하여 적용성을 검증하였으며, smart-pipe시스템의 도입을 위한 기초자료로 활용될 수 있을 것으로 판단되었다.