• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.365-370
• /
• 2003

The phase development process of $Ba_2$ $Ti_{9}$ $O_{20}$ ceramics is not clearly known and frequently accompanies second phases which deteriorate dielectric properties. In synthesizing $Ba_2$ $Ti_{9}$ $O_{20}$ ceramics, in order to trace the reaction sequence during conventional solid-state reaction in BaO-Ti $O_2$ system, different barium sources of BaC0$_3$ and BaTi0$_3$ precursor were used as starting materials. From the analysis of XRD patterns, different secondary phases could be identified depending on the barium source used, which might mean that the equilibrium phases in BaO-Ti $O_2$ system are very difficult to be synthesized. Because the BaTi0$_3$ precursor provides short diffusion paths of ions, the system revealed less secondary phases during solid state reaction. In synthesizing BaO-xSm$_2$0$_3$-4.5Ti0$_2$ system using different barium sources, different secondary phases were developed also. Microstructure and dielectric properties were examined and discussed in terms of secondary phase development.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.100-105
• /
• 1992

A mathematical model is developed for a CSTR in which free radical solution polymerization of methyl methacrylate(MMA) takes place. It turns out that five ordinary differential equations are to be treated simultaneously in order to predict the reactor performance. Although the reaction proceeds under the conditions of relatively low temperature and pressure, the system shows very complex bifurcation features due to the diffusion limitation (gel effect) and the temperature dependence of the kinetic parameters and physical properties. The effects of various system parameters on the reactor performance as well as on the polymer properties are investigated by using the bifurcation analysis. The application of the singularity theory enables us to divide the parameter space into several different regions, in each of which the system takes a unique steady state structure. Under certain circumstances, complex dynamic features such as HB points and limit cycles are observed and these should be taken into consideration in the reactor design.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.476-479
• /
• 2000

In this study, mesh-type PECVD system was suggested to minimize the hydrogen concentration. The main structural difference between the triode system and a conventional system is that a mesh was attached to the substrate holding electrode. We investigated several conditions to compare with conventional PECVD. The main effect of mesh was to minimize the substrate damage by ion bombardment and to enhance the surface reaction to induce hydrogen desorption. It was also found that hydrogen concentration decreased but deposition rate increased as increasing applied dias. Applied DC bias enhanced sputtering process. Intense ion bombardment causes the weakly bonded hydrogen or hydrogen-containing species to leave the growing film and increased adatom mobility. Furthermore, addition of hydrogen gas enhance the surface diffusion of adatom. The structural properties of poly-Si films were analyzed by scanning electron microscopy(SEM).

• Journal of Electrochemical Science and Technology
• /
• 제6권3호
• /
• pp.75-80
• /
• 2015

We introduce a new synthesis method to prepare small TiO₂ nanoparticles with a narrow particle size distribution, which is achieved by electron beam (E-beam) irradiation. The effects of E-beam irradiation on the synthesis of TiO₂ nanoparticles and the electrochemical performance of TiO₂ nanoparticles as alternative anode materials for Li-ion batteries are investigated. The TiO₂ nanoparticles induced by E-beam irradiation present better cycling performance and rate capability than the TiO₂ nanoparticles synthesized by normal hydrolysis reaction. The better electrochemical performance is attributed to small particle size and narrow particle size distribution, resulting in the large surface area that provides innumerable reaction sites and short diffusion length for Li⁺ through TiO₂ nanoparticles.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.889-893
• /
• 2002

The reactions of $Cu/Ti/SiO_2$ structures at temperatures ranging from 200 to $700^{\circ}C$ have been studied for various Ti thicknesses. The reaction products initially formed, at around $300^{\circ}C$, were a series of Cu-Ti intermetallics ($Cu_3$Ti/CuTi) with the oxygen dissolved in the Ti moving from the compounds into the remaining unreacted Ti. At $500^{\circ}C$, the $Cu_3$Ti was converted into Cu-rich intermetallics, $Cu_4$Ti, which grew at the expense of the CuTi due to the increased oxygen content in the Ti. In addition, the outdiffusion of Ti, to the Cu surface, and the $Ti-SiO_2$ reactions, caused an abrupt increase in the oxygen content in the Ti layer, which placed thermodynamic restraints on further Ti reactions. Furthermore, thinner Ti layers showed a higher increasing rate of oxygen accumulation for the same consumption of Ti, which led to significantly reduced Ti consumption. The $SiO_2$ film under the Ti diffusion barrier was more easily destroyed with increasing Ti thickness.

