• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.25-33
• /
• 1993

Formation reaction of Mn-Zn ferrite depending on various synthetic conditions of wet process was investigated using FeCl2.nH2O(n≒4), MnCl2.4H2O, ZnCl2 as starting materials. A stable intermediate precipitate was formed by the addition of H2O2. And the precipitate was hard to transform to spinel phase of Mn-Zn Fe2O4. Single phase of Mn-Zn Fe2O4 spinel was obtained above 8$0^{\circ}C$ reaction temperature. The powder had spherical particle shape and 0.02~0.05${\mu}{\textrm}{m}$ particle size. Fe(OH)2 solid solution, -FeO(OH) solid solution, -FeOOH, Mn-Zn Fe2O4 spinel were formed with air flow rate 180$\ell$/hr. However, single phase of Mn-Zn Fe2O4 spinel with cubic particle shape and 0.1~0.2${\mu}{\textrm}{m}$ particle size was formed with synthetic conditions of 8$0^{\circ}C$ and 90 munutes. The particle shape of the -FeOOH was needle-like.

• 한국식품영양학회지
• /
• 제5권1호
• /
• pp.23-32
• /
• 1992

Kinetic studies of nucleophilic substitution reactions of dansyl, bansyl, dabsyl chlorides with pyridines have been investigated at $0^{\circ}C$ in a range of methanol-acetonitrile binary solvent mixtures. The order of magnitude for reactivity of substrates with pyridines in the same reaction condition is dabsyl chloride>dansyl chloride> bansyl chloride. The value of $\rho$n(-2.29~ -4.66) and $\beta$(0.537~0.901) associated with a change substituent in the nucleophile are large and indicate a relatively advanced bond formation in the transition state. Solvatochromic correlations were predicted the increase of bond formation transition state according to the increasing MeCN contents, showing the greater contribution of polarity polarizability ($\pi$*) than hydro-gen bond donar acidity($\alpha$). We conclude that the reactions of dansyl, bansyl, dabsyl chlorides with pyridines proceed via associative Sn2 type reaction mechanism.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.85-91
• /
• 2005

Effect of different cations to the formation of iron oxyhydroxide was studied using $M\ddot{o}ssbauer$ spectroscopy, X-ray diffraction (XRD) and BET. Redox Potential and pH were measured for the determination of the internal reaction rate, as well. The phases of iron oxyhydroxide could not be the same with each other, due to the presence of different cations in solution. Although the oxyhydroxide compound was composed of the same phases, the fraction of each phase was different from each other. The internal reaction rate was varied by the substitution of cation. It could be a cause of the different phase and particle size of oxyhydroxide compound.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.31-34
• /
• 2010

Noble N-substituted-3-fluoropyrroles derivatives were prepared from new precursor via ring formation. The addition reaction of ethyl iododifluoroacetate to vinyl trimethylsilane under the Cu(0) catalyst resulted in the formation of ethyl-2,2-difluoro-4-iodo-4-(trimethylsilyl)butanolate, which reacted with diisobutylaluminium hydride at $-30^{\circ}C$ to yield 2,2-diflouro-4-iodo-4-(trimethylsilyl)butanal. Finally, a series of N-substituted-3-fluoropyrrole derivatives were synthesized by the reaction of 2,2-diflouro-4-iodo-4-(trimethylsilyl)butanal with $NH_4OH$ or primary amines followed by reaction with KF solution.

• 대한화학회지
• /
• 제11권4호
• /
• pp.170-172
• /
• 1967

2-Phenyl-5-substituted phenyltetrazole and 2-substituted phenyl-5-phenyltetrazole were prepared from the corresponding hydrazone and phenyl azide with 2-methoxyethanol and metallic sodium as reaction medium at 110~115 $^{\circ}C$. At this reaction condition, however, the preparation of 2-substituted phenyl-5-phenyltetrazoles with substituents of relatively high Hammett substituent constant was unsuccessful. Surprisingly it was found that the solvent molecule was exchanged with substituent during the reaction when tried to obtain 2-m-fluorophenyl-5-phenyltetrazole using benzaldehyde m-fluorophenylhydrazone as starting material. Also disscussed the effect of electronic nature of substituents on the formation of 2,5-diphenyltetrazole derivatives.

