• Journal of radiological science and technology
• /
• v.2 no.1
• /
• pp.45-50
• /
• 1979

For this study, 2,712 sheets of the chest x-ray films of neonatuses, infants and early children were observed statistically and then the following results were obtained: 1. Seasonal increment of patients was overwhelming in spring and summer in compare with in autumn and winter. 2. Males was majority in distribution by sex. Neonatal and infancy group was the largest in number by forming 29.46% in distribution by age group and then follows six-years group(14.75%), one-year group(13.64%) and five-years group(12.61%) 3. In radiographical projection for chest, a great proportion was P-A projection as 53.72%. But, almost all the neonatal and infancy group and emergency patients were by A-P projection 4. As for x-ray findings, 78.47% was normality while 21.53% was abnormality. Tuberculosis(176 cases), was the largest in number in abnormal cases and next in rank was pneumonia(128 cases)and then congenital heart disease(82 cases). 5. Adequacy of exposure was disclosed as follows: 57.01% in correct-exposure 29.20% in over-exposure, 13.79% in under-exposure. 6. The x-ray beam was not restricted in 77.10% of total films. 7. "Good" formed 30.01% in position immobilizing of the patient and "ordinary" formed 38.02%, "bad" 31.97%. Especially, "Bad" formed high percentage in neonatal and infancy group.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.27.3-28
• /
• 2008

In this study, we report a new Monte Carlo ray tracing technique for estimating GOCI (Geostationary Ocean Color Instrument) radiative transfer characteristics and imaging performance simultaneously. First, a full scale GOCI optical model was constructed with measured characteristics at the component level and placed in the geostationary orbit. An optical model of approximated GOCI target area centered at the Korean penninsular was then built using the USGS coastal line data and representative land and sea surface reflectivity data. The light rays launched from a simulated sun model travel to the Earth surface, where they are reflected and scattered. Some of the light rays that are headed to the GOCI model in the orbit were selected and traced, as they have entered into the GOCI aperture. As they pass through each GOCI optical part, the ray path and intensity are adjusted according to the measured characteristics for reflection, transmission, refractive index and surface scattering. The ray-traced imaging and radiative transfer performance indicators confirm that the computer generated GOCI optical system with measured characteristics can be used for in-orbit operation simulation following the designed measurement sequence. The computational technique and its implications as a operation support tool are discussed.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.2
• /
• pp.97-102
• /
• 2007

Objective : The authors attempted to evaluate the pattern of the airway narrowing due to prevertebral soft tissue swelling after surgery of the anterior cervical spine and their clinical significances using plain cervical X-ray images. Methods : Twenty-four patients undergoing anterior cervical spine surgery were reviewed from January 2004 to December 2005. Postoperatively, in daily basis, lateral radiograph of the neck was obtained in neutral position. We measured the upper airway diameter above and below the epiglottis level and prevertebral soft tissue diameter every day for a week and finally 2 weeks after surgery using their simple lateral cervical X-ray films. Results : Both airway narrowing and prevertebral soft tissue swelling were maximum in postoperative 2 days, and decreased rapidly in postoperative 7 days. Airway narrowing was aggravated postoperatively but slowly decreased as prevertebral soft tissue swelling diminished. But, the severity of airway narrowing showed no clinical correlations with clinical symptom and radiologic severity. Conclusion : Not all patients who show severe airway narrowing and prevertebral soft tissue swelling on their plain cervical X-ray film complain respiratory insufficiency. But, the patients with undergoing anterior cervical spine surgery should be monitored carefully for respiratory insufficiency, especially during several days following operation because both airway narrowing and prevertebral soft tissue swelling become peak at postoperative 2-3 days.

• Korean Journal of Plant Taxonomy
• /
• v.40 no.4
• /
• pp.240-246
• /
• 2010

Two newly naturalized species were recorded from Incheon (Youngjong-do) and Ulsan. Among them, Bidens polylepis S.F. Blake (Asteraceae) was widespread and was found in the following locations: Unbuk bridge, Unbuk-dong, Jung-gu in Incheon, and Chuiseosan, Banggi-ri, Samnam-myeon as well as a Saemmul mountain cabin on Jaeaksan, Sangbuk-myeon in Ulju-gun, Ulsan. Bidens polylepis can be distinguished from congeneric species by its larger ray-flowers. The Korean name of Bidens polylepis was newly formulated based on the characteristic of its yellow ray-flowers and on the Korean name of the genus Bidens (Asteraceae). The other species, numerous populations of Saponaria officinalis L. (Caryophyllaceae) were found in two areas in Jeotgae village, Unseo-dong, Jung-gu, Incheon. Saponaria officinalis can be distinguished from congeneric species in the family by two features, shallow calyx teeth and a petal with appendages at the base of the blade.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.9 no.1
• /
• pp.25-31
• /
• 1979

