• Textile Coloration and Finishing
• /
• v.14 no.3
• /
• pp.34-43
• /
• 2002

Abstract-Many studies have been carried out to improve the dyeability of anionic dyes onto cellulosic fibers. Modification of control using cationic compounds has been most widely used. In this study, an effort was made to cationize cotton fabrics using cellulose-reactive allylamine polymer, namely triazinyl N,N'-dimethyl-N,N'-diallyl ammonium chloride in the previous work. The results showed that the dye-uptake of treated cotton fabrics with acid dyes and reactive dyes markedly increased in the various dyeing conditions. In addition, the dyeing rate of cationized cotton was also faster than that of untreated counterpart. Furthermore, the antimicrobial property was also investigated to determine the effects of cationization.

• KSBB Journal
• /
• v.8 no.2
• /
• pp.150-155
• /
• 1993

This study describes biodegradation of dyes which are used in textile industries. Dyes released into the environment from industrial waste water are considered to be a serious pollution problem because of the wide spread into environment with a variety of colors. The microorganisms used in this experiment were Pseudomonas species, which had been screened from aeration tank of waste water treatment. It was found that optimum concentrations for culture media were 14g of glucose, 6g of peptone, 160 mg of Na2HPO4, 200mg of KCl, 140mg of MgSO4,.7H2O,1.0g of KH2PO4, 400mg of NaCl, 200mg of CaCl2 and dye 10ppm per litre of distilled water. The high efficiency of dye degradation was obtained at pH 7-8 and $30-35^{\circ}C$. Strains screened are excellent for removal of azo and reactive dyes, which are relatively stable and difficult to degrade. Dyes of 10ppm such as mono-azo (Lot No. 180), di-azo (Lot No. 138) and reactive red(Lot No. 2) were mostly decolorlzed within 2 days and di-azo (Lot No. 151) and reactive red(Lot No. 34, No. 00166) were decolorized within 5 days in the controlled fermenter. In the case of reactive dyes, oxygen supplies showed lower biodegradability compared to anaerobic culture.

• Textile Coloration and Finishing
• /
• v.19 no.3
• /
• pp.18-25
• /
• 2007

The fixing behaviors of anthraquinone disperse dyes containing dimethylamino substituent, such as C. I. Disperse Violet 26(D.V.26) and C. I. Disperse Blue 14(D.V.14), or containing diamino substituent, such as C. I. Disperse Blue 73(D.B.73), and monochlorotriazinyl azo reactive dyes, such as C. I. Reactive Orange 13(R.O.13), C. I. Reactive Red 3(R.R.3). C. I. Reactive Yellow 2(R.Y.2) on polyester/cotton blend(P/C) fabrics were examined for the one-step printing of P/C fabrics. The high temperature steaming of $175^{\circ}C$ is the most satisfactory fixing method for P/C one-step printing with above disperse and reactive dyes among the four different fixing methods: $175^{\circ}C$ steaming, $102^{\circ}C$ steaming${\rightarrow}175^{\circ}C$ steaming, $190^{\circ}C$ thermosol, $102^{\circ}C$ steaming${\rightarrow}190^{\circ}C$ thermosol. $190^{\circ}C$ thermosol is unfit to fix R.R.3 and R.Y.2 whose heat stability is poor. It was found that D.V.26 and D.B.14 containing dimethylamino substituent are unstable for heat and alkali, but D.B.73 is stable for them to print P/C blend fabrics with R.O.13 which is also stable for heat. Therefore we found that D.B.73, R.O.13 and a pair of D.B.73 and R.O.13 were very suitable for one-step printing of P/C blend fabrics.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.26-33
• /
• 2004

Two reactive disperse dyes having $\alpha$-bromoacrylamide or acrylamide group were synthesized and their dyeing properties were compared with a disperse dye. Dyeing properties of reactive disperse dyes were strongly influenced by the chemical structure of reactive group. The amount of absorbed reactive disperse dye containing $\alpha$-bromoacrylamide group on polyester fiber was less than the disperse dye, and that on nylon fiber was much higher. When polyester and nylon fiber were simultaneously dyed in a dye pot, nylon fiber absorbed the reactive disperse dye more than polyester fiber. The reactive disperse dye having acrylamide group could reduces difference in color depth to a large extent, but the application of carrier or variation of dyebath pH were not sufficient for giving the same color depth to both fibers. The N/P union fabric could be dyed with the reactive disperse dye and its wash fastness were good to excellent.

• Textile Coloration and Finishing
• /
• v.19 no.3
• /
• pp.26-36
• /
• 2007

This study was carried out to treat the aqueous solutions containing reactive dyes(RB19, RR120 and RY179) by the Ozone demand flask method and adsorption process using activated carbon fiber(ACF) which are one of the main pollutants in dye wastewater. Ozone oxidation of three kinds of the reactive dyes was examined to investigate the reactivity of dyes with ozone, competition reaction and ozone utilization on various conditions for single- and multi-solute dye solution. Concentration of dyes was decreased continuously with increasing ozone dosage in the single-solute dye solutions. Competition quotient values were calculated to investigate the preferential oxidation of individual dyes in multi-solute dye solutions. Competition quotients(CQi) and values of the overall utilization efficiency, ${\eta}O_3$, were increased at 40mg/l of ozone dosage in multi-solute dye solutions. ACF(A-15) has much larger specific surface area$(1,584m^2/g-ACF)$ in comparison with granular activated carbon adsorbent (F400, $1,125m^2/g-GAC$), which is commonly used, and most of pores were found to be micropores with pore radius of 2nm and below. It was found that RB19 was most easily adsorbed among the dyes in this study. In the case of PCP (p-chlorophenol) and sucrose, which are single component adsorbate, adsorption capacities of ACF(A-15) were in good agreement with the batch adsorption measurement, and saturation time predicted of ACF columns for these components was also well agreed with practically measured time. But in the case of reactive dyes, which have relatively high molecular weight and aggregated with multi-components, adsorption capacities or saturation time predicted were not agreed with practically measured values.

