• 한국가스학회지
• /
• 제12권2호
• /
• pp.92-98
• /
• 2008

가스배관 열화부재의 실시간 역학물성 측정기술로 계장화 압입과 압입흔적 입체측정의 융합이 시도되었다. 압입하중-변위곡선을 계장화 압입시험으로 획득한 후 반사식 레이저 스캔너를 이용하여 압입흔적을 3차원으로 관찰하였다. 압흔 단면프로파일로부터 소성역 크기와 실제 접촉경계를 분석할 수 있었고, 두 값을 이용하여 소재의 항복강도와 경도를 계산하였다. 항복강도는 단축 인장시험에서 얻어진 값과 유사한 경향을 나타내었고, 경도는 재료쌓임 영향으로 압입곡선에서 계산된 값에 비해 $20{\sim}30%$ 낮은 값을 나타내었으나 최대 인장강도와 정량적인 관련성이 있음을 확인할 수 있었다. 덧붙여 압입하중 인가부의 형태를 수정하여 압입시험과 동시에 압흔주변 형상변화를 측정하기 위한 시스템도 고안되었다.

• 응용통계연구
• /
• 제30권1호
• /
• pp.57-68
• /
• 2017

대량의 데이터에 있어 전반적인 특성 및 구조를 파악하는데 유용하기 때문에 다양한 분야에서 군집분석을 사용하고 있다. Dempster 등 (1977)에서 정의된 expectation-maximization(EM) 알고리즘은 가장 보편적으로 사용되는 군집분석 방법이다. 선형모형의 유한혼합물(finite mixture of linear model) 기법 또한 군집분석 방법 중 많이 사용되는 방법이며 베이지안 군집방법은 Bernardo와 Giron (1988)이 군집에 대한 가중치 확률만 모를 경우 처음 적용하였다. 우리는 이 연구에서 일반적인 선형모형의 유한혼합물이 아닌 군집특정(cluster-specific) 변량효과를 모형에 포함하여 베이지안 분석방법인 깁스표집법(Gibbs sampling)을 사용한다. 제안한 모형의 특성 및 표집법에 대하여 설명하였고 모의실험 및 실제 데이터 분석을 통하여 모형의 유용성을 파악하였다. Hurn 등 (2003)의 CO2 데이터에 모형을 적용하여 변량효과가 없는 모형, 개체특정(subject-specific) 변량효과 모형과 비교하였다.

• 상하수도학회지
• /
• 제12권4호
• /
• pp.86-96
• /
• 1998

In this study, an intermittently aerated activated sludge process, modified process from conventional activated sludge process, was developed to treat high strength swine wastewater, which has been blamed as major pollutant for stream pollution. Therefore, the optimum cycle for oxic and anoxic period, SRT, and OLR were studied as design parameters. The effects of different time interval for oxic and anoxic period on nitrification and denitrification were examined by operating two reactors with 60/60min and 60/90min as oxic/anoxic period. Although the reactor with 60/60min showed complete denitrification of $NO_x-N$ generated during oxic period, the reactor with 60/90min showed incomplete nitrification due to the inactivity of nitrifier by accumulated $NH_3-N$ toxicity during anoxic period. Therefore, it is recommended to operate same interval for oxic and anoxic period. In order to determine the optimum cycle for oxic/anoxic period, four different reactors with 30/30, 60/60, 90/90 and 120/120min were examined. The reactor operation with 90/90min was optimum to get the most stable results in this study. However, the optimum cycle for oxic and anoxic period should be changed with characteristics of influent wastewater and operating conditions. According to lie operation results of three reactors with SRT of 15, 20 and 30days. The reactor with 2Odays SRT showed best removal efficiency of T-N. The optimum OLR would be $2.5Kg\;COD/m^3/day$ which showed the most stable nitrification and denitrification. Since characteristics of influent wastewater in the real system has a severe fluctuation, so it is very difficult to determine each interval for oxic and anoxic period. Therefore, ORP curves, describing the change of oxidation/reduction potential in reactor, can be used as a control parameter for automatic control of oxic and anoxic period. In other words, bending point (Nitrate Knee) of ORP curve during anoxic period could be used as a starting point of oxic period.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3251-3259
• /
• 2014

