• Korean Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.43-50
• /
• 2004

The purpose of this study is to reach silk protein added in differing amounts to Jeolpyon, Korean traditional rice cake, using rice powder as its primary material, estimation of the micro organism quality, physicochemical property, sensory evaluation and the property of storage period (20${pm} 5 ^{\circ}C$). In the physicochemical property, the content of proximate composition of rice powder was measured as 38.11% of moisture, 56.62% of total sugar, 5.11% of crude protein, 0.52% of crude lipid, 0.25% of ash. And the raw material of silk protein was measured as 6.61% of moisture, 91.22% of crude protein, 6.41% of crude lipid and 0.75% of ash. The pH of raw material for rice powder and silk protein Jeolpyon showed mild acidity as 6.41 and 6.23, respectively. In rice powder and silk protein, total free sugar contents was 0.89% and 0.02%, and total amino acids contents was 4.28% and 52.21 %, respectively. For sensory evaluation. color, taste, softness and adhesiveness were significantly acceptable in control and adding 1 % silk protein. Control and samples added 1$\sim$3% silk protein had high sensory score color in overall acceptance. In conclusion. Jeolpyon can be manufactured with nutritious Jeolpyon by adding silk protein.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.2
• /
• pp.23-33
• /
• 2002

Examined a practical use possibility of paper fly ash that is industrial by-product as a stabilization/hardening agent. Performed unconfined compression test, scanning electron microscopy and pH analysis etc. for 100% paper fly ash-soil mixtures and each paper fly ash-soil mixtures that add cement as the second addition and sulfate component of small quantity for strength promotion and so on. In all cases, strength of admixtures increased according as curing time and mixing ratio increases but almost strength is revealed at mixing early and expressed maximum strength increase efficiency at mixing ratio 9% with raw soil. Compare with the case that use paper fly ash only, in case of cement amount 10~30% was included in paper fly ash, strength of admixtures increases two times and 40% was included, that increases from five to eight times.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.443-450
• /
• 2008

Efficient use of low rank coals (LRC) have been investigated as a method to cope with recent high oil price. Among the coals used in industry, lignite and sub-bituminous coals are belong to the LRC, and have abundant deposit and are distributed worldwide, but high moisture contents and self ignition properties inhibits their utilization. In this paper, chemical coal cleaning to produce ash-free coal from LRC has been investigated. Two technologies, that is, UCC(Ultra Clean Coal) process removing ash from coal and Hyper Coal process extracting combustibles from coal were compared with. UCC process has merits of simple and reliable when it compared with Hyper Coal process, but the remaining ash contents werehigher than Hyper Coal. Hyper Coal has ash contents under the 200ppm when raw coal is treated with appropriate solvent and ion exchange materials to remove alkali materials in extracted solution. The ash-free coal which is similar grade with oil can be used as alternate oil in the industry, and also used as a high grade fuel for IGCC, IGFC and other advanced combustion technology.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.5
• /
• pp.249-255
• /
• 2017

Using a magnetic separation process, pond ash generated in thermoelectric power plants was separated into magnetic materials and nonmagnetic materials in order to make it into a raw material of geopolymers and unburned carbon; screening characteristics according to the particle sizes and magnet strength levels of the pond ash were observed. Based on the results of magnetic separation into fine particle (0.15~0.84 mm) and rough particle (0.84~2.4 mm) pond ash using 3000 G magnets, the weight fraction and ignition loss of nonmagnetic materials were found to be higher than those of magnetic materials, regardless of the particle size. In the case of fine particle pond ash, when the magnet strength was increased from 3000 G to 10000 G, even those materials that were weakly magnetic were separated into magnetic materials, leading to drastic increases in the weight fraction of magnetic materials, such that the ignition loss accounted for 66.9 % (22.8 wt%) of the entire ignition loss of 32.6 wt%, despite of the low ignition loss. Based on the results of measurement of the compressive strength levels of geopolymers made of magnetic-separated rough particle pond ash, the compressive strength of geopolymers made of magnetic materials containing small amounts of unburned carbon was found to be 20 MPa.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.2
• /
• pp.77-83
• /
• 2014

The purpose of this study was to figure out the impacts of iron oxide types and dosages to bloating when producing artificial lightweight aggregates by utilization of recycled resources such as bottom-ash, reject-ash and dredgedsoil. In order to figure out chemical characteristics of raw materials, XRD and XRF analyses were performed. 50 wt% of dredged-soil, 15 wt% of bottom-ash and 35wt.% of reject-ash were mixed, then the amount of iron oxide was varied at 5 to 30 wt% with intervals of 5 wt% with $Fe_2O_3$ and $Fe_3O_4$ respectively. As molded aggregates were sintered by rapid sintering in intervals of $40^{\circ}C$ from $1060^{\circ}C$ to $1180^{\circ}C$, specific gravity and water absorption were measured. As a result, the artificial lightweight aggregate with iron oxide of 10~15 vol% showed the lowest specific gravity, and it was identified that the more iron oxide vol% increases, the more specific gravity increases because of liquid phase sintering.

