• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.224-227
• /
• 2001

ZnO buffer layers were used to grow ZnO films on c-plane sapphire substrates. The role of ZnO buffer layers in the growth of ZnO thin films on sapphire substrates was investigated by scanning electron microscopy, X-ray diffraction, and Photolumminescence(PL) measurements. At the optimized ZnO buffer layer thickness of 100 $\AA$, FWHM of $\theta$ -rocking curve of ZnO thin films was minimized to 0.73 degrees and room temperature PL spectra showed that deep level emission was not hardly seen. The optimization of the ZnO buffer layer thickness resulted in improvements of the surface morphology and crystalline quality of ZnO thin films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.347-348
• /
• 2006

This paper performed the basic study for developing the Photodynamic Therapy Equipment for medical treatment. The equipment have been manufactured by using the High Bright Light Emitting Diode and TLC5941 integrated circuit. As a result, 630nm Light Emitting Diode Module was made for the optimization of irradiation condition. And we confirmed the current change according to increase of the level of Light Emitting Diode Module.

• Journal of Information Display
• /
• 제7권4호
• /
• pp.1-4
• /
• 2006

The optical performances of rounded prism films were investigated using a ray tracing technique. The angular distribution of the luminous intensity was obtained as functions of the prism pitch and the curvature of rounded apex and valley of prism arrays. The gain of the on-axis luminance decreased with decreasing curvature (increasing diameter) and pitch. The existence of the curved area on the prism film decreased the recycling efficiency of the prism film, i.e., the rays which would otherwise have been recycled through total internal reflections via the prism surfaces were refracted on the curved regions and redirected toward directions other than the on-axis direction. Quantitative correlation between the luminance gain and the curvature in addition to the prism pitch was obtained, which might serve as basic data for the optimization of prism films and the manufacturing processes.

• 대한치과의사협회지
• /
• 제52권3호
• /
• pp.147-152
• /
• 2014

Recently the patient exposure by medical and dental x-ray examination has grown rapidly and diagnostic radiology represents the largest source of man-made radiation. For the patient protection, the principle of justification and optimization should be followed. All the radiographic examinations have to show a potential benefit to the patient weighing against the potential risk. After they are justified, the radiographic exposure should be kept as low as reasonably achievable, taking into account economic and social factors. For the safe use of radiation in dentistry, the radiation safety management in accordance with the legislation is important. The present status and the future of radiation safety management in dental radiology in Korea and other country will be discussed.

• 한국정밀공학회지
• /
• 제25권4호
• /
• pp.53-60
• /
• 2008

Electron detectors used in scanning electron microscope accept electrons emitted from the specimen and convert them to an electrical signal that, after amplification, is used to modulate the gray-level intensities on a cathode ray tube, producing an image of the specimen. Electron detector is one of the key components dominating the performance of scanning electron microscope so that the development of electron detectors having high performance is indispensable to acquire high quality images using scanning electron microscope. In this paper, we designed and manufactured an electron detector and conducted a couple of image capture experiments using it. In particular, scintillator which generates light photons when it is struck by high-energy electrons was manufactured and experimental studies on the optimization of manufacturing condition was carried out. From experiments to evaluate the performance of our detector, it was verified that the performance of our detector is equivalent to or better than that of the conventional one.

• 한국음향학회지
• /
• 제1권1호
• /
• pp.19-26
• /
• 1982

n optimization technique is adapted to determine the stage enclosure configuration preferred by performers. The merit function which quantifies the ease of ensemble among the performers is derived from a set of qualitative conditions recommended by researchers of hall acoustics. The ray path tracing technique based on the modified method of images is used to analyze acoustical characteristics at any locations of performers in stage enclosure. The gradient search technique is employed to find the geometric parameters which maximmize the merit function. As an example, optimum stage enclosure configuration of the trio chamber music is obtained using the computer program developed. The developed technique can be used in the design of concert hall stage and also in forming a special enclosure with movable reflecting surfaces.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.174-176
• /
• 2005

On the basis of successful experiences and data from author's past experimental results of friction stir welding on thin aluminum plates, thick aluminum plate of high strength 2000 series has been carried out in this study. For various combination of rotating speed, welding speed and tool (RIWRC38-C) shape, the butt welded specimens has been prepared to check the metallurgical characteristics, hardness distributions and defects. From the results, feasible welding conditions have been obtained as 450 rpm rotating speed and 5 mm/min welding speed. Using these optimum welding parameters, 38.1mm-thickness A2519-T87 plates have been FSWelded in single pass. A good weld surface appearance and defects free weld zone has been observed in X-ray inspection. Softened region has been generated by dissolution of precipitates and coarsened microstructure in the stir zone after FSWeld.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.693-696
• /
• 2009

The ray-tracing technique was used to optimize the light guide plate for the purpose of improving the on-axis luminance on the edge-lit backlights. One-dimensional prisms and engraved V-shaped patterns were applied to the upper and the lower surfaces of the light guide plate, respectively. By optimizing the apex angles of these micro-structures, as well as the shape of the reverseprism film put over the light guide plate, highly-collimated light-output distribution could be obtained on the backlight, which may contribute to the development of mobile LCD's with low power consumption.

• 한국세라믹학회지
• /
• 제53권5호
• /
• pp.548-556
• /
• 2016

Recently, porous alumina-based ceramics have been extensively applied in the semi-conductor and display industries, because of their high mechanical strength, high chemical resistance, and high thermal resistance. However, the high electrical resistance of alumina-based ceramics has a negative effect in many applications due to the generation of static electricity. The low electrical resistance and high air permeability are key aspects in using porous alumina-based ceramics as vacuum chucks in the semi-conductor industry. In this study, we tailored the pore structure of porous alumina-based ceramics by adjusting the mixing ratio of the starting alumina, which has different particle sizes. And the electrical resistance was controlled by using chemical additives. The characteristics of the specimens were studied using scanning electron microscopy, mercury porosimetry, capillary flow porosimetry, a universal testing machine, X-ray diffraction, and a high-resistance meter.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권2호
• /
• pp.225-234
• /
• 2018

A Multibeam Echo Sounder (MBES) is commonly used for rapid seafloor mapping. We herein present a time-domain integrated system simulation technique for MBES development. The Modeling and Simulation (M&S) modules consist of four parts: sensor array signal transmission, propagation and backscattering modeling in the ocean environment, beamforming of the received signals, and image processing. Also, the simulation employs a ray-theory-based algorithm to correct the reconstructed bathymetry, which has errors due to the refraction caused by the vertical sound velocity profile. The developed M&S technique enables design parameter verification and system parameter optimization for MBES. The framework of this technique can also be potentially used to characterize the seabed properties. Finally, typical seafloor images are presented and discussed.