• Applied Microscopy
• /
• 제46권1호
• /
• pp.32-36
• /
• 2016

The Cu-based bulk glassy alloys in Cu-Zr-Ti-Ni systems were prepared by means of copper mold casting. The Cu-based bulk glassy alloys samples were tested by X-ray diffractomer (XRD), differential scanning calorimeter, scanning electron microscopy (SEM), Instron testing machine and Vickers hardness instruments. The result indicated that the prepared Cu-Zr-Ti-Ni alloys were bulk glassy alloys. The temperature interval of supercooled liquid region (${\Delta}T_x$) was about 45.48 to 70.98 K for the Cu-Zr-Ti-Ni alloy. The Vickers hardness was up to 565 HV for the $Cu_{50}Zr_{25}Ti_{15}Ni_{10}$ bulk glassy alloy. The $Cu_{50}Zr_{25}Ti_{15}Ni_{10}$ bulk glassy alloys were annealed in order to obtain nanocrystals. The results showed that the Vickers hardness was raise up to 630 HV from 565 HV. As shown in XRD results, the amorphous alloys changed to nanocrystals, which were $Cu_8Zr_3$, $Cu_3Ti_2$ and CuZr, improved the hardness. The SEM analysis showed that the compression fractured morphology of amorphous alloys was brittle fracture, and the fracture morphology after annealing was ductile fracture. This proved that annealing of amorphous to nanocrystals can improve the plasticity and toughness of amorphous alloys.

• 한국염색가공학회지
• /
• 제6권1호
• /
• pp.62-70
• /
• 1994

Silk fibroin was dissolved in 9.3 M LiBr aqueous solution at 4$0^{\circ}C$ for 1 hour. The dissolved silk fibroin was regenerated by casting the dialyzed solution into the membrane. The freshly prepared silk fibroin membrane was soluble in water and was. mainly consisted of random coil conformation. By the treatments in saturated water vapor at 3$0^{\circ}C$ and in 75% ethanolic aqueous solution (V/V), the insoluble membranes were obtained and the structure and morphology of those were investigated for the structure by means of X-ray diffraction analysis, infrared spectroscopy, thermal analysis. Rheovibron and scanning electron micrograph. Silk II type crystals were obtained by treating amorphous silk fibroin membrane in the random coil conformtion with 75% ethanol solution(V/V). Crystallization to silk II type crystals occured even after a few minutes, and a large number of silk II type crystals were formed after 30 mins. On the other and, the membrane treated in saturated water vapor was composed of the mixtures of silk I and silk II type crystals. A large number of silk I and silk II type crystals were formed after 24 hours. The micro brownian motion in the amorphous regions of silk fibroin membrane started at about 175~185$^{\circ}C$. $\alpha$ dispersion appeared at about 20$0^{\circ}C$ in the amorphous membrane, and at about 22$0^{\circ}C$ in the crystalline membrane. The crystallization of random coil conformation to silkII type crystals occured at about 215$^{\circ}C$. The surface, bottom and cross-section of the membranes were observed by scanning electrom microscope. Fine forms alike spherulites appeared at the surface of crystalline membrane.

• 한국주조공학회지
• /
• 제17권4호
• /
• pp.338-346
• /
• 1997

Mechanical properties of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composites fabricated by the reaction squeeze casting were compared with those of ($15%Al_2O_3{\cdot}SiO_2$)/Ai composites. Al-Ni intermetallic compounds ($10{\sim}20 {\mu}m$) formed by the reaction between nickel powder and molten aluminum were uniformly distributed in the Al matrix. These intermetallic compounds were identified as $Al_3Ni$ using X-ray diffraction analysis and they resulted in beneficial effects on room and high temperature strength and wear resistance. Microhardness values of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composite were greater by about 100Hv than those of ($15%Al_2O_3{\cdot}SiO_2$)/Al composite. Wear resistance of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composites was superior to that of ($15%Al_2O_3{\cdot}SiO_2$)/Al composites regardless of the applied load. While tensile and yield strength of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composites were greater at room temperature and $300^{\circ}C$, strength drop at high temperature was much smaller in hybrid composites.