• Textile Coloration and Finishing
• /
• v.10 no.3
• /
• pp.1-9
• /
• 1998

The dyeing properties of modified wool were examined with a series of acid, reactive and cationic dyes. Cationic agent and sulphamic acid were applied to wool fabric for dye assist and resist effect. Wool pretreated with cationic agent showed better uptake of acid and reactive dyes than did untreated wool. On the other hand, the dyeing behavior of wool pretreated with sulphamic acid was found as follows : Acid dyes were poorly resisted with a hydrophobic mechanism but acid dyes were strongly resisted with a hydrophilic mechanism. Reactive dyes were also found to be effectively resisted. Sulphamic acid introduces sulphonate group into wool's structure, it has increased better uptake of cationic dyes than untreated wool. The degree of differential uptake depends on the level of pretreatment and produces a variety of tone-on-tone and multicolor effect in piece dyeing.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.398-403
• /
• 2003

Due to the low biodegradability of dyes, conventional biological wastewater treatment systems are inefficient in treating dye wastewater. Various white-rot fungi were investigated for the decolorization of six industrial dyes (reactive blue 5, reactive blue 16, reactive black 5, acid black 52, reactive orange 16, and acid violet 43). Among ten fungi, T. versicolor KCTC 16781 was selected as a testing strain because this had the best performance of decolorization for six dyes from the results of the solid culture experiments. In liquid culture medium, T. versicolor KCTC 16781 decolorized over 96% of six dyes for 48 hrs. Laccase started to produce in the early stage of the culture, and showed the highest peak value of 2.3 U/mL in 24 hrs. Enzyme activity remained constant until the end of culture. Fungal decolorization is a promising alternative to replace or supplement present treatment process.

• Textile Coloration and Finishing
• /
• v.6 no.2
• /
• pp.30-39
• /
• 1994

To study the printing behaviors of Polyester and cotton(P/C) fabrics printed with disperse and reactive dyes, the effects of alkalis on the fixation of reactive dyes and the alkali-stability of disperse dyes in various methods of fixation were examined. The anthraquinone disperse dyes which have diamino derivatives as substituents without hydroxy group, such as C.I. Disperse Violet 1(D.V.1), C.I. Disperse Violet 28(D.V.28) and C.I.Disperse Blue 60(D.B.60) showed good results of fixation without regard to the concentration of NaHCO$_3$. In case of high temperature steaming(HTS) and unsaturated steaming(US)/HTS, D.V. 1 was alkali-stable and effective for P/C printing. A good result was obtained with D.V.1 and C.I.Reactive Orange 13(R.O.13) paste of 4% $K_{2}CO_{3}$. It was found that the unfixed D.V.28 bearing chloro group can hinder the fixation of monochlorotriaxinyl reactive dyes, and D.B.60 made little stain on 100% cotton. In thermosol(Tm), the dye uptake of D.V.1 was not decreased so much, but those of D.V.28 and D.B.60 were greatly decreased.

• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.301-307
• /
• 2018

In this research work, synthesis of sugarcane bagasse/zinc aluminium biocomposite and apple peel/zinc aluminium biocomposite and their application for removal of Reactive Red-241 and Acid Orange-7, respectively, was studied using various parameters. At pH 2 the sorption was the highest for both dyes. The trend showed that the dye sorption declined by decreasing the biocomposite dose and enhanced by increasing the dye concentration and temperature. Equilibrium was achieved at 60 minutes for Reactive Red-241 onto sugarcane bagasse/zinc aluminium biocomposite and 90 minutes for Acid Orange-7 onto apple peel/zinc aluminium biocomposite.The research data was good fitted to pseudo-2nd-order kinetic model and Langmuir isotherm. FT-IR analysis was used to confirm the biosorption of the selected dyes at the surface of biosorbent through various binding sites. Surface morphology modification of both biocomposites before and after biosorption was inspected through SEM. Crystallinity of biocomposite was examined through XRD analysis. It was implied that sugarcane bagasse/ zinc aluminium biocomposite and apple peel/ zinc aluminium biocomposite are good adsorbents for dyes elimination from aqueous solutions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.44-50
• /
• 2002

This research was performed to investigate the physical properties and color appearance of Hanji manufactured using bast fibers dyed separately by two reactive dyes with different colors. The breaking length of color Ha was above 7 km. The fastness was five grade; the use of reactive dyes made the color of the Hanji not to be faded away. The Hanji manufactured by mixing uniformly two types of bast fibers separately dyed showed the mixed color of two different colors. However, the shives showed their original colors, resulted in irregular color patterns all over the sheets. The color of color Hanji with different colors in the front and back side of sheets showed color difference between front and back side of the sheets. Accordingly, the color of the sheet has a reflection from the backside, resulted in Pink. The colors of the Hanji appeared in this study could not be found from the Hanji manufactured by traditional methods.