• Bulletin of the Korean Chemical Society
• /
• 제28권9호
• /
• pp.1515-1518
• /
• 2007

A preparative method of Me2SCuX (X = Cl, Br) via one-pot reaction was developed from common chemicals such as benzyl halide, DMSO, and Cu(0). In the reaction mixture small molecules such as methyl halide and dimethyl sulfide etc. were efficiently generated in situ, resulting in the formation of Me2SCuX. Oxidation of Cu(0) in reacting with both benzyl halide (starting material) and methyl halide (in situ generated product) to Cu(I) followed by complexing with dimethyl sulfide (in situ generated product) could explain the formation of Me2SCuX. In particular we found out that heterogeneous reaction of Me2SCuX and arenediazonium tetrafluoroborate in acetonitrile was so effective to afford corresponding bromoaromatics under mild conditions.

• 한국세라믹학회지
• /
• 제37권3호
• /
• pp.280-287
• /
• 2000

Adsorption behavior and amount of phenolic resin followed silica (SiO2) formation onto silicon nitride(Si3N4) surface were investigated using electrokinetic sonic amplitude (ESA) technique and with UV spectrometer, to fabricate Si3N4/SiC nano-composite based on reaction between SiO2 formed and phenolic resin absorbed onto Si3N4 particle. The amount of SiO2 formed and carbon from phenolic resin absorbed onto Si3N4 surface were calculated quantitatively to adjust the reaction between SiO2 and phenolic resin, resulting in no residual SiO2 and carbon. As a result, pre-heated tempeature for optimized reaction was below 25$0^{\circ}C$, in which there was no residual SiO2 and carbon.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.365-372
• /
• 1991

LAS (lithium aluminosilicate) sol was synthesized using the hydrolysis-condensation reaction of TEOS, chelated Al(OBus)3 and Li-salt with H2O in alcohol (EtOH+2-Propanol) medium. Effects of important reaction parameters on the properties of sol and gel-derived LAS were examined. The crystallization of the sol-gel derived LAS with ${\beta}$-spodumene composition began at ∼600$^{\circ}C$, and a series of polymorphic transformations occurred as temperature was increased to 1100$^{\circ}C$: amorphous LAS\longrightarrowhexagonal LiAl(SiO3)2\longrightarrow${\beta}$-spodumene. Lowering Li content in the gel enhanced densification and retarded the crystallization significantly. Optimum reaction conditions of LAS sol formation for thin coating applications were derived from rheological measurements, and these can be summarized as: H2O/total alkoxides molar ratio=4, pH=∼2.5, and aging time of ∼250h.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1526-1530
• /
• 2009

Solvent extraction reaction of Zn(II) by Alamine336 from strong HCl solution up to 10 M was identified by analyzing the data reported in the literature. The equilibrium constant of this reaction was estimated by considering the complex formation between zinc and chloride ion. The necessary thermodynamic parameters, such as equilibrium constant for the formation of complexes and the interaction parameters, were evaluated from the thermodynamic data reported in the literature. The following solvent extraction reaction and the equilibrium constant was obtained by considering the activity coefficients of solutes present in the aqueous phase with Bromley equation. $Zn^{2+}\;2Cl^{-}\;+\;R_3NHCl_{org}\;=\;ZnCl_3R_3NH_{org},\;K_{ex}\;=\;6.33\;{\times}\;10^2$ There was a good agreement between measured and calculated distribution coefficients of Zn(II).

• 한국입자에어로졸학회지
• /
• 제7권1호
• /
• pp.1-8
• /
• 2011

In this study, the formation of nanoparticles by a reaction of ozone with the volatile organic compounds(VOCs) emitted from a commercial home cleaner liquid was investigated using a $1-m^3$ reaction chamber($1{\times}1{\times}1m$). The home cleaner liquid was found to contain many VOCs, particularly terpenes. Some of these VOCs are known to readily react with ozone, forming indoor secondary pollutants. The correlation of particle concentration and reacted ozone concentration was examined with injections of three different ozone concentrations; 50, 100 and 200 ppb. The secondary nanoparticles were formed faster, with their numbers and mass concentrations becoming higher on increasing the concentration of ozone injected.