• 폴리머
• /
• 제32권6호
• /
• pp.580-586
• /
• 2008

4,4'-(Hexafluoroisopropylidene) diphthalic anhydride (6FDA) 와 1,3-bis (3-aminophenoxy) benzene(BAPB)의 조성에 2,2-bis [4-(4-aminophenoxy)phenyl] hexafluoropropane (BAPP)를 다양한 몰 비에 따른 폴리이미드(PI) 공중합체를 합성하였다. PI 공중합체 필름들은 여러 열처리 과정을 통하여 용액 캐스팅 (solution casting)된 폴리아믹산(PAA)으로부터 얻었다. 퓨리에 변환 적외선 분광기(FT-IR), 넓은 각 X-선 회절(XRD), 전계 방사형 주사 전자 현미경(FE-SEM) 시차 주사 열량계(DSC)와 열 중량 분석기(TGA), 만능 인장 시험기 (UTM) 그리고 자외선-가시광선 흡광도기 (UV-Vis. spectrometer) 등을 사용하여 PI 공중합체 필름의 열적 기계적 성질, 모폴로지 및 광학 투명도를 측정하였다. PI 공중합체 필름의 유리전이온도 및 최종 강도와 초기 탄성률은 BAPP의 몰 비가 증가할수록 증가하였으나, 초기분해온도는 BAPP의 몰 비 증가에 무관하게 일정하였다. BAPP가 charge transfer complex를 형성하는 이유로 BAPP 농도가 증가함에 따라 PI 공중합체 필름의 투명도는 약간씩 감소하였다.

• 한국정보과학회논문지:시스템및이론
• /
• 제31권5_6호
• /
• pp.360-370
• /
• 2004

적응적 메쉬 세분화(AMR)는 여러 과학과 공학 분야에서 이용되는 보편적인 계산 시뮬레이션기법이다. AMR 데이타가 계층적인 다중해상도 데이타 구조로 이뤄져 있음에도 불구하고, 어떤 적절한 자료구조로의 변형 없이, 이 데이타를 광선추적법이나 스플래팅과 같은 전통적인 볼륨 가시화 알고리즘들을 이용하여 가시화 하는 것은 불가능하다. 본 논문에서는 AMR 데이타로부터 생성된 k-d 트리와 팔진트리를 이용하는 계층적 다중해상도 스플래팅에 대해 설명한다. 이 기법은 최신의 범용 PC 그래픽스 하드웨어를 이용하여 AMR 데이타의 가시화를 구현하는데 적합하다. 대화식으로 변환함수와 뷰잉 / 렌더링 파라메터를 설정할 수 있는 기능을 제공하는 사용자 인터페이스에 대해서도 설명한다. nVIDIA GeForce3 그래픽스 카드를 내장한 범용의 PC를 이용해 얻은 실험 결과로부터, 제안된 기법을 이용해 AMR 데이타를 대화식으로(초당 20프레임 이상의 속도로) 렌더링 할 수 있음을 보인다. 본 기법은 시간 가변 AMR 데이터의 병렬 렌더링에도 쉽게 적응될 수 있을 것이다.

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.677-684
• /
• 2012

A feasible way to fabricate in-situ Al/TiC composites was investigated. An elemental mixture of $Al-TiO_2-C$ pellet was directly added into an Al melt at $800-920^{\circ}C$ to form TiC by self-combustion reaction. The addition of CuO initiates the self-combustion reaction to form TiC in $1-2{\mu}m$ at the melt temperature above $850^{\circ}C$. Besides the CuO addition, a diluent element of excess Al plays a significant role in the TiC formation by forming a precursor phase, $Al_3Ti$. Processing parameters such as CuO content, the amount of excess Al and the melt temperature, have affected the combustion reaction and formation of TiC, and their influences on the microstructures of in-situ Al/TiC composites are examined.

