• 청정기술
• /
• 제28권1호
• /
• pp.32-37
• /
• 2022

Food waste is produced from food factories, food services, and home kitchens. The generated mass reached 5.4 million tons/year in 2020. The basic management technology for such waste has been biological degradation under an anaerobic environment. However, the whole process is intrinsically slow and considerably affected by the inner physicochemical properties of the waste and other surrounding conditions, which makes optimization of the process difficult. The most promising options to counter this massive generation of waste are eco-friendly treatments or recycling. As a preliminary step for these options, attempts were made to evaluate the feasibility and usability of three simulative models based on reaction kinetics. Model (A) predicted relative changes over reaction time for reactant, intermediate, and product. Overall, an increased reaction rate produced less intermediate and more product, thereby leading to a shorter total reaction time. Particle diminishing model (B) predicted reduction of the total waste mass. The smaller particles diminished faster along with the dominant effect of microbial reaction. In Model (C), long-chain cellulose was predicted to transform into reducing sugar. At a standard condition, 48% of cellulose molecules having 10⁵ repeating units turned into reducing sugar after 100 h. Also it was found that the optimal enzyme concentration where the highest amount of remnant sugar was harvested was 1 mg L^-1.

• 자원환경지질
• /
• 제42권5호
• /
• pp.395-401
• /
• 2009

스멕타이트-일라이트 (SI)의 전이 반응은 쇄설성 퇴적암 지역에 흔히 볼 수 있는 광물 반응이다. 지난 40여년 동안 SI 전이 반응의 중요성에 대한 논문들이 많이 출간되었는데 이는 스멕타이트가 일라이트로 변하는 정도 즉 "illitization" 이 석유의 개발, 퇴적물의 화학적 변화 및 물리적 성질변화 에 많은 연계성이 있기 때문이다. 기존의 S-I 상전이에 대한 메커니즘 연구에서는 layer-by-layer reaction 에 의한 solid state 반응 혹은 dissolution/precipitation 반응으로 집약되지만 박테리아 반응의 역할을 전혀 고려하지 않았다. 무산소 환경에서 박테리아와 점토광물의 반응에 대한 연구, 특히 스멕타이트와 철 환원 박테리아의 반응 작용에 대한 연구에서는 철 환원 박테리아가 스멕타이트 구조 속에 있는 철을 환원시켜 에너지를 얻는다고 밝혀졌다. 최근 발표된 논문들은 미생물의 철 환원 작용에 의하여 S-I 상전이가 일어날 수 있다고 보고되었는데, 이는 기존의 상전이에 대한 개념에 즉 고온, 고압, 오랜 시간이 S-I 전이의 필수 조건이라는 일반적인 해석에 반하는 것으로 새로운 연구 분야의 가능성을 시사하고 있다. 현재까지 발표된 논문에 의하면 박테리아가 S-I 반응을 촉진지킴으로 고온, 고압, 혹은 상당시간의 속성작용이 전제조건으로 작용하지 않을 수 있다는 가능성을 시사한다. 하지만 박테리아가 철을 환원함과 동시에 스멕타이트를 일라이트로 전이시킴에 있어서의 메커니즘에 대한 이해는 아직 미비하다. 따라서 이 논문에서는 현재까지 밝혀진 SI 반응을 살펴보고, 미생물 광물간의 반응작용에 있어서 연구 방법을 소개함을 목적으로 한다.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.69-80
• /
• 2007

