• 시큐리티연구
• /
• 제19호
• /
• pp.207-223
• /
• 2009

본 연구의 목적은 경호 중 우발 상황 시 경호원들의 자세를 분석하여 객관적이고 정량적인 기초자료를 얻는데 있다. 이러한 목적을 달성하기 위하여 경호무도 수련한 4명을 대상으로 하였으며, 경호자세의 반응시간 및 근육의 활성도를 분석하기 위하여 EMG시스템을 활용하여 분석한 결과 다음과 같은 결론을 얻었다. 경호자세의 전체반응시간은 평균 $1.38{\pm}0.07$초 소요되었다. 신호에 대한 1구간의 반응시간은 구간은 평균 $0.22{\pm}0.02$초였으며, 신호의 확인 이후 2구간의 반응시간은 평균 $0.62{\pm}0.10$초로 추진력을 얻기 위해 가장 긴 시간이 소요되었으며, 그다음 3구간은 $0.29{\pm}0.02$초, 4구간은 $0.26{\pm}0.02$초로 점점 시간이 단축되는 것을 알 수 있었다. 경호자세의 각 근육의 활성도는 1구간에서도 좌우 전경골근, 2구간에서는 좌우 전경골근과 우측 비복근, 3구간에서는 우측 전경골근과 비복근, 4구간에서는 좌우 대퇴이두근과 우측 대퇴직근의 활성도가 크게 나타내보였다. 또, 1구간과 2구간은 주로 하퇴근육을 많이 사용하였으며, 3구간과 4구간에서는 대퇴와 하퇴근육을 즉, 하지 전체를 근육을 사용하는 것을 알 수 있었다.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.505-510
• /
• 2000

In this investigation, we fabricated RBSN (Reaction Bonded Silicon Nitride) using the static nitriding system which could be advantageous for commercialization. Firstly, Si compacts of different sizes were made, and then nitridation rates were investigated as a function of added static gas pressure. The reaction schedule was obtained by pre-experiments. In case of small samples, the variation of ${\alpha}$, ${\beta}$ phases between the inside and the outside region of the specimens was examined after the samples were nitrided under 1 bar and 1.5 bar reaction pressure. On the other hand, large samples of Si compact with the size of 36 mm for diameter and 23 mm for thickness were nitrided for 26 hours of the total nitridation time, which showed a complete and homogeneous nitriding reaction from the outside to the inside of the samples, although the time was considerably shorter than that needed for convertional nitridation. Nitridation rates obtained at the early stage of reaction were proportional to the reaction gas pressures. The sequences of the nitridation reaction with the thickness were as follows 1) the outside, 2) the inside and 3) the intermediate area of the specimen. These results wer eobtained from the coloration of cross sectioned specimens that had various nitridation rates. Total nitriding reaction kinetics was controlled by chemical reaction, not by diffusion of the nitrogen gas.

• 한국안전학회지
• /
• 제21권5호
• /
• pp.103-111
• /
• 2006

The purpose of this study was to analyse the relationships between cognitive abilities and driving characteristics of elderly drivers. Driving characteristics of elderly and younger drivers who were driving a fixed base driving simulator vehicle were examined. Participants consisted of 12 drivers over age 65 (the 'older' group) and 12 drivers between the ages of 25 and 55 (the "younger" group). As indices of cognitive ability, critical flicker fusion frequency (CFF) tests and cognitive reaction tests were given before the driving task. CFF was also tested after the simulated driving task for both groups. Cognitive reaction tests, which were composed of speed estimation tests, multiple choice reaction tests and obstacle avoidance tests, were developed by the Korean Road Traffic Safety Authority in 2003. CFF values between the two groups exhibited significant differences both before and after the task, with a p-value less than 0.01 and a t-value of -3.01 before the test and a p-value less than 0.031 and a t-value of -2.35 after the test. Older drivers' CFF values were lower than those of the younger. However, there was no difference in older or younger driver CFF values before and after the task within the same group. Except for the multiple choice reaction test, there was no difference in cognitive reaction test results between the two groups. The elderly drivers made more errors though they did not differ from the younger drivers in reaction times. At the simulated driving task the reaction time of the elderly driver was longer than that of the younger; however, the driving speed of the elderly was lower and the number of collisions greater. There was a positive correlation (r=.496) between the number of errors in the multiple choice reaction test and the number of collisions in the driving task. Therefore, it was identified that critical attributes contributing to automobile crashes involving elderly drivers included cognitive difficulty in judging and responding to complex situations.