본 논문에서는 철근의 부식을 고려한 철근콘크리트(RC)보의 휨파괴거동을 규명하기 위하여 수행한 일련의 3점휨 파괴시험 및 해석적 연구 결과를 제시하였다. 실험적 연구를 위하여 총12개의 시편보를 제작하였으며, 염수분무시험 챔버를 이용하여 10개월간 촉진부식토록 하였다. 철근부식에 미치는 균열의 영향을 분석하기 위하여 일부 시험체를 공칭휨강도의 30% 와 60%에 해당하는 최대하중으로 미리 하중을 가한 후 염소분무 시험챔버에 보관하였다. 재령 5개월 및 10월에 각각 휨파괴시험을 실시하였으며 최대하중과 하중-처짐곡선을 측정하였다. 실험결과 철근의 부식정도에 따라 철근과 콘크리트간의 부착력 손실이 발생하고 그에 기인하여 휨강도는 최대 5.4%, 연성도는 최대 43%의 저하가 발생하여 철근의 부식이 최대 하중 보다 연성도에 미치는 영향이 큰 것으로 나타났다. 한편, Maaddawy의 해석적 모델을 이용한 수치해석결과 철근의 부식을 고려한 RC보의 휨파괴거동을 상당부분 잘 묘사할 수 있는 것으로 나타났다.

• Smart Structures and Systems
• /
• 제16권1호
• /
• pp.163-181
• /
• 2015

This research investigates the structural health monitoring of nonlinear structures after a major seismic event. It considers the identification of flag-shaped or pinched hysteresis behavior in response to structures as a more general case of a normal hysteresis curve without pinching. The method is based on the overall least squares methods and the log likelihood ratio test. In particular, the structural response is divided into different loading and unloading sub-half cycles. The overall least squares analysis is first implemented to obtain the minimum residual mean square estimates of structural parameters for each sub-half cycle with the number of segments assumed. The log likelihood ratio test is used to assess the likelihood of these nonlinear segments being true representations in the presence of noise and model error. The resulting regression coefficients for identified segmented regression models are finally used to obtain stiffness, yielding deformation and energy dissipation parameters. The performance of the method is illustrated using a single degree of freedom system and a suite of 20 earthquake records. RMS noise of 5%, 10%, 15% and 20% is added to the response data to assess the robustness of the identification routine. The proposed method is computationally efficient and accurate in identifying the damage parameters within 10% average of the known values even with 20% added noise. The method requires no user input and could thus be automated and performed in real-time for each sub-half cycle, with results available effectively immediately after an event as well as during an event, if required.

• Coupled systems mechanics
• /
• 제4권4호
• /
• pp.279-295
• /
• 2015

The article presents a theoretical-experimental approach developed for modeling the coefficient of sliding friction in the dynamic system tool-workpiece in slide diamond burnishing of low-alloy unhardened steels. The experimental setup, implemented on conventional lathe, includes a specially designed device, with a straight cantilever beam as body. The beam is simultaneously loaded by bending (from transverse slide friction force) and compression (from longitudinal burnishing force), which is a reason for geometrical nonlinearity. A method, based on the idea of separation of the variables (time and metric) before establishing the differential equation of motion, has been applied for dynamic modeling of the beam elastic curve. Between the longitudinal (burnishing force) and transverse (slide friction force) forces exists a correlation defined by Coulomb's law of sliding friction. On this basis, an analytical relationship between the beam deflection and the sought friction coefficient has been obtained. In order to measure the deflection of the beam, strain gauges connected in a "full bridge" type of circuit are used. A flexible adhesive is selected, which provides an opportunity for dynamic measurements through the constructed measuring system. The signal is proportional to the beam deflection and is fed to the analog input of USB DAQ board, from where the signal enters in a purposely created virtual instrument which is developed by means of Labview. The basic characteristic of the virtual instrument is the ability to record and visualize in a real time the measured deflection. The signal sampling frequency is chosen in accordance with Nyquist-Shannon sampling theorem. In order to obtain a regression model of the friction coefficient with the participation of the diamond burnishing process parameters, an experimental design with 55 experimental points is synthesized. A regression analysis and analysis of variance have been carried out. The influence of the factors on the friction coefficient is established using sections of the hyper-surface of the friction coefficient model with the hyper-planes.