• Journal of Energy Engineering
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2017

This study was carried out to physicochemical properties and free CaO contents of coal ash in domestic circulating fludized bed combustion power plant using ethylene glycol method. Results of physicochemical properties, there are many differences in CaO contents for the region position in CFBC plant. The reason, It is considered to be reflected that regulation of exhaust concentration for oxides of sulfur and other operation characteristics of region position in CFBC plant. Free CaO contents are 1.96 ~ 10.78% of fly ash and 0.07~4.24 % of bottom ash, fly ash is higher than in the bottom ash. besides CaO contents of raw materials, particle distribution have a lot of influence Free CaO contents.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.111-121
• /
• 2022

It has been reported that current amount of coal ash remains almost 100 million tons and 5.85 million tons of blast furnace slag are generated annually in Vietnam. Vietnam government has encouraged the industries to increase the use of coal ash and blast furnace slag as construction materials as well as in cement production institutionally. However, limited can be applied in the construction field yet. Therefore, in this study, basic performance analysis on five different kinds of fly ash from Vietnam was conducted. In addition, the performances of blast furnace slags generated in Vietnam and Korea were compared and evaluated. Soil stabilizer compressive strength test and solidified soil unconfined compressive strength test were conducted as the basic data for the development of soil stabilizer applied to the soil mixing method using fly ash and blast furnace slag generated in Vietnam. The results showed that the Vietnamese fly ash and blast furnace slag can be used as the raw materials for soil stabilization and improvement.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.1
• /
• pp.10-14
• /
• 1994

The slowly released potassium fertilizer was developed by mixing fly ash with KOH, anthracite coal powder, KCI, $K_2CO_3$ and $Mg(OH)_2$ as the substances for accelerating calcination. Measuring proper ratios of raw materials, we found that the anthracite coal powder was 12 percent and $Mg(OH)_2$ was two to three percent. The optimal calcination temperature and time were proved to be $850^{\circ}C$ and 30 minutes, respectively, however, the trial product with lower temperature and shorter time in calcination had low quality. The K solubility of the product was very low compared to that of the KCl fertilizer.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.21-22
• /
• 2019

In order to prevent global warming according to fossil fuel use, countries around the world are making efforts through the Kyoto Protocol and the Paris Climate Change Convention. In addition, in order to prepare for high oil prices, researches such as the development of various renewable energy are being conducted. At present, the domestic production rate of energy sources in Korea is low at 18.1%, and power plants using forest biomass are being constructed to meet the domestic situation where 63% of the land is a forest. In 2015, the global production of wood pellets, a raw material for wood-based biomass power generation, was 28 million tons, up 7.7% from 2014, and has increased tenfold over the last decade. This is a result of increased demand for biomass. Korea is also increasing every year. However, biomass fly ash, an industrial by-product generated by biomass energy generation, is now being disposed of entirely, and there is little research to utilize it. Therefore, this paper will use biomass fly ash, an industrial by-product, which is currently being discarded due to a lack of separate treatment methods, as an admixture concept to contribute to solving environmental problems, developing new admixtures, improving quality, and seeking recycling plans.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.324-330
• /
• 2019

To recycle raw fly ash (RFA), a waste from thermal power plants, it was used to prepare solid catalysts which have many advantages compared with homogenous catalysts. When biodiesel was produced from soybean oil using RFA, only 1.2% of biodiesel conversion was obtained. A metal hydroxide, NaOH, KOH or $Ca(OH)_2$, was mixed with the acid-treated fly ash (ATFA), and the mixture was calcined at $700^{\circ}C$ for 3 h to prepare the solid catalyst. The solid catalyst prepared by mixing ATFA with NaOH, designated as SC-Na, showed a better performance than those prepared by mixing ATFA with KOH or $Ca(OH)_2$, respectively. The optimal mass ratio of ATFA with NaOH was 1:3, at which the proportion of $Na_2O$ increased to 60.2% in SC-Na, and 97.8% of biodiesel conversion was achieved under optimal reaction conditions (2 w% SC-Na relative to oil and 5 mL-methanol/g-oil at $50^{\circ}C$ for 4 h). Finally, a batch operation was repeatedly carried out to test the feasibility of reusing the solid catalyst, and more than 96% biodiesel conversion was stably achieved for the third round of operations. This study shows that RFA was successfully recycled to solid catalysts through a simple preparation method, and the solid catalyst was reused for the production of biodiesel with high conversion.