• Journal of Electrochemical Science and Technology
• /
• 제14권1호
• /
• pp.31-37
• /
• 2023

Owing to the rapid climate change, a high-performance energy storage system (ESS) for efficient energy consumption has been receiving considerable attention. ESS, such as capacitors, usually has issues with the ion diffusion of electrode materials, resulting in a decrease in their capacitance. Notably, appropriate pore diameter and large specific surface area (SSA) may result in an effective ion diffusion. Therefore, graphene and multi-walled carbon nanotube (graphene@MWCNT) hybrid nanomaterials, with covalent bonds between the graphene and MWCNT, were prepared via an edge-chemistry reaction. The properties of these materials, such as high porosity, large SSA, and high electroconductivity, make them suitable to be used as electrode materials for capacitors. The optimal ratio of graphene to MWCNT can affect the electrochemical performance of the electrode material based on its physical and electrochemical properties. The supercapacitor using optimal graphene-based hybrid electrode material exhibited highest specific capacitance value as 158 F/g and excellent cycle stability.

• 산업기술연구
• /
• 제20권A호
• /
• pp.73-82
• /
• 2000

This study was implemented to find an optimal model for wastewater treatment processes using PHOENICS(Parabolic, hyperbolic or Elliptic Numerical Integration Code Series) and ASM(Activated Sludge Model). PHOENICS is a general software based upon the laws of physics and chemistry which govern the motion of fluids, the stresses and strains in solids, heat flow, diffusion, and chemical reaction. The wastewater flow and removal efficiency of particle in two phase system of a grit chamber in wastewater treatment plant were analyzed to inquire the predictive aspect of the operational model. ASM was developed for a biokinetic model based upon material balance in complex activated sludge systems, which can demonstrate dynamic and spatial behavior of biological treatment system. This model was applied to aeration tank and settling chamber in Choonchun city, and the modeling result shows dynamic transport in aeration tank. PHOENCS and ASM could be contributed for the optimal operation of wastewater treatment plant.

• 한국진공학회지
• /
• 제6권2호
• /
• pp.143-150
• /
• 1997

본 연구에서는 1000$\AA$두께의 Molybdenum화합물(Mo, Mo-N,$MoSi_2$, Mo-Si-N)의 Cu에 대한 확산방지막으로서의 특성을 면저항측정장비(four-point-probe), XRD, XPS, SEM, RBS 분석을 통하여 조사하였다. 각 박막층은 dc magnetron sputtering장비를 이용하 여 증착되었고 $300^{\circ}C$-$800^{\circ}C$의 온도구간에서 30분동안 진공열처리하였다. Mo 및 $MoSi_2$ 방지 막은 낮은 온도에서 확산방지막으로서의 특성파괴를 보였다. 결정립계를 통한 Cu의 확산과 Mo-실리사이드내의 Si의 Cu와의 반응이 그 원인인 것으로 사료된다. 질소를 첨가한 시편의 경우 확산방지특성 파괴온도는 Mo-N방지막의 경우 $650^{\circ}C$-30분, Mo-Si-N방지막의 경우 $700^{\circ}C$-30분으로 향상되었다. Cu와 Si의 확산은 방지막의 결정립계를 통하여 더욱 빠르게 확 산된다. 따라서 증착시 결정립계를 질소와 같은 물질로 채워 Cu와 Si의 확산을 저지할 수 있을 것으로 사료된다. 본 실험결과에서의 질소첨가는 이와 같은 stuffing 효과외에도 Mo- 실리사이드 박막의 결정화 온도를 다소 높인 것으로 나타났고, 그 결과 결정립계의 밀도를 감소시켜 확산방지막으로서의 특성을 향상시킨 것으로 사료된다. 또한 질소첨가는 실리사이 드내의 금속과 실리콘과의 비를 변화시켜 확산방지막의 특성에 영향을 미친 것으로 보인다. 본 실험에서 조사된 확산방지막 중에서는 Mo-Si-N박막이 Cu와 Si간의 확산을 가장 효과적 으로 저지시킨 것으로 나타났으며 $650^{\circ}C$-30분까지 안정한 특성을 보였다.

• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.1021-1026
• /
• 2012

단일 액적 시스템에서의 비정상상태 물질 전달에 대한 연구를 진행하였다. 단일 액적계를 위한 이성분계로는 옥탄올(연속상)-물(분산상) 시스템이 이용되었으며 동반되는 불균일 반응으로는 아민추출제(tri-n-octylamine,TOA)를 이용한 숙신산 추출 반응을 모델 시스템으로 선정하였다. 점도, 밀도, 용질의 분배계수, 연속상에서 하강하는 액적의 종말 속도, 용질과 추출제의 확산계수 등과 같은 시스템의 기본 특성을 파악하기 위한 실험과 이론적 계산들이 수행되었다. 액적의 종말 속도는 숙신산 농도에는 크게 영향을 받지 않는 것으로 보이나 TOA가 없을 때는 숙신산 농도에 따라 약간 증가하는 경향을 보였고, TOA 농도 증가와 함께 감소하였다. 액적의 낙하는 수직 낙하 경로를 기준으로 좌우로 진동하면서 움직이는 경향을 보였다. 낙하하는 액적에서의 물질 전달 관찰을 위해 물질 전달 셀을 제작하여 시간에 따른 액적 내의 평균 농도 변화를 관찰하였고, 그 결과를 무차원 변수를 이용하여 해석하였다. 50 g/L의 숙신산 농도 조건하에서 TOA 농도를 0.1과 0.5 mol/kg 으로 조절하였을 때, 전자의 경우에는 관찰 시간 범위 내에서 일정한 Sh 값을 유지하여 용질의 이동 방향으로의 농도 기울기가 감소함에 따라 훌럭스도 그에 비례하여 감소함을 알 수 있었지만, 후자의 경우에는 시간의 경과와 함께 Sh가 급격히 증가하는 현상을 보여 계면에서의 숙신산 훌럭스 감소에 비해 농도기울기 감소가 상대적으로 빠르게 일어남을 알 수 있다.

• 조명전기설비학회논문지
• /
• 제20권2호
• /
• pp.45-49
• /
• 2006

본 논문은 마이크로 전극 시스템에 의하여 연료전지 및 Ni-MH 전지로의 응용을 가정한 $AB_5$계 수소저장합금인 $MmNi_{3.55}Co_{0.75}Mn_{0.4}Al_{0.3}$의 단일 입자에 대하여 전기화학적인 평가를 수행하였다. 즉 Carbon fiber 마이크로 전극을 합금 입자 한개 위에 전기적인 접촉을 이루도록 조정하고, 합금 입자 내에서 수소원자의 겉보기 화학적 확산계수를 계산하기 위하여 Potential-Step 실험을 실시하였다. 여기에서 사용되는 합금입자는 치밀하고 전도성이 있는 구형이므로 데이터 해석을 위해 구형확산 모델을 적용하였다. 실험결과로서 겉보기 확산계수($D_{app}$)는 수소 흡장 및 방출되는 전 과정에서 $10^{-9}$과 $10^{-10}[cm^2/s]$ 수준인 것으로 확인되었다. 마이크로 전극 측정 시스템에 의한 단일 입자의 전기화학적 평가는 기존의 Composite Film 전극에 비해 수소저장합금에 대해 보다 상세하고 정확한 정보를 쉽게 얻을 수 있었다.