• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2739-2746
• /
• 2011

This paper proposes the method for more effectively calculating X/R which is the ratio of equivalent reactance(X) and resistance(R) of the bulk power system and analyses the characteristic of X/R values by applying the proposed method to the real bulk power systems. X/R is used to determine the rating of the relay in the bulk power systems and its value has been accepted to be big enough to ignore the equivalent resistance of the bulk power systems. However, X/R is calculated as a big number when only the upper transformer and transmission line are considered. The correct approach to calculating X/R needs to consider all the parameters including generators, transformers, lines and loads. This paper calculates X/R of the bulk power systems using dynamic models which have been used to analyse the power system stability. The effectiveness of the proposed method is verified by applying it to the test system and X/R values of the real bulk power systems are analyzed. In addition, the dependence of X/R on the closeness of its calculating locations to the generator is verified by using the marginal loss factor which has been used in the electricity market.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.602-612
• /
• 2013

In this paper, a design and fabrication of miniaturized 5.3 GHz reflection type $360^{\circ}$ analog phase shifter with branch line coupler and $360^{\circ}$ variable reactance load. In order to miniaturize phase shifter, novel branch line coupler is proposed. The novel branch line coupler is miniaturized using transformation of transmission line to T and ${\pi}$ type equivalent circuit. The miniaturized branch line coupler has small size of above 50 % compared with conventional branch line coupler. For wide phase shift range, $360^{\circ}$ variable reactance load structure is adopted. Especially, the structure was improved for linear phase shift by adding transmission line which acts as an impedance transformer. The improved structure was miniaturized using the equivalent lumped-element of transmission line. The fabricated phase shifter with $15{\times}15mm^2$ shows wide phase shift of above $480^{\circ}$, the insertion loss of -4~-6 dB and the reflection loss of below -20 dB at 5.3 GHz under 0~10 V control voltage range.

• Management & Information Systems Review
• /
• v.34 no.3
• /
• pp.215-230
• /
• 2015

This study defined the types of barrier and conducted the impact of barrier in adventurous sports. There are many research on adventurous sports, but these researches have several limitations. First, these studies have overlooked important role of barrier in adventurous sports. Also, previous studies on barriers haven't showed the moderating effects of personality on barriers. So, this study attempts to complement the lack of existing research and this purposes of the study is as follows. First, it is to show the positive impacts of barriers on absorbing experience that had been overlooked in the previous researches. Second, it is to propose the moderating effects of personality-arousal seeking, reactance tendency- on the relationship between barriers and absorbing experience. Survey research is employed to test these hypotheses. Previous researches, such as marketing, adventure sports, hedonic research, have been referenced to measure constructs. We collected data involving various adventure sports, and used 171 respondents to analyze these data using moderating regression. In the final section, we discussed several limitations of our study and suggested directions for future research. We concluded with a discussion of managerial implications, including the potential to advance understanding adventure sports and implying an enhanced ability to satisfy target consumers of it.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.5
• /
• pp.25-31
• /
• 2014

Bioelectrical Impedance Analysis(BIA) is a widely used method for estimating body composition changes which is a non-invasive, inexpensive, safety and reproductive method. We studied the bioimpedance change and the distinction of blood pressure according to body posture and conducted three kinds of experiments: the real-time bioimpedance measurement, the simulation using equivalent circuit model and the blood pressure measurement. Bioimpedance is measured during 4 minutes at the multi-frequency(1 kHz, 10 kHz, 20 kHz, 50 kHz, 70 kHz, 100 kHz). From the experiment results, the changes in body postures result in changes of resistance and reactance, with an average rapid increase of body impedance when going from standing, sitting to supine. Specially, the laying resistance on average was 16.49% higher than supine resistance at 50 kHz and the laying reactance measurement was also 26.05% higher than sitting reactance at 1 kHz. Blood pressure in standing posture was higher than those in other postures both in maximum($125.14{\pm}12.30$) and in minimum($75.57{\pm}10.31$). The results of BIA and blood pressure in this study will be contributed to the research on acute illness, extreme fat, and body shape abnormalities.

• Proceedings of the KIEE Conference
• /
• 1979.08a
• /
• pp.142-146
• /
• 1979

전력용(電力用) 병렬(竝列) 콘덴서는 변전소(變電所)에서 설치되어 계통(系統)의 전압조정 및 역률개선에 사용되어 왔으며 콘덴서의 원-용(元-用) 범위를 송전전선(送電電線)의 직렬(直列)보상에까지 활용하게 되어 선로의 운용도(云誘導) reactance를 보상함으로서 등가적으로 선로의 길리을 단축시키게 되어 장거리, UHV 손전선(送電線) 및 배전선(配電線)에 채용(採用)되고 있다. 본(本) 연구는 각국에서 채용되고 있는 직렬(直列)콘덴서 보상방식을 우리나라의 모델 선로에 적용시켰을 경우에 대한 전압(電壓), 전류(電流) 전력(電力) 및 전력손실(電力損失) 등의 제특성에 대하여 고찰한 결과이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.454-457
• /
• 1997

As in most industrial processes, the dynamic characteristics of an electric power system are subject to changes. Amongst those effects which cause the system to be uncertain, faults on transmission lines are considered. For the stabilization of the power system, we present an indirect adaptive control method, which is capable of tracking a sudden change in the effective reactance of a transmission line. As the plant dynamics are nonlinear, an input-output feedback linearization method equipped with nonlinear damping terms is combined with an identification algorithm which estimates the effect of a fault. The stability of the resulting adaptive nonlinear system is investigated.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.267-270
• /
• 2000

The feasibility of small linear antenna for near range wireless communications was studied. The requirement of the system are frequency range 9∼12 MHz and antenna size 15 cm. The communication range is about 15 m. The antenna input impedance is very small radiation resistance and very large capacitive reactance. The lossless impedance matching is nearly impossible, therefore lossy matching is considered. The antenna has very low radiation efficiency. The near field calculation has a large uncertainty, but the results can be used as the guideline of a small linear antenna system for a near range wireless communication.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.61-66
• /
• 2001

In this research, the design parameters of embedded capacitors are extracted by modeling and fabrication. The traditional library of capactor has a few problems in applying the circuit. Its capacitance is discrete, so target values in any circuit often can't be obtained in library, To solve this problem, the characteristics of capacitors are detected in the variation with the shape and structure, and then the capacitors with the expected reactance value at target frequency are obtained, In this procedure, 3-dimensional structure simulation is performed to predict the characteiristics of capacitors.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.12
• /
• pp.586-593
• /
• 1986

Ringing during the scan time deteriorates the picture quality of television receiver. By tuning the stray reactance of the flyback transformer(FBT)to harmonics of the retrace pulse, the ringing can be suppressed and this is, what is called, the harmonic tuning methed. But finding the conditions for the ringing to cease in lossy FBT and satisfying these conditions at design stage require much time and experience. In this paper, the conditions for the ringing to cease in loss-included equivalent circuit are derived and a new method, unharmonic-tuning method, is suggested.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.109-112
• /
• 1996

In this paper, we composed utility interactive photovoltaic generation system of current source inverter, and controlled that low harmonic and high power factor are hold by supposing control and compensation method which is concerned with synchronous signal distortion and modulation delay. And we put parallel resonant circuit into dc link, so, magnitude of direct reactance was reduce by restraining direct current pulsation which had accumulation of pulsating power in alternating electrolytic condenser. Also we controlled that modulation factor is operated around maximum output of solar cell.