• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.770-774
• /
• 2003

We propose the re-design method of modal parameters to depress the 2nd resonance peak of the ultra-slim-height optical pick-up actuator. With the addition of tile counter mode near the 2nd resonance frequency, we can achieve the gain margin which is sufficient to meet the system requirement. It would alleviate the burden of the additional filter for a high-speed drive.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.120-127
• /
• 1993

This paper is concerned with the integrated computer program system aiming at efficiently performing the structural analysis and design. The developed computer program system is introduced and applied to a simple two-dimensional structure to show the general concept of the integrated system. Some design modifications and re-analyses are illustrated including local mesh refinement, These show the efficiency in doing design modification and analysis.

• 한국의류학회지
• /
• 제15권1호
• /
• pp.15-27
• /
• 1991

This study is to investigate the royal wedding garments found out in Gn-Rs-Do-Gam-Eui-Gue during Yi Dynasty. The results are as follows: 1. The wedding garments for kings and princes, as well as for queens and princesses, had a tendency to increase in their kinds and number 2. The number of' Sang-bok (상복)' for queens and princesses was decreased about $50\%$ after the publication of Jeong-Re (정리). 3. Casual wears for queens and princesses were decreased to the halves in kind, and its number was decreased about $60\%$ .4. Clothings for court ladies showed changes in kind. 5. Documents about clothings for parents of queen's in wedding ceremony cannot be found in the literatures, such as Guk-Hon-Jeong-ke(국혼정예), Sang-Bang-Jeong-Re(상방정예). and Eui-Cue published in the 35th and 38th year of King Yeongjo's reign, respectively. 6. The number of ornamental bars including wigs was decreased about $50\%$ after the publication of Guk -Hon -Jeong- Re.

• 한국가스학회지
• /
• 제19권3호
• /
• pp.32-37
• /
• 2015

LNG는 극저온액체로 저장탱크의 열유입으로 인하여 지속적으로 BOG가 발생하고 있으며, 이의 효과적인 방법의 재액화가 요구되고 있다. 이 BOG의 재액화에는 공급되는 저압 펌프 후의 LNG의 냉열을 이용하는 데, 현재의 공정은 BOG 단위 발생량에 대하여 10배 이상의 LNG 흐름이 요구되고 있다. 본 연구에서는 NGL분리액화와 2차 고압펌프 후의 LNG 냉열을 이용하는 공정을 새롭게 고안하였으며, 이를 분석한 결과 LNG 소요유량이 3~4배에 불과한 매우 효과적인 재액화 시스템이 되었다. 본 고안에 의하면 하절기에도 원활한 BOG 재액화가 가능하므로, LNG기지의 안전성 향상과 공급 의 효율을 높일 수 있는 매우 효과적인 공정으로 분석되었다.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.150-159
• /
• 2010

재진입 비행체의 Approach & Landing단계는 Steep Glideslope 단계, Circular Flare 단계, Flare Maneuver 단계로 이루어지며, 본 논문에서는 실시간 경로 생성을 위하여 기하학적 조건을 이용한 기준궤적 생성 알고리즘을 사용하였다. 이를 통하여 재진입비행체의 착륙 안정성을 고려한 기준궤적을 빠른 시간 안에 생성할 수 있다. 그리고 본 논문에서는 비선형 시스템에 대하여 강건성을 가지는 Mamdani Fuzzy PD Controller를 통한 종방향 및 횡방향 제어기를 설계하였다. 또한 Downrange 와 Crossrange의 초기 오차를 포함하는 시뮬레이션을 수행하여, 제안된 Fuzzy 제어기의 우수한 성능을 확인하였다.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.59-64
• /
• 2006

A new method to obtain explicit re-parameterization that preserves the curve degree and parametric domain is presented in this paper. The re-parameterization brings a curve very close to the arc length parameterization under $L_2$ norm but with less segmentation. The re-parameterization functions we used are $C^1$ continuous piecewise rational linear functions, which provide more flexibility and can be easily identified by solving a quadratic equation. Based on the outstanding performance of Mobius transformation on modifying pieces with monotonic parametric speed, we first create a partition of the original curve, in which the parametric speed of each segment is of monotonic variation. The values of new parameters corresponding to the subdivision points are specified a priori as the ratio of its cumulative arc length and its total arc length. $C^1$ continuity conditions are imposed to each segment, thus, with respect to the new parameters, the objective function is linear and admits a closed-form optimization. Illustrative examples are also given to assess the performance of our new method.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.242-242
• /
• 2002

