• Journal of the Korean Institute of Gas
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2021

The re-liquefaction drum is a product that installed spray nozzles at the top to directly spray overcooled LNG into evaporative gas and installed demistors to facilitate gas separation, which was developed to increase the re-liquidity efficiency of small scale re-liquefaction facilities. In the hydrostatic test of the drum, no leakage occurred even at a pressure of 1.5 times the design pressure, but during the BOR(Boil Off Rate) test, the bolt loosening occurred due to contraction and expansion by temperature change. For the continued use of the product, insulation construction on flange connections was developed to enable detachment and attachment, and the comparison of heat load with existing insulation confirmed that it was very small compared to the inlet flow rate in the drum.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.33-38
• /
• 2001

Bifurcation of unstable symmetric flow patterns to stable asymmetric ones in laminar sudden-expansion flow has been numerically investigated. Computations were carried out for an expansion ratio of 3 and over a range of the flow Reynolds numbers by using numerical methods of second-order time accuracy and a fractional-step method that guarantees divergence-free flowfields at all times. The critical Reynolds number above which bifurcation of pitchfork type to asymmetric flow pattern takes place is lower in a flow with a higher expansion ratio, in agreement with the previously reported results. The bifurcation diagrams show that the bifurcation takes place at a Reynolds number, $Re_c = 86.3$, higher than the value that has been reported. The lower critical Reynolds number may be due to deficiencies in their computations which employed SIMPLE-type relaxation methods rather than the initial-value approach of the present study. Characteristics of the flow development during the transition to asymmetric stable flow have been investigated by using spectral analysis of the velocity signals obtained by the simulations.

• Journal of Chest Surgery
• /
• v.22 no.2
• /
• pp.321-324
• /
• 1989

The Swyer-James syndrome is rare abnormality that may be encountered on routine chest X * ray examination and frequently presents a diagnostic problem. Recently, we experienced a case of Swyer-James syndrome which was accompanied with ipsilateral uncontrolled pneumothorax. We performed exploratory thoracotomy because of failure of re-expansion of the lung. Right pneumonectomy was performed and postoperative course was uneventful.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.2
• /
• pp.96-105
• /
• 2001

R410a which is one of HFC refrigerants is being considered to be a promising replacement for R22 widely used in domestic air conditioners. The rolling piston type rotary compressors for R410a have lower energy efficiency than those for R22 because of the high pressure difference between a suction chamber and a discharge chamber in the compression mechanism. in addition, the re-expansion gas loss of the rotary compressor for R410a which occurs a ta clearance volume in a discharge port becomes larger than that for R22 due to high density of R410a refrigerant. Therefore, Pressure-Volume analyses for various design parameters of a discharge system were carried out to improve efficiency of a R410a rotary compressor. The results such as performance dta, over-compression loss, and re-expansion loss were acquired by P-V analyses and analyzed quantitatively. As a conclusion, the optimal specifications of several design parameters of a discharge system were obtained by analyzing P-V diagrams.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.165-184
• /
• 2023

The purpose of this study is to analyze the expanded characteristics that can be found in the fashion designs of JUUN. J. For the study, the concept and discourse related to theme expansion have been theoretically reviewed, and various types of expansive characteristics were derived by reviewing prior research related to the keyword expanded characteristics. Photo data required for the analysis were collected through the official website of JUUN. J and Vogue, a worldwide fashion magazine. The scope of the survey was limited to 983 photographs collected from 28 collections from 2009 S/S through 2022 F/W. The results are as follows. First, the expansion of the human body, which is achieved by adding an empty space between the body and the clothing or using various materials to express the volume of the body, is expressed through two different forms in the designs of JUUN. J. Second, the expansion of time expresses the combination of different timelines, the meeting of the past and present or awe toward the unpredictable future. Third, the expansion of style, which is expressed by reinterpreting existing costumes or styles, is a type of expansion' that appears individually in the fashion designs of JUUN J. Such expansion of style can be found in the military inspired designs. Fourth, the expansion of space, which diversifies our perception of space by re-recognizing the concept of space, was implemented into the works and designs of JUUN. J through the convergence of different cultural aspects. Fifth, the expansion of gender, which is expressed through the continuous exploration of the borders of gender and the delivery of social messages, has appeared in the works of JUUN J. in the form of genderless design.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.60-60
• /
• 2021

