• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.262-270
• /
• 2013

Temporarily solubilized reactive disperse dyes containing ${\beta}$-sulfatoethylsulfonyl group were applied to 100% meta-aramid knitted fabric and their dyeing properties were investigated. Reactive disperse dyes showed relatively high K/S values on meta-aramid fabric when compared with conventional disperse dye or reactive dye, which showed very low K/S values. Color yields of reactive disperse dyes were highly dependent on dyeing pH and optimum results were obtained at pH 6. Percent exhaustion of reactive disperse dye on meta-aramid fabric was over 80% at 2% o.w.f of dye concentration. Wash fastness of pyridone-based reactive disperse dyes was very good to excellent while that of aminoazobenzene reactive disperse dyes was medium to good. Light fastness of all the reactive disperse dyes was very poor which seems to be due to the low photostability of meta-aramid fiber itself.

• 한국의류산업학회지
• /
• 제7권3호
• /
• pp.339-345
• /
• 2005

It is difficult to dye nylon/viscose rayon mixture fabrics by one-bath one-step dyeing method, because acid dyes and reactive dyes require acidic dyebath for adsorption and alkaline dyebath for fixation respectively. In order to overcome the disadvantage of the conventional two bath two step dyeing method of nylon/viscose rayon mixture fabric, it was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. The pretreated nylon/viscose rayon mixture fabrics produced cationized fabrics that could be dyed with acid dyes and reactive dyes under neutral condition. This study was carried out to investigate dyeing possibilities, surface reflectance spectra and color characteristics of cationized nylon/viscose rayon mixture fabrics with acid dyes and reactive dyes in a non-electrolytic and neutral dyebath by one bath one step dyeing method.

• 한국염색가공학회지
• /
• 제20권5호
• /
• pp.14-22
• /
• 2008

The present paper focuses on the application of commercial acid dyes and wool reactive dyes to casein protein fabric. Nine acid dyes and six wool reactive dyes were compared their dyeing properties as well as color fastness. The exhaustion yields were higher than 80 % which dramatically increased at pH 3. Excellent wash fastness was obtained with metal-complex acid and wool reactive dyes. Both light and rubbing fastness were overall good, but perspiration fastness was comparatively poor.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.1-7
• /
• 2004

Because acid dyes and reactive dyes require acidic condition for adsorption and alkaline condition for fixation respectively, it is difficult to dye nylon/cotton blends in one-bath one-step dyeing method. In this paper we tried to find out the suitable dye and dyeing condition for one-bath one-step dyeing of nylon/cotton blends. MNT type reactive dyes showed higher exhaustion on cotton as compared with MCT type dyes at neutral pH, which means that the MNT type reactive dyes are preferable for one-bath one-step dyeing method. The optimum condition for one-bath one-step dyeing of nylon/cotton blends was found to be pH 7. Wash fastness of fabrics dyed with half-milling type acid dyes was superior to that of fabrics dyed with levelling type acid dyes, when MNT type reactive dyes were used together.

• 한국환경보건학회지
• /
• 제21권4호
• /
• pp.49-55
• /
• 1995

Dyes are released into the environment as industrial wasterwater. Dyes are considered to be a pollution problem because of the wide spread into environment with a variety of colors. Continuous biodegradation of reactive dyes such as Rifacion Red H-3EB, Rifazol Blue BT, Rifacion Yellow P4G and Rifacion Brown RT were demonstrated using multistage rotating disc contactor immobilized by Aspergillus sojae B-10. Aspergillus sojae B-10 was cultivated the optimal medium containing 2.0% glucose, 0.08% $NaNO_3$, 0.1% $KH_2PO_4$ and 0.5% $MgSO_4\cdot 7H_2O$, pH 5 at 32$\circ$C. Mycelium of Aspergillus sojae B-10 were guck to the rotating disc for 10 days until steady state. For continuous biodegradation of reactive dyes by using rotating disc contactor, it was most effective biodegradation in the medium containing 1,000 ppm each dyes at the medium feeding rate of 20 ml per hour. Under the conditions biodegradation of each dyes on 2, 4 and 6 days were 20~50%, 75% and 96%, respectively. Therefore, practical application of reactive dyes were carried out at the feeding rate of 20 ml/h as synthetic wasterwater containing 500 ppm of mixture reactive dyes. It was found the highest levels of 94% biodegradation during 20 days.

