• 한국잠사곤충학회지
• /
• 제41권2호
• /
• pp.116-121
• /
• 1999

This study was aimed to explain the essence of Hydroxylammonium hydrochloride(H.A.) effect on degummed silk fiber increasing the colour sites due to oxime generating reaction. H.A. in aqueous solution caues to increase the amount of [H+] and reduce pH values as the concentration of H.A. increases. The rate of [H+] absorption of silk fiker in acidic solution differs on the basic of solution pH and shows a specific uptake in each pH, the lower the pH of solution, the higher the amount [H+] absorption. The pH of solution after treating of silk fiber in H.A. and HCl, showed more remaining [H+] in H.A. solution due to [H+] releasing under the procedure of oxime production. Also it was revealed that in higher concentration of H.A. the reaction for oxime fixation in silk fiber carried out stonger and as a result the bigger gap with acid uptake curve appeared. FT-IR analysis of silk fiber treated with H.A. revealed the creating of intermolecular H-bond at the 2,981-2.930 cm-1, which was not appeared for nontraeted silk fibers and shows H-bond between N-OH group in oue chain and C=) group in another chain of silk protein. Colourimetry of dyed silk fiber after H.A. tratment showed that the silk fiber treated with the high concentration of H.A. compare to low concentration, absorbed more dyeing molecules and so Showed less percontage of Whiteness.

• 한국환경과학회지
• /
• 제17권7호
• /
• pp.801-808
• /
• 2008

This study was investigated experimental condition which is able to evaluate photocatalytic activity of various commercial $TiO_2$. The experiments were performed for three representative substances (ethanol, phenol and methylene blue) and four kinds of commercial $TiO_2$, under the experimental conditions such as pH, reactant concentration, amount of $TiO_2$, reaction time and UV intensity. The optimum experimental conditions to evaluate photocatalytic activity were as follows : for ethanol, the initial concentration 1000 ppm, initial pH 8, $TiO_2$ loadings 0.1 wt%, and reaction time 90 minutes: for phenol, the initial concentration 200 ppm, initial pH 8, $TiO_2$ loadings 1 wt%, and reaction time 60 minutes: for methylene blue, the initial concentration 200 ppm, initial pH 4, $TiO_2$ loadings 0.5 wt%, and reaction time 30 minutes.

• 한국분말재료학회지
• /
• 제15권2호
• /
• pp.148-155
• /
• 2008

Nano magnetite particles have been prepared by two step reaction consisting of urea hydrolysis and ammonia addition at certain ranges of pH. Three different concentrations of aqueous solution of ferric ($Fe^{3+}$) and ferrous ($Fe^{2+}$) chloride (0.3 M-0.6 M, and 0.9 M) were mixed with 4 M urea solution and heated to induce the urea hydrolysis. Upon reaching at a certain pre-determined pH (around 4.7), 1 M ammonia solution were poured into the heated reaction vessels. In order to understand the relationship between the concentration of the starting solution and the final size of magnetite, in-situ pH measurements and quenching experiments were simultaneous conducted. The changes in the concentration of starting solution resulted in the difference of the threshold time for pH uprise, from I hour to 3 hours, during which the akaganeite (${\beta}$-FeOOH) particles nucleated and grew. Through the quenching experiment, it was confirmed that controlling the size of ${\beta}$-FeOOH and the attaining a proper driving force for the reaction of ${\beta}$-FeOOH and $Fe^{2+}$ ion to give $Fe_3O_4$ are important process variables for the synthesis of uniform magnetite nanoparticles.

• 한국식품과학회지
• /
• 제28권2호
• /
• pp.212-219
• /
• 1996

Maillard 반응중 피질의 변화를 4차원 반응표면으로 나타내어 기질의 동적변화를 모니터링하고자 하였다. Total amino acids의 함량변화에 대한 회귀분석 결과 높은 $R^2$ (0.9470)를 나타내었으며, 각각의 amino acid또한 높은 R'를 나타내어 대부분 유의성이 인정되었다. 유리당의 함량에 대한 회귀분석에서 glucose의 함량에 대한 R'는 0.9250이었으나 fructose에 대한 $R^2$는 0.6490으로 낮은 값을 보였다. Maillard반응중 total amino acids의 함량은 반응온도가 높고 용매의 pH값 이 증가할수록 크게 감소되었다. 반응생성물의 갈색도는 반응온도가 증가할수록 증가하나 145‘C 내외에서 최대값을 나타내었다. 각각의 amino acid함량변화는 total amino acids 함량인화와 유사한 경향이었으며, 4차원 반응표면분석 결과 aspartic acid, threonine, glucose등의 기질들은 복합기질계 Maillard반응에 있어서 특이하게 반응온도가 증가할수록 크게 감소한 반면, 용매의 pH와 반응시간의 영향은 거의 받지 않는 것으로 나타났다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.103-106
• /
• 2001

A remediation technology consisting of biodegradation and a modified Fenton reaction was developed to degrade mixtures of polycyclic aromatic hydrocarbons (PAHs) at a former manufactured gas plant (MGP) site. The original Fenton reaction (i.e., $H_2O$$_2$ + Fe$^{2+}$) was modified to be biocompatible by using ferric ions and chelating agents such as catechol and gallic acid. The modified reaction was effective in degrading PAHs at near neutral pH and thus was compatible with biodegradation. By the combined treatment of the modified Fenton reaction and biodegradation, more than 98% of 2- or 3-ring hydrocarbons and between 70 and 85% of 4- or 5-ring compounds were degraded in the MGP soil, while maintaining its pH about 6.6.