Investigating Backward-Facing Step(BFS) flow is important in that it is a representative case for separation flows in various engineering flow systems. There have been a wide range of experimental, theoretical, and numerical studies to investigate the flow characteristics over BFS, such as flow separation, reattachment length and recirculation zone. However, most of such previous studies were concentrated only on the perpendicular step angle. In this study, several numerical investigations on the flow pattern over BFS with various step angles (10° ~ 90°) and expansion ratios (1.48, 2 and 3.27) under different Reynolds numbers (5000 ~ 64000) were carried out, mainly focused on the reattachment length. The numerical simulations were performed using an open source 3D CFD software, OpenFOAM, in which the velocity profiles and turbulence intensities are calculated by RANS (Reynolds Averaged Navier-Stokes equation) and 3D LES (Large Eddy Simulation) turbulence models. Overall, it shows a good agreement between simulations and the experimental data by Ruck and Makiola (1993). In comparison with the results obtained from RANS and 3D LES, it was shown that 3D LES model can capture much better and more details on the velocity profiles, turbulence intensities, and reattachment length behind the step for relatively low Reynolds number(Re < 11000) cases. However, the simulation results by both of RANS and 3D LES showed very good agreement with the experimental data for the high Reynolds number cases(Re > 11000). For Re > 11000, the reattachment length is no longer dependent on the Reynolds number, and it tends to be nearly constant for the step angles larger than 30°.) Based on the calibrated and validated numerical simulations, several additional numerical simulations were also conducted with higher Reynolds number and another expansion ratio which were not considered in the experiments by Ruck and Makiola (1993).

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.6
• /
• pp.125-141
• /
• 2020

This study focuses on the impact of service expansion for tax service customers and the change in customer's re-use intention, according to the degree of psychological ownership of internal employees when expanding differentiated service areas and the reinforcement of profits according to the representative's tendency. The effects of emphasis, cost emphasis, and double emphasis (revenue and cost dual emphasis) were analyzed. As a result of the study, it was possible to see the changes in the customer's re-use intention according to the psychological ownership of internal workers and satisfying users' customer satisfaction. In addition, it is meaningful to enable the tax agent to pursue a change in the direction of future-oriented service provision, and a new research direction was suggested in terms of the professionalism, quality, and service expansion of the tax agent.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.1
• /
• pp.64-77
• /
• 2009

A proxy re-encryption scheme allows Alice to temporarily delegate the decryption rights to Bob via a proxy. Alice gives the proxy a re-encryption key so that the proxy can convert a ciphertext for Alice into the ciphertext for Bob. Recently, ID-based proxy re-encryption schemes are receiving considerable attention for a variety of applications such as distributed storage, DRM, and email-forwarding system. And a non-interactive identity-based proxy re-encryption scheme was proposed for achieving CCA-security by Green and Ateniese. In the paper, we show that the identity-based proxy re-encryption scheme is unfortunately vulnerable to a collusion attack. The collusion of a proxy and a malicious user enables two parties to derive other honest users' private keys and thereby decrypt ciphertexts intended for only the honest user. To solve this problem, we propose two ID-based proxy re-encryption scheme schemes, which are proved secure under CPA and CCA in the random oracle model. For achieving CCA-security, we present self-authentication tag based on short signature. Important features of proposed scheme is that ciphertext structure is preserved after the ciphertext is re-encrypted. Therefore it does not lead to ciphertext expansion. And there is no limitation on the number of re-encryption.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.936-939
• /
• 2002

FPCA is the necessary device to design of hardware at present, it is researched on many ways of applying to design caused by expansion of capacity in recent years. One of these applying ways is SoC (System on a Chip) that is proposed for realizing the basic function of a system. For realizing SoC efficiently, IP (Intellectual property) is very important and developed for re-use of hardware. A MPU for built-in exists as an IP. But almost of MPUs at present as an IPs are lengthy and large-scale for using embedded-application. Furthermore, the function of executing specific treatment critically is required to embedded MPU. We propose a flexible and small scale MPU and its design method.

• Journal of architectural history
• /
• v.7 no.2 s.15
• /
• pp.127-140
• /
• 1998

It seems obvious to the contemporary eye that modern technology has finally brought chaotic abundance to the present world, and provided a superficial civilization over the last century. Nevertheless, such an argument about the external phenomena of present culture does not help constitute the right track of modern technology and architecture. Rather, this discussion comes to re-signify the importance of critical metaphysics as a part of man's cultural activities, especially the ontological meaning of them. In this point, the research is intended both to re-certify the essential nature and mythic value of technology through reviewing the ancient and modern philosophical contemplations, and to examine its architectural condition against the rapid expansion of commercial material-culture.