• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.175-182
• /
• 2016

To investigate dyeing behaviors in accordance with dye structure in cold pad batch dyeing of cotton knit, monochlorotriazine-vinylsulfone bifunctional dyes and monofluorotriazine-vinylsulfone bifunctional dyes were prepared. The spectral property and solubility of the dyes were tested and compared with the imported dyes. In addition, exhaustion behaviors of individual and mixed dye solutions were measured to examine the influence of dye structure on dyeing behavior in cold pad batch dyeing. The substantivity, fixation, migration index and half dyeing time were also calculated for further analysis of dyeing behavior of the prepared dyes. As a result, both dyes exhibited the superior solubilities and satisfactory light absorption properties. Also, monofluorotriazine-vinylsulfone bifunctional dyes showed moderate sensitivity to alkalinity and proper kinetic index values compared with the monochlorotriazine-vinylsulfone bifunctional dyes and the imported dyes. The results indicated monofluorotriazine-vinylsulfone bifunctional structure of the dye is suitable for cold pad batch dyeing.

• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.46-54
• /
• 1999

The conventional dyeing of wool/cotton blends involves a two bath two step method, i.e., after dyeing of the wool component with acid dyes in an acidic dyebath at $100^\circ{C}$, the dyeing of the cotton component with reactive dyes in an alkaline dyebath is performed. In order to overcome the disadvantage of the conventional two bath two step dyeing method of wool/cotton blends, it had prompted significant effort to the development of the one bath dyeing method which can accomplish savings in time, energy and water usage. To improve dyeing property of wool/cotton blends, cotton component was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. This study was carried out to investigate dyeing possibilities of wool/cationized cotton blends with acid dye/reactive dye by one bath two step method.

• Textile Coloration and Finishing
• /
• v.19 no.2
• /
• pp.7-13
• /
• 2007

Photopolymerization of 2-hydroxyethyl methacrylate(HEMA), in the presence of ethyleneglycol dimethacrylate(EGDMA) and 1-Hydroxycyclohexyl phenyl ketone as crosslinker and photoinitiator, respectively, produced crosslinked poly-HEMA hydrogels. The hydrogels were colored by the exhaustion of vinylsul-phone-type reactive dyes. Good colorfastness to laundering was achieved when colored with C.I. Reactive Black 5. We investigated that the effect of coloration on the hydrophilicity and swelling properties of the films. More hydrophilic gel-surfaces were generated with in increase in coloration and crosslinking. Higher surface energy was observed with higher crosslinking level. The more rapid and higher water swellability of poly-HEMA gels after coloration may be resulted from a more opened gel structure by the easier hydration of the hydrophilic sulphonic acid groups of the reacted dyes in water.

• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.40-46
• /
• 1985

The equilibrium sorptions of C.I. Reactive Blue 19 and C.I. Reactive Blue 19 and C.I. Acid Blue 138 on Silk fibroin were investigated in the range of 50$^{\circ}C$, 70$^{\circ}C$, 90$^{\circ}C$ and to the pH range from 2.0 to 10.5. The results obtained are summarized as follows: 1) The amount of sorption of reactive dye was increased with the decrease of pH in dyeing solution and temperature. The amount of fixation showed the maximum value to pH 8.5 and 70$^{\circ}C$. 2) In acidic region, the sorption behavior of acid dye was similar to that of reactive dye, and Langmuir adsorption constant was increased with the decrease of pH. 3) Langmuir constant of both dyes was decreased with the increase of temperature, while standard affinity was increased. 4) The reaction of both dyes was exothermic and the values of $\Delta$S$^{\circ}$ were positive. 5) It was found that the sorption behavior of dyes against Silk fibroin could be described as Langmuir adsorption and Nernst distribution in lower pH region.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.22-30
• /
• 1995

The effects of agents in padding liquor on the fixation of vinylsulfonyl reactive dye of ground color and on the resist-dischargeability in resist-discharge printing of cotton fabrics with reactive/reactive dyes were investigated. Alkalis, such as sodium bicarbonate, sodium carbonate, sodium acetate and trichloro sodium acetate, were used to fix the dye for ground color on cotton fabrics. Sodium bicarbonate and sodium carbonate showed a good fixation of the dye for ground color, but they were ineffective to the white and the colored resistdsichargeabilities, which were caused by the fast fixation of the dye for ground color before its reaction with resist agent in printing paste. Therefore these are not suitable for the agent to fix the dyes for ground color because they deteriorate the resist-dischargeability. In case of sodium acetate, as the fixation yield of the dye for ground color was remarkably low. and the white resistdischargeability was not good, it had better not be used for the agent to fix the dye for ground color. However, the addition of sodium trichloroacetate to padding liquor gave a very good fixation yield of ground color, and showed an excellent resist-dischargeability. The effects of acetic acid in padding liquor on the fixation of the dye for ground color and on the resist-dischargeability were studied in case of immediate printing of resist-discharge pastes after padding and drying and in cases of printing after 1∼3 day-storage of padded goods. By the addition of 2% of 48% acetic acid aqueous solution to padding liquor, the white and the colored resist-dischargeabilities were improved and the fixation of the dye for ground color was good without any troubles. Especially, when the padded goods were stored for 2 or 3 days and printed with resist-discharge printing pastes, its addition was very effective on the resist-dischargeability.