• 대한금속재료학회지
• /
• 제48권7호
• /
• pp.589-597
• /
• 2010

In the present study, the effect of variation in alloying elements on the carbide formation behavior during casting and homogenization treatment of M2 high speed steels was investigated. M2 high speed steels of various compositions were produced by vacuum induction melting. Contents of C, Cr, W, Mo, and V were varied from the basic composition of 0.8C, 0.3Si, 0.2Mn, 4.0Cr, 6.0W, 5.0Mo, and 2.0V in weight percent. Homogenization treatment at $1150^{\circ}C$ for 1.5 hr followed by furnace cooling was performed on the ingots. Area fraction and chemical compositions of eutectic carbide in as-cast and homogenized ingots were analyzed. Area fraction of eutectic carbide appeared to be higher in the ingots with higher contents of alloying elements the area fraction of eutectic carbide also appeared to be higher on the surface regions than in the center regions of ingots. As a result of the homogenization treatment, $M_2C$ carbide, which was the primary eutectic carbide in the as-cast ingots, decomposed into thermodynamically stable carbides, MC and $M_6C$. The latter carbide was found to be the main one after homogenization. Fine carbides uniformly distributed in the matrix was found to be MC type carbide and coarsened by homogenization.

• 폴리머
• /
• 제34권4호
• /
• pp.369-375
• /
• 2010

용융 중합법을 이용하여 말단에 메틸 말레이미드(methyl maleimide) 반응성기를 가지며 방향족 에스터와 아 미드 결합을 포함하는 액정(liquid crystal, LC)을 합성하였다. 합성된 액정은 용액 캐스팅과 열처리를 거쳐 열경화 성 액정(liquid crystalline thermoset, LCT) 필름으로 제조되었다. 합성된 LC 및 LCT는 적외선 분광기(FTIR), 시차주사 열량계(DSC), 열중량 분석기(TGA), 열-기계 분석기(TMA), X-선 회절기(XRD) 및 가열판이 부착된 편광 현미경(POM) 등을 이용해서 각각 특성 분석을 하였다. 합성된 모든 액정은 스멕틱(smectic) 상을 보였으며 LC와 LCT들의 열적 성질은 주로 주사슬에 포함된 메소젠 구조에 영향을 받았다. 열팽창 계수(coefficients of thermal expansion, CTE)는 27.72~50.95 ppm/$^{\circ}C$ 사이의 값을 보였다.

• 한국차세대컴퓨팅학회논문지
• /
• 제15권5호
• /
• pp.75-83
• /
• 2019

직접 볼륨 렌더링은 의료영상과 같은 3차원 볼륨 데이터의 가시화에 널리 사용되는 방법이다. 본 논문은 직접 볼륨 렌더링의 깊이 인식을 향상시키기 위해 피사계 심도 효과를 볼륨 광선투사법에 적용하는 방법을 제안한다. 제안하는 방법은 인간의 지각 모델을 기반으로 카메라 모델을 적용하며 지터드 렌즈 샘플링을 사용하여 제한된 개수의 광선으로 사실적인 이미지를 획득할 수 있다. 또한, 전처리 과정 없이 GPU 파이프라인 안에서 피사계 심도를 바로 계산하여 볼륨 데이터의 대화식 탐색이 가능하다. 의료영상을 포함한 여러 데이터에 적용한 실험에서 기존 방법보다 2.6~4배 빠른 시간에 피사계 심도 효과를 표현하여 깊이 인식에 보다 도움을 주는 영상을 생성하는 것을 확인하였다.

• Membrane and Water Treatment
• /
• 제10권2호
• /
• pp.165-178
• /
• 2019

Mixed matrix membranes (MMMs) of poly (vinyl alcohol) (PVA) containing certain amounts of H-${\beta}$ zeolite for pervaporation were manufactured by using a solution casting protocol. These zeolite-embedded membranes were then characterized with scanning electron microscope (SEM), X-ray diffraction (XRD) and swelling tests. The membrane separation performance has been examined by means of isopropanol (IPA) dewatering from its highly concentrated aqueous solutions via response surface methodology (RSM). The results have demonstrated that the influences of feed IPA composition (85-95 wt.%), feed temperature ($50-70^{\circ}C$), zeolite loading (15-25 wt.%) and their interactive influences are all statistically significant on both pervaporation flux ($398-1228g/m^2{\cdot}h$) and water/isopropanol separation factor (617-2001). The quadratic models based on the RSM analysis have performed excellently to correlate experimental data with very high determination coefficients and very low relative standard deviations. The optimal pervaporation predictions given by using the RSM models demonstrate a total flux of $953g/m^2{\cdot}h$ and separation factor of 1458, and are excellently verified by experimental results. As reflected by these results, PVA MMMs embedded with hydrophilic $H-{\beta}$ zeolite entities have performed considerably better than its pure counterpart and indicated great potential for isopropanol dehydration applications.