The utilization of x-ray for diagnosis and examination is increasing by about 5-15% every year, therefore, it would be mandatory to protect the patients from exposures and so, studies in this field are performed even now. In dental field, the area of irradiation is limited any to the head and neck area, but the irradiated angle is varied following the objected tooth, so the adjacent structures lens and thyroid gland would be fragile to radiation. And the scattered radiation is one of the complicated problems in the protection because of specificity of dental x-ray and its object structures. The author, by using TLD (Thermo luminescent Dosimeter; Teledyne Isotopes-Model 7300, Element; TLD 200(CaF₂:Dy) and Capintec(Capintec Model 192, PM-30 Diagnostic chamber 28㎖ active volume), tried a measurement of air dose distribution of the scattered radiation and the irradiated dose of lens and thyroid gland under the condition of taking the film on the left maxillary molar. The results were as follows: 1. The half value layer of adapted dental x-ray machine was measured, and is 1.44㎜ Al. 2. The time of irradiation on the left maxillary molar in the Alderson Rando Phantom, the measured doses of left and right lens, and thyroid gland were 8,9mR, 1,2mR and 2,8mR. Under the same conditions, the scattered radiation at the distance of 1 meter from the phantom were 84 μR at the front side, 11μR at the back side, 18μR at the right side and 72μR at the left side. 3. Under the same conditions, the dose showed higher value by about 5% in the presence of object(phantom) than in the case of absence.

• The Korean Journal of Pain
• /
• v.35 no.2
• /
• pp.129-139
• /
• 2022

C-arm fluoroscopy is a useful tool for interventional pain management. However, with the increasing use of C-arm fluoroscopy, the risk of accumulated radiation exposure is a significant concern for pain physicians. Therefore, efforts are needed to reduce radiation exposure. There are three types of radiation exposure sources: (1) the primary X-ray beam, (2) scattered radiation, and (3) leakage from the X-ray tube. The major radiation exposure risk for most medical staff members is scattered radiation, the amount of which is affected by many factors. Pain physicians can reduce their radiation exposure by use of several effective methods, which utilize the following main principles: reducing the exposure time, increasing the distance from the radiation source, and radiation shielding. Some methods reduce not only the pain physician's but also the patient's radiation exposure. Taking images with collimation and minimal use of magnification are ways to reduce the intensity of the primary X-ray beam and the amount of scattered radiation. It is also important to carefully select the C-arm fluoroscopy mode, such as pulsed mode or low-dose mode, for ensuring the physician's and patient's radiation safety. Pain physicians should practice these principles and also be aware of the annual permissible radiation dose as well as checking their radiation exposure. This article aimed to review the literature on radiation safety in relation to C-arm fluoroscopy and provide recommendations to pain physicians during C-arm fluoroscopy-guided interventional pain management.

• Journal of Intelligence and Information Systems
• /
• v.28 no.4
• /
• pp.27-40
• /
• 2022

Medical AI, which has lately made significant advances, is playing a vital role, such as assisting clinicians with diagnosis and decision-making. The field of chest X-rays, in particular, is attracting a lot of attention since it is important for accessibility and identification of chest diseases, as well as the current COVID-19 pandemic. However, despite the vast amount of data, there remains a limit to developing an effective AI model due to a lack of labeled data. A research that used federated learning on chest X-ray data to lessen this difficulty has emerged, although it still has the following limitations. 1) It does not consider the problems that may occur in the Non-IID environment. 2) Even in the federated learning environment, there is still a shortage of labeled data of clients. We propose a method to solve the above problems by using the self-supervised learning model as a global model of federated learning. To that aim, we investigate a self-supervised learning methods suited for federated learning using chest X-ray data and demonstrate the benefits of adopting the self-supervised learning model for federated learning.