• 한국염색가공학회지
• /
• 제14권3호
• /
• pp.26-33
• /
• 2002

Dyeing properties and crosslinking effect of bifunctional reactive dyes on chitosan fiber were investigated to improve the stability of chitosan fiber against the mild acidic solution and the wet processing. Chitosan fibers were crosslinked with epichlorohydrin for comparing purpose, and dyed with C. I. Reactive Red 194, C. I. Reactive Blue 50, and the reactive dye having two $\alpha$-bromoacrylamide groups at various concentrations. The initial dyeing rates of reactive dyes are rapid and chitosan fibers absorb the relatively large amount of dyes. The chitosan fibers dyed with these dyes show the low degree of swelling and the low solubility in 1 % acetic acid solution and also represent the higher thermal stability The reactive dye with two $\alpha$-bromoacrylamide groups shows higher crosslinking effect than other dyes.

• 한국염색가공학회지
• /
• 제15권5호
• /
• pp.301-309
• /
• 2003

Of the various types of dye that can be used to apply polyamide fibers, acid dyes and pre-metallised acid dyes are great in use so far. However, since these acid dyeings suffer from dye loss during laundering, recourse to an aftertreatment is usually necessary to achieve adequate fastness to washing. In the case of reactive dyes, the characteristically high washfastness of dyeings comes with the concomitant advantages of brightness and low environmental impact. Despite the obvious advantages, the commercialization of reactive dyes for polyamide fibers has not gained widespread success. In this context, the rewards for approach are likely to be considerable. Heterobifunctional reactive dyes were applied to polyamide fibers using various conditions. Optimum conditions and fixation were determined. The forms in which the vinylsulphone and hydrolyzed moieties were examined using HPLC-Mass. In addition, it was found that the extent of the washfastness secured, in terms of both change in color and staining of adjacent multifiber was being acceptable.

• 한국염색가공학회지
• /
• 제16권2호
• /
• pp.1-7
• /
• 2004

The dyeability of cotton fabrics treated with liquid ammonia was investigated using low-temperature and high-temperature reactive dyes. From the results of dyeing rates of direct dye, the inversion time was shown at 600 hours at $40^{\circ}C$, and however it was shown at 10 minutes at $80^{\circ}C$. This was applied to reactive dyeings. In the low-temperature reactive dyes, the color strength of the fabrics treated with liquid ammonia was lower than that of mercerized fabrics. By contrast, in the high-temperature reactive dyes, the color strength of the fabrics treated with liquid ammonia was higher than that of mercerized one.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.1-7
• /
• 2006

The dyeing properties of the several reactive dyes possessing different types of the reactive group on nylon 6 fabric have been investigated. Dyeing of nylon fiber with commercial reactive dyes was dependent on the dye bath pH. As pH increased, the extent of exhaustion decreased due to the deprotonation of the amino end group. But, the extent of fixation increased because of the enhanced reactivity with nylon fiber. It was found that all reactive dyes could be applied to nylon 6 reasonably at pH 5-6. But, the conflicting requirements of dye exhaustion and covalent bond formation limited the extent of fixation efficiency. The best method to improve the extent of the fixation efficiency of the reactive dyes was the conversion of sulphatoethylsulphone group to vinylsulphone group before dyeing with trisodium phosphate. The converted Supra type reactive dye gave the highest extent of fixation efficiency, which was about 90%.

• 한국환경보건학회지
• /
• 제21권4호
• /
• pp.10-16
• /
• 1995

Dyes are released into the environment from industrial wasterwater. They are considered to be a pollution problem because of the wide spread into environment with a variety of colors. In order to biological treatment of industrial dyes waste water, biodegradation of reactive dyes such as Rifacion Red H-3EB, Rifazol Blue BT, Rifacion Yellow P-4G and Rifacion Brown RT were carried out decolorized by Aspergillus sojae B-10. Aspergillus sojae B-10 showed the almost completely biodegradation ability when it was cultivated in a 2.0% glucose, 0.06% sodium nitrite, 0.1% $KH_2PO_4$, 0.5% $MgSO_4\cdot 7H_2O$ containing each reactive dyes (500 ppm) under the optimal conditions of 32$\circ$C and pH 5. The mycelium of Aspergillus sojae B-10 was produced extracellular enzyme which has concerned responsible for dyes biodegradation. Under optimal conditions, reactive dyes started being decolorized within 24 hr and its was almost decolorized c ompletely after 5 days incubation. Rifazol blue RT was not completely decolorized until 5 days of cultivation. Rafacion Red BT, Rifasol blue BT and Rifacion yellow P-4G were completely decolorized after 5 days cultivation.