• Journal of the Korean Statistical Society
• /
• v.17 no.1
• /
• pp.46-55
• /
• 1988

Two-piece double exponential distribution (TPDE) with one piece $(X \leq 0)$ having the scale parameter $\theta_1$ while the other piece (X>0) having $\theta_2$ is considered here. Distribution of the sum of n-independent variables from such a distribution is obtained. Special cases of this distribution are also treated. Next, distribution of the ratio of two independent (TPDE) variables is derived. As an extension, distribution of $x_1/x_2x_3$ is expressed terms of hypergeometric functions. A small table gives the power of the test regarding double exponential against (TPDE).

• Health Policy and Management
• /
• v.27 no.1
• /
• pp.30-38
• /
• 2017

Background: This study aims to analyze the behavioral changes of healthcare providers and influencing factors after the reviewer unification of auto insurance medical benefit claims by an independent review agency. Methods: The comparison data were collected from the second half of 2013 and the same period of 2014. The key indicators are the number of admission days, the number of outpatient visits, inpatient ratio, inpatient medical expenses, and outpatient medical expenses. Results: Four indicators (number of admission days, number of outpatient visits, inpatient ratio, and outpatient medical expenses) showed statistically significant drops, while one indicator (inpatient medical expenses) showed no significant change. Conclusion: The reviewer unification of auto insurance medical benefit claims by an independent review agency showed significant reduction in cost and patient days.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.4
• /
• pp.79-86
• /
• 1997

An electro-optic polymer digital optical switch with rib waveguides is designed and fabricated by using the RIE method. POlarization-independent and wavelength-insensitive operation is demonstrated at the wavelengths of 1.3mm and 1.55mm, for the first time in electro-optic polymer-based devices. The rib waveguides have been designed to achieve good guiding properites for both TE and TM polarizations by controlling the etching depth as well as its aspect ratio. Especially theetching depth is controlled to change the guided mode profiles of the rib waveguide and thus to achieve an optimum coupling in the branch. The measured crosstalk is better than -16dB and the extincton ratio of each output port is greater than 16dB.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.3
• /
• pp.73-80
• /
• 2022

Unlike the CFT retrofit method, The EPFT retrofit method, which fills the steel tube with engineering plastic, does not require a separate concrete forming work and is a lightweight seismic Retrofit Method. In this study, an prototype model of the EPFT was proposed, and to analyze the seismic performance, an independent specimens and a reinforced concrete column were fabricated to conduct a seismic performance test. As a result of loading test of the independent specimens, the strength was increased compared to the steel tube column without internal filling, and the ductility ratio did not significantly increase due to the falling off of the weld. As a result of loading test of the concrete reinforcement specimen, the strength, ductility ratio, and energy dissipation were increased, and the number of cracks by loading step decreased compared to the non-reinforced specimen.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.193-200
• /
• 2012

The purpose of this study was to investigate the consumer sensibility according to the arrangement and area-ratio of a stripe, and the necktie width. The experimental materials developed for this study were a set of stimuli and necktie sensibility scales. The stimuli were 27 color pictures, in which the necktie width(narrow, medium, wide), stripe arrangement(horizontal, vertical, oblique), and stripe area-ratio(1:1, 1:2, 1:3) were manipulated. The 7-point scale was used for the consumere sensibility. Data were obtained from 270 men and women in their 20s and 30s living in Seoul, Gwangju, Daegu, Jinju, and Changwon on November 2011. For the data analysis, ANOVA and Duncan-test were used by using SPSS program. Results of this study were as follows.; The factors of consumer sensibility according to the arrangement and area-ratio of a stripe, and the necktie width consisted of five dimensions of attractiveness, grace, individuality, ability, and activity. The necktie width showed an independent effect on attractiveness and grace. The stripe arrangement showed an independent effect on attractiveness, grace, individuality, and ability. The stripe area-ratio showed an independent effect on grace. Also, interaction effects of the necktie width and stripe area-ratio on ability were found. The study results are highly expected to be used as valuable sources in plans for necktie products.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.485-492
• /
• 2001

Weathered soil is one of the most representative soils in Korea. In this study, a series of cyclic triaxial tests was carried out to predict the post-cyclic deformation behavior of weathered soils in case of non-liquefaction. Excess pore pressure response during cyclic loading and volumetric strain during the dissipation of excess pore pressure were measured varying the confining pressure, relative density and cyclic stress ratio. Based on the test results, it Is found that the modified excess pore pressure ratio, excess pore pressure ratio normalized by cyclic stress ratio, is uniquely correlated with the number of cycles irrespective of confining pressure and cyclic stress ratio. Using the newly proposed MEPPR(modified excess pore pressure ratio) concept, it is possible to easily evaluate the excess pore pressure and the settlement of weathered soils due to cyclic loading by greatly reduced number of tests. It is also verified that the reconsolidation volumetric strain is independent of the way how the excess pore pressure was generated.

• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.791-796
• /
• 1997

The influence of Ti/Sr ratio on abnormal grain growth of Nb-doped SrTiO3 was investigated. For specimens which were isothermally sintered at temperatures above 144$0^{\circ}C$, the nucleation and growth rates of abnormal grain growth were decreased with increasing Ti/Sr ratio. But the onset time of abnormal grain growth was increased with increasing Ti/Sr ratio. The cross-section of abnormally grown grains was mostly hexagonal. When the specimens were quenched in air after they reached their setting temperatures at a heating rate of 3$^{\circ}C$/min, the onset temperature of abnormal grain growth was increased with increasing Ti/Sr ratio and the final grain size was independent of Ti/Sr ratio. The cross-section of abnormally grown grains was mostly rectangular.

• The Journal of Korean Medicine
• /
• v.24 no.4
• /
• pp.1-5
• /
• 2003

Leptin has a close correlation with obesity, which is known to be a major factor for stroke. This study was performed to determine whether serum leptin level would be an independent risk factor for stroke and whether it would change significantly early after stroke. Subjects were selected from those within I month after onset and non-stroke referents at Kyung Hee Oriental Medical Center in Seoul, Korea. We compared leptin and the other characteristics between stroke subjects and referents. Body mass index, hypertension history, presence of drinking and smoking, waist/hip ratio, total cholesterol and triglyceride were recorded. To assess odds ratio of leptin for stroke, we used logistic regression analysis. Leptin was rechecked 2 weeks later and compared with the former value in acute stroke subjects. In this study, serum leptin did not differ significantly between stroke subjects and referents, and its odds ratio was not significant in male (OR=0.52, 95％ Cl; 0.13-2.08) and female (OR=1.57, 95％ Cl; 0.53-4.67). In acute stroke subjects, leptin did not change significantly 2 weeks later. Hypertension had a significant odds ratio in male (OR=3.39, 95％ Cl; 1.02-11.24) and female (OR=12.37, 95％ Cl; 3.67-41.65). High waist/hip ratio was only in female (OR=6.70, 95％ Cl; 1.73-26.02). In conclusion, leptin was not an independent risk factor for stroke and its serum level did not change significantly early after stroke. Hypertension and waist/hip ratio had significant relative risks.

• Korean journal of food and cookery science
• /
• v.23 no.4 s.100
• /
• pp.551-560
• /
• 2007

This study was performed to determine the optimum ratio of ingredients in the Sulgidduk with barley(Hordeum vulgare L.) sprout powder. A mathematical analytical tool was employed for optimization of the typical ingredients. The canonical form and trace plot showed the affect of each ingredient in the mixture against the final product. Mixture design showed 14 experimental points, including 4 replicates for three independent variables. The three independent variables selected for the experiment were: water($15{\sim}22%$), barley sprout powder($1{\sim}4%$), and sugar($12{\sim}19%$). The optimum responses variables such as color values(L, a, and b), instrumental texture parameters(hardness, gumminess, and chewiness), and sensory characteristics(appearance, color, smell, taste, softness, moistness, and overall acceptability) were evaluated. The Hunter colorimetric L- and a-values of the Sulgidduk decreased with an increasing amount of barley sprout powder. As more barley sprout powder was added, a higher b-value resulted. Textural hardness, gumminess, and chewiness were lowered by the addition of barley sprout powder. The optimum formulation obtained by both numerical and graphical methods showed similar results. The representative optimal ingredient ratio commonly obtained by both methods were: 18.2% water, 2.0% barley sprout powder, and 14.8% sugar.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.159-166
• /
• 2009

In this paper, we analyse the noise robustness of MLPs(Multilayer perceptrons) through deriving the probability density function(p.d.f.) of output nodes with additive input noises and the misclassification ratio with the integral form of the p.d.f. functions. Also, we propose linear preprocessing methods to improve the noise robustness. As a preprocessing stage of MLPs, we consider ICA(independent component analysis) and PCA(principle component analysis). After analyzing the noise reduction effect using PCA or ICA in the viewpoints of SNR(Singal-to-Noise Ratio), we verify the preprocessing effects through the simulations of handwritten-digit recognition problems.