• 한국광학회지
• /
• 제19권4호
• /
• pp.249-254
• /
• 2008

새 구조의 액정 엑스선 감지기를 만들었다. 이것은 액정판을 만들고 유리판을 얇게 식각한 다음, 그 유리판 위에 반사막과 광전도층을 연속하여 입힌 구조이다. 새 구조의 액정엑스선 감지기는 공정의 안정성, 대면적화, 감도 등에서 이미 상품화된 엑스선 감지기와도 충분히 경쟁할 수 있으며, 따라서 성공적으로 상용화 할 수 있음을 확인했다.

• 한국지진공학회논문집
• /
• 제25권2호
• /
• pp.53-58
• /
• 2021

Nuclear power plant's safety against seismic events is evaluated as risk values by probabilistic seismic safety assessment. The risk values vary by the seismic failure correlation between the structures, systems, and components (SSCs). However, most probabilistic seismic safety assessments idealized the seismic failure correlation between the SSCs as entirely dependent or independent. Such a consideration results in an inaccurate assessment result not reflecting real physical phenomenon. A nuclear power plant's seismic risk should be calculated with the appropriate seismic failure correlation coefficient between the SSCs for a reasonable outcome. An accident scenario that has an enormous impact on a nuclear power plant's seismic risk was selected. Moreover, the probabilistic seismic response analyses of a nuclear power plant were performed to derive appropriate seismic failure correlations between SSCs. Based on the analysis results, the seismic failure correlation coefficient between SSCs was derived, and the seismic fragility curve and core damage frequency of the loss of essential power event were calculated. Results were compared with the seismic fragility and core damage frequency of assuming the seismic failure correlations between SSCs were independent and entirely dependent.

• 국제지역연구
• /
• 제14권3호
• /
• pp.157-177
• /
• 2010

본 연구는 중국의 1985년부터 2008년까지의 각 성 시에 관한 패널데이터를 활용해서 재정분권화가 경제성장에 미치는 영향을 실증분석한다. 재정분권화를 위해 최근에 개발된 지표를 사용하고 지방정부의 자율재량권을 계량화해서 모형에 반영하여 다음의 결론을 얻는다. 인플레이션율의 증가는 중국경제에 긍정적인 영향을 미치는 것으로 나타났는데 이는 필립스커브에 의하면 고용량의 증가로 대변되는 중국경제성장과 상충되는 개념으로서 향후 중국경제의 불안정성을 암시하고 있다. 중국의 WTO가입은 중국경제에 긍정적인 역할을 해온 것으로 나타났는데 이는 고전학파의 자유무역이론을 뒷받침하는 실증결과로 해석할 수 있다. 지출분권화는 중국경제성장에 긍정적인 영향을 미치고, 또한 세입분권화도 지출분권화만큼 크지는 않지만 경제성장에 긍정적인 영향을 끼쳤다. 국세나 지방세를 많이 부과하면 경제성장에 부정적인 영향을 미치는 것으로 나타났고, 기대와는 달리 지방정부의 자율재량권을 계량화해서 반영한 지표는 경제성장과 관련이 없는 것으로 나타났다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.1020-1042
• /
• 2019

Reversible data hiding in encrypted images (RDHEI) provides some real-time cloud applications; i.e. the cloud, acting as a data-hider, automatically embeds timestamp in the encrypted image uploaded by a content owner. Many existing methods of RDHEI only satisfy user privacy in which the data-hider does not know the original image, but leaks owner privacy in which the receiver can obtains the original image by decryption and extraction. In the literature, the method of Zhang et al. is the one providing weak content-owner privacy in which the content-owner and data-hider have to share a data-hiding key. In this paper, we take care of the stronger notion, called strong content-owner privacy, and achieve it by presenting a new reversible data hiding in encrypted images. In the proposed method, image decryption and message extraction are separately controlled by different types of keys, and thus such functionalities are decoupled to solve the privacy problem. At the technique level, the original image is segmented along a Hilbert filling curve. To keep image privacy, segments are transformed into an encrypted image by using random permutation. The encrypted image does not reveal significant information about the original one. Data embedment can be realized by using pixel histogram-style hiding, since this property, can be preserved before or after encryption. The proposed method is a modular method to compile some specific reversible data hiding to those in encrypted image with content owner privacy. Finally, our experimental results show that the image quality is 50.85dB when the averaged payload is 0.12bpp.