• 한국환경기술학회지
• /
• 제19권6호
• /
• pp.556-562
• /
• 2018

현재 하수종말처리장은 질소와 인의 방류수 수질기준 강화로 생물학적 처리 후 약품주입으로 잔류인의 처리를 하고 있는 실정에서 방류수 수질기준은 확보가 가능하나, 약품주입량의 과다와 발생되는 슬러지의 증대 및 발생슬러지의 탈수효율 저하로 슬러지처리과정에서 또 다른 문제가 발생하여 처리에 대한 신뢰성이 결여되어 있는 실정이다. 그러므로 본 연구는 기존 하수종말처리장에서 발생하고 있는 문제에 대하여 최소의 반응시간과 슬러지 발생량의 최소화를 토대로 생물학적 고도처리를 적용한 하수처리장에서 방류수 수질기준의 강화에 따라 생물학적 처리로 확보하기 어려운 안정적 처리방식과 처리수질변동에 대한 적응 및 질소와 인의 처리기준을 맞추기 위하여 기존 하수처리 방식에 Electro Coagulation and Oxidation system을 적용한 결과 다음과 같다. 1) Al-SUS(stainless steel)로 배치한 전극에서 반응시간대와 상관없이 $15mA/cm^2$의 전류밀도에서 BOD, TN 및 TP의 처리효율이 $5mA/cm^2$에서의 처리효율보다 높게 나타났으나, 전류밀도 $10mA/cm^2$ 이상만을 유지하여도 TP의 경우 대부분 0.1 mg/L 정도로 처리가 가능하며, 특히, 반응시간을 10 min으로 유지할 경우 TP농도는 전류밀도와 상관없이 0.06 mg/L 이하로 방류수 수질기준 0.1 mg/L 이하를 유지할 수 있었다. 2) TP농도의 변화는 전류밀도의 변화에 영향을 크게 받지 않으며, 오히려 반응시간에 따라 처리수의 농도가 변화하는 것으로 전기응집반응의 경우 수초~수분이 요구되나 전기산화와 동시에 반응이 일어나야 하므로 적절한 전기응집산화의 반응시간은 10 min 이상이 요구되는 것으로 연구되었다. 3) 결과적으로 본 연구에서 생활하수의 TN 및 TP처리를 위한 전기응집산화공정의 경제적인 전류밀도는 $15mA/cm^2$이하, 반응시간은 10 min을 유지하는 것이 적절한 것으로 연구되었다.

• 동굴
• /
• 제71호
• /
• pp.5-11
• /
• 2006

A theoretical investigation of the solid phase mechanochemical synthesis of nano sized target product on the basis of dilution of the initial powdered reagent mixture by another product of an exchange reaction is presented. On the basis of the proposed 3 mode particle size distribution in mechanically activated mixture, optimal molar ratios of the components in mixture are calculated, providing the occurrence of impact friction contacts of reagent particles and excluding aggregation of the nanosized particles of the target reaction product. Derivation of kinetic equations for mechanochemical synthesis of nanoscale particles by the final product dilution method in the systems of exchange reactions is submitted. On the basis of obtained equations the necessary times of mechanical activation for complete course of mechanochemical reactions are designed. Kinetics of solid phase mechanosynthesis of nano TlCl by dilution of initial (2NaCl+$Tl_2SO_4$) mixture with the exchange reaction product (diluent,$zNa_2SO_4$, z=z*=11.25) was studied experimentally. Some peculiar features of the reaction mechanism were found. Parameters of the kinetic curve of nano TlCl obtained experimentally were compared with those for the model reaction KBr+TlCl+zKCl=(z+1) KCl+TlBr (z=z1*=13.5), and for the first time the value of mass transfer coefficient in a mechanochemical reactor with mobile milling balls was evaluated. Dynamics of the size change was followed for nanoparticle reaction product as a function of mechanical activation time.

• Journal of Ginseng Research
• /
• 제5권2호
• /
• pp.122-131
• /
• 1981

An aqueous extract s of fresh ginseng roots was heated at loot for 64 hrs. and the changes of color intensity, pH and the amount of free sugars and amino acids during the various intervals of the heating time were investigated. Color intensity and absorbance of the solution at 490nm were increased in proportion to the length of the heating time. Most of brown pigments produced during the treatment were water soluble, and pH 5.1 at initial stage of the solution, was slightly decreased at the final stages of the reaction. Sucrose, glucose and fructose were major free sugars in ginseng roots, and the amounts of sucrose was over 90 % of total free sugars. Sucrose. was largely decreased approximately 50%, by 64 hrs of the treatment, whereas sharp increase in the amount of glucose and fructose was observed during the reaction in the solution. The observed increase in reducing sugars, glucose and fructose was presumed due to hydrolysis of sucrose. Evidently, glucose and fructose were not important factor to control the browning reaction of the solution. Most of free amino acids and peptides except alanine and isoleucine especially arginine, serine and threonine, were sharply decreased up to 40 : 50% of the original concentration within 2 hrs. Accordingly, the content of free amino acids and peptides seems to be extremely important factor to control the browning reaction in ginseng. A free amino acid, presumed to be nor-leucine, was found in fresh ginseng root on the basis of re mention on liquid chromatography. Kinetic analysis of the browning reaction indicated a pseudo second order with respect to amino acid concentration at the initial stage.