The purpose of this study was to investigate the difference of ground reaction forces of swimming athletes during their starting motion and to find out the most effective starting motions which were used in swimming athletes. The subjects were 9 male and 8 female high school swimming athletes who were athletic career over 7 years and used three starting motions in competition. The ground reaction forces were measured from each athletes performing three starting motion each of the open grap starting motion, closed grap starting motion and track starting motion. For the measurement, the force platform of AMTI company was utilized, and the analysis on measured ground reaction forces were used of Biosoft(Ver. 1.0). The items measured were stance time, Fz max deceleration force and Fz max deceleration force time, Fz mid stance force and Fz mid stance force time, Fz max acceleration force and Fz max acceleration force time, Torque maximum and Torque maximum time, Torque average, Excursion along Y axis of center of pressure of foot, Excursion along X axis of center of pressure of foot, Length of center of pressure of foot, Average velocity of center of pressure of foot. The data measured by the closed grap starting motion, open grap starting motion and track starting motion were analyzed by one-way repeated ANOVA. The results were as follows ; 1. The Fz max deceleration force time, Fz mid stance force, Fz max acceleration force, Torque maximum and Torque maximum time, Excursion along Y axis of center of pressure of foot, Average velocity of center of pressure of foot were significantly fast and large in the closed grap starting motion then open grap starting motion and track starting motion. 2. The Excursion along Y axis of center of pressure of foot was significantly long in the closed grap starting motion then open grap starting motion and track starting motion.

• 한국광물학회지
• /
• 제22권3호
• /
• pp.241-248
• /
• 2009

비정질 $SiO_2$와 $Al(OH)_3{\cdot}xH_{2}O$를 출발물질로 하여 $250^{\circ}C$, $30\;kg/cm^2$의 조건에서 반응시간을 2~36시간까지 변화시키면서 캐올리나이트를 수열합성하였다. 합성된 캐올리나이트에 대하여 XRD, IR, TG-DTA, TEM 및 EDS를 사용하여 특성분석을 실시하였으며, 이로부터 합성된 캐올리나이트의 반응 시간별 광물학적 특성변화를 규명하고자 하였다. X선 회절 분석결과, 반응시간 2시간에 비정질 출발물질에서부터 뵈마이트가 결정화되었으며 2시간 이상 반응시키면, 뵈마이트 피크가 소멸되거나 혹은 감소하였다. 캐올리나이트는 반응 10시간 이후 생성되기 시작하였으며 반응시간의 증가에 따라 결정도가 점차 증가하였다. TGA 분석결과, 반응시간 36시간 이후에 약 13 wt%의 총중량손실이 관찰되었으며 DTA 분석결과 $258^{\circ}C$에서 관찰된 뵈마이트에 의한 발열피크는 서서히 감소되어 반응시간 10시간 이후에 관찰되지 않았고 스피넬상으로의 전이를 나타내는 발열피크는 반응시간 5시간 이후에 관찰되기 시작하여 반응시간 증가에 따라 피크강도가 증가되었다. FT-IR 분석 결과, 합성 캐올리나이트의 Al-OH 신축진동 밴드인 $3696\;cm^{-1}$과 $3620\;cm^{-1}$사이에서 $3670\;cm^{-1}$과 $3653\;cm^{-1}$의 두개의 작은 피크 분리 및 $940\;cm^{-1}$과 $915\;cm^{-1}$에서 관찰된 캐올리나이트의 특징적인 흡수띠의 관찰은 비교적 질서도가 우수한 캐올리나이트가 합성된 것을 지시하였다. TEM 분석결과, 반응시간 15시간 후에서야 비로소 (001)면의 성장으로 판상형의 캐올리나이트가 형성되었다. 반응시간 36시간 후 합성 캐올리나이트는 단순 판상형에서 육각외형의 판상형으로 변화됨을 확인되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.514-517
• /
• 2008

Water gas shift(WGS) is an important step in fuel process for fuel cells, and improperness of commercial WGS catalysts for use in fuel cell systems has prompted numerous researches on noble metal catalysts. A selected noble metal catalyst for water gas shift reaction(WGS) was prepared with various metal loadings. The prepared catalysts were tested under two feeding conditions. At moderate residence time, carbon monoxide conversion was much higher on the noble metal catalysts as compared to commercial high-temperature shift catalyst. Effects of metal loading were examined by activity tests at short residence time. Higher metal loading effected higher reaction rate. The kinetic data was fitted to simple reaction equations and effectiveness factor was estimated. The results suggest the necessity of a structural design for the highly active noble metal catalysts.