• KSBB Journal
• /
• v.19 no.3
• /
• pp.200-205
• /
• 2004

For decolorization of various reactive dyes, 13 species of microbes were isolated from dyeing wastewater collected from Banweol industrial complex, Korea. Two strains among them showed good ability for removing celerity during the decolorization test with 5 different reactive dyes. And the optimal growth conditions were pH 7, 35$^{\circ}C$, yeast extract as nitrogen source, glucose as carbon source, and facultative anaerobic condition. As results, when Reactive Red 180 was used, 89 and 87% of decolorization efficiency were able to be obtained by using Bacillus anthracis and Bacillus cereus, respectively. Especially, Bacillus cereus showed good ability for decolorization of Reactive Blue 21, and the ratio was 76% Finally, it was considered that these two strains isolated in this study will be showed high decolorization ability to treat dyeing wastewater.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.2077-2083
• /
• 2000

For the application of wet air oxidation(WAO) process reactive dyes, remazol blacks has been selected as the subject for this study. The rate of decomposition relating to the reaction temperature and catalyst has been summarized during the catalytic wet air oxidation reaction. When 1.5 gram per liter of platinum is added titanium-dioxide and the partial pressure is adjusted to 6 atmosphere at the reaction temperature exceeding $200^{\circ}C$, more than 95% of the remazol blacks dyes were decomposed. When the reaction temperature was raised to $200^{\circ}C$, $220^{\circ}C$ and $250^{\circ}C$, respectively, for 240 minutes after adding the catalyst, the remaining rate of ultraviolet absorbance had dropped significantly to 18%, 12%, and 4%. At the reaction temperature of $250^{\circ}C$, color removal efficiency was approximately 95% or more after 120 minutes from the beginning of the reaction.

• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.50-57
• /
• 2006

Well known environmental wastes from dye industry were separated by the micellar electrokinetic capillary chromatography(MECC). These wastes include H-acid modifier and 2-naphthylamine-1,5-disulfonic acid, and are known to be the diazo components of the azo dye. The results of the separation were compared with the result obtained by the HPLC using ion-pairing mechnism. MECC method was also applied to separate a few direct dyes including Direct Blue 2, Direct Blue 6 and Direct Blue 15, and reactive dye such as Reactive Orange 4. Informations about the diazo components of any azo dye could be obtained by comparison of electropherogram of the reduction solution of given dye with those obtained from standard materials such as H-acid, J-acid, ${\gamma}$-acid, orthanilic acid, sulfanilic acid and 2-naphthylamine-1,5-disulfonic acid which are used as diazo components of the typical azo dyes. It has been concluded that MECC and HPLC with ion-pairing mechanism could be successfully applied for the analysis of unknown dyes and their diazo components.

• Journal of Korean Society on Water Environment
• /
• v.18 no.3
• /
• pp.245-251
• /
• 2002

Reactive dyes waste water, a toxic and refractory pollutant, was treated by an electrochemical method using $Ti/IrO_2$ as anode and Stainless Steel 316 as cathode. In this technique, sodium chloride as an electrolyte was added. A number of experiments were run in a batch system. Artificial samples (reactive blue 19, red 195, yellow 145) were used. Operation parameters, such as supporting electrolyte concentration, current density, pH and sample concentration have been investigated for their influences on COD and color removal efficiencies during electrolysis. After 5 and 90 minites of eletrolysis, color was reduced by 51.5% and 98.9% respectively. Under the condition of current density $10A/dm^2$, NaCl concentration 12mg/l and pH 3, 62.9% of $COD_{Cr}$ was removed after electrolysis for 90 minites. The optimum condition of color removal and COD reduction in this work was found to be the following : pH 3, sodium chloride concentration 20g/l, current density $10A/dm^2$. As a result, we confirmed to be effective to color removal and reduction of refractory organic material.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.33-38
• /
• 1995

In resist-discharge printing of cotton fabrics with reactive/reactive dyes the effects of intermediate drying on the white and the colored resist-dischargeabilities were studied. From the results of resist-discharge printing in case of 75% pick up, it was found that the most effective condition of intermediate drying which could at once prevent bleeding and improve the resist-dischargeability was 11$0^{\circ}C$ x 1min. The drying condition of 10$0^{\circ}C$ x 2min or 12$0^{\circ}C$ x 1min can be also recommended. It is important to pay close attention to the intermediate drying temperature and time. Because in case of 75% pick up when drying was carried on at 11$0^{\circ}C$ or 12$0^{\circ}C$ for more than 1 minute the resist-dischargeability was greatly lowerd by the fast fixation of ground color caused by high temperature, and in case of 100 % pick up the insufficient drying of ground color caused the resist-dischargeability to lower with giving rise to various troubles such as bleeding and smearing.