• 한국환경과학회지
• /
• 제17권1호
• /
• pp.37-44
• /
• 2008

The electro-chemical decolorization of Rhodamine B (RhB) in water has been carried out by electro Fenton-like process. The effect of distance, material and shape of electrode, NaCl concentration, current, electric power, $H_2O_2$ and pH have been studied. The results obtained that decrease of RhB concentration of Fe(+)-Fe(-) electrode system was higher than that of other electrode system. The decrease of RhB concentration was not affected electrode distance and shape. Decolorization of electro Fenton-like reaction, which was added $H_2O_2$ onto the electrolysis using electrode was higher than electrolysis. Addition of NaCl decreased the electric consumption. The lower pH is, the faster initial reaction rate and reaction termination time observed.

• Food Science and Biotechnology
• /
• 제18권6호
• /
• pp.1495-1499
• /
• 2009

The volatiles formed from the reactions of L-ascorbic acid with L-alanine at 5 different pH (5, 6, 7, 8, or 9) and $140{\pm}2^{\circ}C$ for 2 hr was performed using solid-phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS) analysis were identified to be 25 different kinds. The reaction between L-ascorbic acid and L-alanine led mainly to the formation of pyrazines. Many of these were alkylpyrazines, such as 3-ethyl-2,5-dimethylpyrazine, 2,5-dimethylpyrazine, 2-ethyl-5-methylpyrazine, 3,5-diethyl-2-methylpyrazine, methylpyrazine, 2-ethyl-6-methylpyrazine, and 2,3-diethyl-5-methylpyrazine, other compounds identified were furans, phenols, benzoquinones, 2,4,6-trimethylpyridine, and 2-methylbenzoxazole. The studies showed that furans, such as furfural and benzofuran were formed mainly at acidic pH. In contrast, higher pH values could promote the production of pyrazines.

• 한국광물학회지
• /
• 제26권4호
• /
• pp.273-283
• /
• 2013

탄산염질 암석으로 건조된 석조문화재의 산성비에 따른 손상을 예측하기 위하여 백운암질 대리암 시편에 pH 4.0, pH 5.6 및 pH 6.85 인공강우와 인공풍화시험을 적용하였다. 모든 산성도의 강우는 대리암과 반응 후 중성부근으로 변화하였다. 대리암과 반응한 후 모든 산성도의 강우에서 $Ca^{2+}$과 $Mg^{2+}$의 함량이 두 배 이상 증가하였으며 탈이온수에서의 이온함량도 산성수에서와 유사하다. pH 4.0 강우와 반응한 대리암 시편의 무게가 시험 매회 $0.00037kg/m^2$ 감소할 것으로 예측되며, 이는 한계산성비 pH 5.6에 비해 약 1.4배, 중성강우에 비해 약 3.1배, 그리고 인공풍화시험만 거친 시편에 비해서는 3.7배 큰 값이다. 일축압축강도는 pH 4.0 강우에서 시험 매회 $0.2468kg/m^2$가 감소되며 강우에 접하지 않았을 때보다 2배 크다. pH 5.6과 pH 6.85 강우에서는 강도감소율이 각각 0.1791, $0.1280kg/m^2$로 도출되어 강우의 산성도가 강할수록 대리암의 강도는 약화됨이 예측되었다. 강우에 의해 대리암으로부터 이탈된 광물은 백운석과 소량의 방해석이다.

• Journal of Microbiology and Biotechnology
• /
• 제32권5호
• /
• pp.672-679
• /
• 2022

Microbial lipases are used widely in the synthesis of various compounds due to their substrate specificity and position specificity. 4-Ethyl malate (4-EM) made from diethyl malate (DEM) is an important starting material used to make argon fluoride (ArF) photoresist. We tested several microbial lipases and found that Photobacterium lipolyticum M37 lipase position-specifically hydrolyzed DEM to produce 4-EM. We purified the reaction product through silica gel chromatography and confirmed that it was 4-EM through nuclear magnetic resonance analysis. To mass-produce 4-EM, DEM hydrolysis reaction was performed using an enzyme reactor system that could automatically control the temperature and pH. Effects of temperature and pH on the reaction process were investigated. As a result, 50℃ and pH 4.0 were confirmed as optimal reaction conditions, meaning that M37 was specifically an acid lipase. When the substrate concentration was increased to 6% corresponding to 0.32 M, the reaction yield reached almost 100%. When the substrate concentration was further increased to 12%, the reaction yield was 81%. This enzyme reactor system and position-specific M37 lipase can be used to mass-produce 4-EM, which is required to synthesize ArF photoresist.

• 한국환경과학회지
• /
• 제15권11호
• /
• pp.1061-1067
• /
• 2006

Photodegradation of endosulfan alpha, beta, and sulfate known as the most toxic substance among organochlorine pesticides by UV irradiation was studied at experimental conditions such as different pH aqueous solution and reaction time. The initial concentration of endosulfan alpha, beta, and sulfate in aqueous solution was 500 ppb, respectively. The experiment of photodegradation was conducted in a quartz reactor equipped with a low pressure mercury lamp (100 W, 240 nm). The samples were withdrawn from the photo reactor at intervals of 0, 10 min, 30 min, 1 hr, 2 hr, and 4 hr. Endosulfan sulfate was never hydrolyzed and photodegraded in wide range of pH. At pH 5 and reaction time (240 min), endosulfan alpha was photodegraded up to 67%. Both endosulfan alpha and beta were started to photodegrade at pH 6.5 with the lapse of time, resulting in approximately 99.9% and 87.2% of photodegradation efficiency, respectively. Furthermore, at pH 9, endosulfan alpha and beta was partially hydrolyzed and photodegraded to 99.5% at 120 min of reaction time. During the photolysis, any photo-products of endosulfan alpha, beta, and sulfate were not observed.