• 한국화재소방학회논문지
• /
• 제12권1호
• /
• pp.9-14
• /
• 1998

활성탄상에서 hexafluoropropylene (HFP)을 불화하여 heptafluoropropane (HFC-227ea)을 합성하 는 연구를 하였다. 반웅조건은 일정한 주입몰비(HF !HFP)와 정체시간에서 반웅온도를 50'b부터 4 400'b까지 변화하여 실시하였다. 최적의 반웅온도는 HF !HFP몰비 2.5와 정체시간 238초에서 200 'b 정도였다. 이 조건하에서 얻은 HFC-227ea수율은 99%이상이었으며 촉매의 비활성화는 나타나지 않았 다. 따라서 활성탄이 HFC-227ea를 얻기 위해서는 우수한 성놓을 가진 촉매이었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.375-375
• /
• 2006

The preparation methods are to be used as "melting method" and "absorption method", respectively. The reaction mixture in the reaction container was heating up the reaction mixture to $200^{\circ}C$ for 2 hour. The mixing time of lab scale preparation should be provided quit long, instead of the short working time in a compounder vessel. And The PP-PCM mixture in the reaction container was heating up the mixture around $60-80^{\circ}C$ for 2 hour. A melting method of frozen gel with 50/50 weight ratio of polypropylene-normal octadecane was prepared by adding PP chip and normal octadecane. An absorption method of frozen gel with 70/30 weight ratio of PP 4.8-normal n-octadecane was prepared by adding PP powder and normal octadecnae.

• International Journal of Fluid Machinery and Systems
• /
• 제2권3호
• /
• pp.254-259
• /
• 2009

In this paper it was attempted to treat the hydrodynamic journal bearing as a time-based nonlinear reaction source in each step of rotor rotation in order to observe the bearing effect more realistically and accurately in stead of the conventional method of simple linearized stiffness and damping. Lubrication analysis based on finite element method is employed to calculate the hydrodynamic reaction of bearing and Newmark's method was used to calculate the rotor dynamics in the time domain. Simulation for an industrial electrical motor showed remarkable results with differences compared to those by the conventional method in the dynamic behavior of the rotor.

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.20-24
• /
• 2002

The surface of polysulfone membranes has been modified using the fluorine chemicals, ITFE (2-iodo-1,1,1-trifluoro-ethane F.W.=209.94) and PFPI (1H,1H-pentafluoro-n-propyl iodide F.W.=259.95), and PFI (1H,1H,2H,2H-perfluorohexyl iodide, F.W.=373.99) based on Friedel-Crafts reaction mechanism with varying reaction temperatures, reaction time, and catalysis types. The resulting membranes were characterized through mainly the contact angle measurement and pure water permeability. The smaller reactant shows the larger contact angles. FeBr$_3$ catalyst is more effective than AlCl$_3$. Typically, the PS film treated with ITFE at $25^{\circ}C$ under FeBr$_3$ catalyst showed the contact angle 78.5$^{\circ}C$ which indicated 10% over the value of unreacted PS films. More than 50% of pure water flux 8.0 g/$m^2$hr, reduced at reaction time 10 min relative to the original flux, 3.49 g/$m^2$hr.

• 한국세라믹학회지
• /
• 제24권1호
• /
• pp.17-22
• /
• 1987

This study is to detect the synthetic condition for the formation of Sr-Ferrite(SrFe12O19) by hydrothermally reaction. Mixed suspension of SrCl26H2O and FeCl3 6H2O were fixed on pH and were subjected to autoclavings at various temperature(150∼300$^{\circ}C$), reaction time(2hrs.∼48hrs.). The Sr-Ferrite powders were synthesized at 150$^{\circ}C$ for 36hrs, 200$^{\circ}C$ for 4hrs and 250$^{\circ}C$ for 2hrs. Synthesized powders were increased particle sizes at longer reaction time and higher reaction temperature. It has hexagonal ferrite M-type structure and has high purity of SrO.5.6 Fe2O3 composition.