• 공업화학
• /
• 제20권5호
• /
• pp.532-535
• /
• 2009

본 연구에서는 식물성 오일의 에스테르화 반응에 초음파에너지를 도입하여 지방산 methyl ester를 제조하였다. 초음파 에너지가 에스테르화 반응에 도입될 경우 반응온도의 가열효과뿐만 아니라 교반효과를 동시에 가져올 수 있어 반응시간 단축 및 지방산 methyl ester 수율의 증가를 가져올 수 있다. 그러나 초음파에너지가 에스테르화 반응에 도입될 때 연속적인 초음파에너지의 조사로 인한 반응온도의 계속적인 상승이 문제점으로 확인되었다. 따라서 본 연구에서는 cooling system을 이용하여 반응온도의 상승을 억제하여 실험을 수행한 결과 기존공정보다 빠른 30 min 만에 93%의 지방산 methyl ester 수율을 확인하였다.

• 공업화학
• /
• 제27권5호
• /
• pp.508-511
• /
• 2016

재활용이 가능한 자원인 MFB를 출발 물질로 하여 AMCA의 합성을 진행하였으며, AMBA로부터 AMCA로의 최적의 상업화 합성 조건을 찾고자 촉매, 수소 압력, 반응 온도, 반응 시간 같은 공정 변수를 조사하였다. 최적의 조건은 촉매는 [5% Pd/C : 5% Pt/C : 5% Rh/C (1 : 1 : 1)]의 복합 촉매를 반응 시간은 8 h, 반응 온도는 $130^{\circ}C$, 압력은 30 bar일 때(수율 90%, 순도 99.9%)임을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.405-406
• /
• 2005

A theoretical investigation of the solid-phase mechanochemical synthesis of nano-sized target product on the basis of dilution of the initial powdered reagent mixture by another product of an exchange reaction is presented. On the basis of the proposed 3-mode particle size distribution in mechanically activated mixture, optimal molar ratios of the components in mixture are calculated, providing the occurrence of impact-friction contacts of reagent particles and excluding aggregation of the nanosized particles of the target reaction product. Derivation of kinetic equations for mechanochemical synthesis of nanoscale particles by the final product dilution method in the systems of exchange reactions is submitted. On the basis of obtained equations the necessary times of mechanical activation for complete course of mechanochemical reactions are designed. Kinetics of solid phase mechanosynthesis of nano-TlCl by dilution of initial (2NaCl + $Tl_2SO_4$) mixture with the exchange reaction product (diluent, $zNa_2SO_4$, $z=z^*=11.25$) was studied experimentally. Some peculiar features of the reaction mechanism were found. Parameters of the kinetic curve of nano-TlCl obtained experimentally were compared with those for the model reaction KBr + TlCl + zKCl = (z + 1) KCl + TlBr ($z=z_l^*=13.5$), and for the first time the value of mass transfer coefficient in a mechanochemical reactor with mobile milling balls was evaluated. Dynamics of the size change was followed for nanoparticle reaction product as a function of mechanical activation time.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.267-273
• /
• 2018

Hydrothermal liquefaction of Chlorella vulgaris feedstock containing 80% (w/w) water was conducted in a batch reactor as a function of temperature (300, 325 and $350^{\circ}C$) and reaction times (5, 10 and 30 min). The biocrude yield, elemental composition and higher heating value obtained for various reaction conditions helped to predict the optimum conditions for maximizing energy recovery. To optimize the recovery of inorganic nutrients, we further investigated the effect of reaction conditions on the ammonium ($NH_4{^+}$), phosphate ($PO_4{^{3-}}$), nitrate ($NO_3{^-}$) and nitrite ($NO_2{^-}$) concentrations in the aqueous phase. A maximum energy recovery of 78% was obtained at $350^{\circ}C$ and 5 min, with a high energy density of 34.3 MJ/kg and lower contents of oxygen. For the recovery of inorganic nutrients, shorter reaction times achieved higher phosphorus recovery, with maximum recovery being 53% at $350^{\circ}C$ and 5 min. Our results indicate that the reaction condition of $350^{\circ}C$ for 5 min was optimal for maximizing energy recovery with improved quality, at the same time achieving a high phosphorus recovery.