• Computers and Concrete
• /
• v.31 no.5
• /
• pp.433-442
• /
• 2023

This study presents the visually observed behavior of fibers embedded in concrete samples that were subjected to a flexural bending test. Three types of fibers such as macro polypropylene, macro polyethylene, and the hybrid of steel and polyvinyl alcohol were mixed with cement by a designated mix ratio to prepare a total of nine specimens of each. The bending test was conducted by following ASTM C1609 with a net deflection of 2, 4, and 7 mm. The X-ray computed tomography (XCT) was carried out for 7 mm-deflection specimens. The original XCT images were post-processed to denoise the beam-hardening effect. Then, fiber, crack, and void were semi-manually segmented. The hybrid specimen showed the highest toughness compared to the other two types. Debonding based on 2D XCT sliced images was commonly observed for all three groups. The cement matrix near the crack surface often involved partially localized breakage in conjunction with debonding. The pullout was predominant for steel fibers that were partially slipped toward the crack. Crack bridging and rupture were not found presumably due to the image resolution and the level of energy dissipation for poly-fibers, while the XCT imaging was advantageous in evaluating the distribution and behavior of various fibers upon bending for fiber-reinforced concrete beam elements.

• Journal of radiological science and technology
• /
• v.18 no.1
• /
• pp.63-70
• /
• 1995

In this pauper, the back, forward, side and $45^{\circ}$ oblique scatter dose were measured the X-ray exposure conditions 60, 80, 100, 120kV, FFD 100cm, FS $20\times20cm$, toward the $25\times25cm\times10\sim20cm$ of solid water, paraffin and MiX-DP phantom, and Pb, Cu, Al, and styrofoam meterials, by the electrometer and 5.3 cc ionization chamber. The obtained results are summarized as following. 1. The percentage depth dose(PDD) at the range of the diagnostic x-ray energy were appeared 50 % depth dose at the 2 cm depth with 60 kV, and 5 cm depth with 120 kV X-ray, 10 % depth dose at the 10 cm depth with 60 kV and 14 cm depth with 120 kV X-ray, 5 % below depth dose at the 20 cm depth. 2. The back scatter dose which were generated the surface of Pb, Cu and Al metal plates were 10 % below, and than the back scatter dose at the Pb plate were a most amount of these which were about 10 %, and were appeared the order of Cu and Al. 3. The percentage forward scatter were appeared from 50 % to 65 %, and the more phantom thicknees become, the more forward scatter were increased with the ratio of 5 % per 5 cm thickness. 4. The percentage back scatter which were generated the tissue equivalence meterials solid water, paraffin and MiX-DP were from 20 % to 40 %, and than the back scatter dose at the solid water were a mest amount of those, and paraffin and MiX-DP were appeared with the next values. 5. The percentage $90^{\circ}$ lateral and $45^{\circ}$ oblique side scatter dose were measured from 4 % to 12 %. a most amount of scatter dose which were generated from the patient in radiography were the forward scatter, the next values were the back scatter, the third values were the $90^{\circ}$ lateral scatter.

• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.241-249
• /
• 2016

The present study used a digital angiography x-ray device to measure the space dose and exposure dose of patients and practitioners using x-ray tube shielding devices developed in our laboratory. The intent of the study was to reduce the space dose within the test room, and to reduce the exposure dose of patients and practitioners. The patient and practitioner exposure doses were measured in five configurations in a human body model. The glass dosimeter was placed on the eye lenses, thyroid glands, left shoulder, right shoulder, and gonads. The beam was collimated at full size and at a 48% reduction for a comparative analysis of the measurements. The space dose was measured with an ion chamber at distances of 50 cm, 100 cm, and 150 cm from the x-ray tube under the following conditions: no shielding device; a shielding device made of 3-mm-thick lead (Pb) [Pb 3 mm shield], and a shielding device made of 3-mm-thick Pb (outside) and 3-mm-thick aluminum (Al) (inside) [Pb 3 mm＋Al 3 mm shield]. The absorbed dose was the lowest when the 3-mm-thick Pb＋3-mm-thick Al shield was used. For measurements made with collimated beams with a 48% reduction, the dose was the lowest at $154{\mu}Gy$ when the 3-mm-thick Pb＋3-mm-thick Al shield was used, and was $9{\mu}Gy$ lower than the measurements made with no shielding device. If the space dose can be reduced by 20% in all situations where the C-arm is employed by using the x-ray tube shielding devices developed in our laboratory, this is expected to play an important role in reducing the annual exposure dose for patients, practitioners, and assistants.