Two MIMAS MaX fuel rods base-irradiated in a commercial PWR have been reinstrumented and irradiated at a test reactor. The fabrication data for two MOX roda are characterized together with base irradiation information. Both Rods were reinstrumented to be fitted with thermocouple to measure centerline temperature of fuel. One rod was equipped with pressure transducer for rod internal pressure whereas the other with cladding elongation detector. The post irradiation examinations for various items were performed to determine fuel and cladding in-pile behavior after base irradiation. By using well characterized fabrication and re-instrumentation data and power history, the fuel performance code, COSMOS, is verified with measured in-pile and PIE information. The COMaS code shows good agreement for the cladding oxidation and creep, and fission gas release when compared with PIE dad a after base irradiaton. Based on the re-instrumention information and power history measured in-pile, the COSMOS predicts re-instrumented in-pile thermal behaviour during power up-ramp and steady operation with acceptable accuracy. The rod internal pressure is also well simulated by COSMOS code. Therfore, with all the other verification by COSMOS code up to now, it can be concluded that COSMOS fuel performance code is applicable for the design and license for MaX fuel rods up to high burnup.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.317-322
• /
• 2005

This study is aimed to analyze the effects of heat pipe shape on the heat transfer in solar collector with a axial grooved heat pipe. In the design of a heat pipe. two of the most important criteria to be met are the operating temperature range and the maximum heat transport capacity, When the operating temperature range is known and the working fluid has been selected, the maximum heat transport capacity depends strongly on capillary pressure and liquid flow. The heat transport capacity of the heat pipe will depend on the geometry of the heat pipe, the wick structure. the vapor channel shape. groove number. cooling temperature. condenser length and pipe diameter. So various shapes are used for mathematical models of two-phase flow in grooved heat pipe. From the results. the adequate groove shape and scale are presented by considering the heat transport and capillary limitation.

• International Journal of Contents
• /
• 제15권3호
• /
• pp.32-38
• /
• 2019

We usually suffer from difficulties in treating or managing Big Data generated from various digital media and/or sensors using traditional mining techniques. Additionally, there are many problems relative to the lack of memory and the burden of the learning curve, etc. in an increasing capacity of large volumes of text when new data are continuously accumulated because we ineffectively analyze total data including data previously analyzed and collected. In this paper, we propose a general-purpose classifier and its structure to solve these problems. We depart from the current feature-reduction methods and introduce a new scheme that only adopts changed elements when new features are partially accumulated in this free-style learning environment. The incremental learning module built from a gradually progressive formation learns only changed parts of data without any re-processing of current accumulations while traditional methods re-learn total data for every adding or changing of data. Additionally, users can freely merge new data with previous data throughout the resource management procedure whenever re-learning is needed. At the end of this paper, we confirm a good performance of this method in data processing based on the Big Data environment throughout an analysis because of its learning efficiency. Also, comparing this algorithm with those of NB and SVM, we can achieve an accuracy of approximately 95% in all three models. We expect that our method will be a viable substitute for high performance and accuracy relative to large computing systems for Big Data analysis using a PC cluster environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권5호
• /
• pp.1847-1870
• /
• 2021

With the development of information and communication technologies, especially wireless networks and cell phones, the e-voting system becomes popular as its cost-effectiveness, swiftness, scalability, and ecological sustainability. However, the current e-voting schemes are faced with the problem of privacy leakage and further cause worse vote-buying and voter-coercion problems. Moreover, in large-scale voting, some previous e-voting system encryption scheme with pairing operation also brings huge overhead pressure to the voting system. Thus, it is a vital problem to design a protocol that can protect voter privacy and simultaneously has high efficiency to guarantee the effective implementation of e-voting. To address these problems, our paper proposes an efficient unidirectional proxy re-encryption scheme that provides the re-encryption of vote content and the verification of users' identity. This function can be exactly applied in the e-voting system to protect the content of vote and preserve the privacy of the voter. Our proposal is proven to be CCA secure and collusion resistant. The detailed analysis also shows that our scheme achieves higher efficiency in computation cost and ciphertext size than the schemes in related fields.