• 생태와환경
• /
• 제37권2호통권107호
• /
• pp.213-226
• /
• 2004

본 연구에서는 엽록소 a 농도와 저수지의 수심을 토대로 유형을 분류하고 각 유형에서의 수질특성을 평가하였다. 486개의 저수지를 대상으로 엽록소 a 농도 25 ${\mu}g\;L^{-1}$와 수심 7.5m를 기준으로 4가지 유형으로 분류하였다. 각 호수에서의 연평균 최대 엽록소 a 농도를 기초로 OECD와 TSI 기준에 따라 평가 시 각각 34.3%와 72.8%가 부영양상태였다. 엽록소 a 농도 25 ${\mu}g\;L^{-1}$를 기준으로 구분된 유형들에서 총질소 농도(2배) 보다는 총인 (4배)의 농도차이가 크게 나타났다. TN/TP비를 토대로 할 때 인이 제한 영양염으로 나타났고, 영양상태가 높은 저수지들에서 인에 대한 제한정도가 큰 것으로 나타났다. 엽록소 a 농도가 가장 높은 TYPE II에 포함된 저수지는 상대적으로 노후된 시설이 많고 DA/LA비가 작으며 체류시간이 길고 유역 내 논과 밭으로 이용되는 면적이 넓고 유역에서 발생하는 오염부하가 많았다. 비록 유역면적이 유역내에서의 오염물질 발생부하량과 관련된 요인으로 고려될 수 있으나 수질과의 뚜렷한 상관성이 없었다. 본 연구에서 수심이나 시설물의 노후정도와 같은 형태학적인 특성과 더불어 유역 내의 토지이용형태는 저수지의 수질을 결정하는 매우 주요한 인자로 나타났고 수질 특성을 평가함에 있어 효과적인 인자로 제시되었다.

• 소성∙가공
• /
• 제18권7호
• /
• pp.538-543
• /
• 2009

The cowl cross bar of an automobile is a frame component that is installed inside the cockpit module to provide a guide surface, to which functional components for electricity and air condition are attached. In the recent years, the geometries of cowl cross bars are getting more complex in order to meet the demands of a wide variety of embedded functional components and the reduced weight of frame parts with enhanced mechanical and noise/vibration characteristics. There for, welding processes between tubes with different diameters are widely conducted while the welded parts are experiencing various problems such as undermined appearance, low production efficiency and poor mechanical characteristics. Therefore, this paper seeks to develop an one-piece forming process which eliminate welding process for the cowl cross bar by applying the tube drawing process. However, it was predicted that a conventional tube drawing can not be applied directly to the current part since the area reduction ratio of the drawing process reaches 51.7% which exceeds the general limiting value. Therefore, in this study, a combined drawing process which adds a compressive force to a tensile force of the conventional drawing process was proposed and 2-stage drawing process was designed by using CAE analyses. In addition, drawing tryouts were carried out by using the manufactured combined drawing machine in order to verify the designed process.

• 공업화학
• /
• 제34권5호
• /
• pp.548-555
• /
• 2023

SAPO-34 catalysts were modified with polyethylene glycol (PEG) and Pb to improve their catalytic lifetime and selectivity for light olefins in the conversion of dimethyl ether to olefins (DTO). Hierarchical SAPO-34 catalysts and PbAPSO-34 catalysts were synthesized according to changes in the molecular weight of PEG (M.W. = 1000, 2000, 4000) and the molar ratio of Pb/Al (Pb/Al = 0.0015, 0.0025, 0.0035), respectively. By introducing PEG into the SAPO-34 catalyst crystals, an enhanced volume of mesopores and reduced acidity were observed, resulting in improved catalytic performance. Pb was successfully substituted into the SAPO-34 catalyst frameworks, and an increased BET surface area and concentration of acid sites in the PbAPSO-34 catalysts were observed. In particular, the concentrations of the weak acid sites, which induce a mild reaction, were increased compared with the concentrations of strong acid sites. Then, the P2000-Pb(25)APSO-34 catalyst was prepared by simultaneously utilizing the synthesis conditions for the P2000 SAPO-34 and Pb(25)APSO-34 catalysts. The P2000-Pb(25)APSO-34 catalyst showed the best catalytic lifetime (183 min based on DME conversion > 90%), with an approximately 62% improvement compared to that of the unmodified catalyst (113 min).

• Journal of Chest Surgery
• /
• 제24권3호
• /
• pp.253-260
• /
• 1991

The adequacy of anticoagulation with heparin during cardiopulmonary bypass, and precise neutralization with protamine at the conclusion of cardiopulmonary bypass, were important. In sixty children undergoing cardiopulmonary bypass, ACT and heparin dose-response curve were studied. Total dose of heparin before bypass were 2.80$\pm$0.74 mg/kg and the amount of protamine administered after bypass were 3.0$\pm$1.23 mg/kg. So protamine: heparin ratio was 1.07: l.c After administration of protamine which dose is calculated with heparin dose-response curve, ACTs were returned to normal range[mean 114.8 $\pm$13 second]. The heparin sensitivity and its half-life do not have relationship with age, weight, height, surface area and urine amount during operation. And there are too much individual variations in heparin sensitivity and its half-life. So conventional heparin protocols can overestimate or underestimate the amount of heparin and protamine. Heparin dose-response curve makes it possible to maintain anticoagulation in a safe range during bypass with adequate amount of heparin individually. At the conclusion of bypass, this curve can be used to predict the precise amount of protamine amount of protamine needed for neutralization of the heparin. But heparin dose-response curve to be used clinically, further studies will be needed about relationship between ACT and heparin level in the high range, influence of hemodilution and hypothermia to ACT and discrepancy between true adequate amount of protamine and calculated amount by heparin dose-response curve.

• 한방재활의학과학회지
• /
• 제24권3호
• /
• pp.29-37
• /
• 2014

Objectives Osteoporosis is an impending problem in the rapidly aging society. The purpose of this study is to identify the effects of Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) on osteoporosis induced by ovariectomy in rats. Methods 24 rats were randomly assigned to a SHAM group, a control group, and a Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group (n=8). Ovaries were extracted and for 8 weeks, the rats were given dry feeds and Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group were given a mixture of dry feeds and Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$). At 8 weeks, their body weight, femur mass, tibia ash per body ratio, overall surface area and thickness of the trabeculae, overall surface area of the osteoblasts, and the number of osteoclasts were measured and levels of albumin, aspartate transaminase (AST), alanine transaminase (ALT), alkaline phosphatase (ALP), total-cholesterol, calcium and estradiol were recorded. Results There was no significant difference in the weight of the femur and the tibia ash per body ratio. The Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group had significantly thicker trabeculae than the control group and showed a minimal increase of overall surface area of the trabeculae. The overall surface area of the osteoblasts and the number of osteoclasts decreased in the Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group. There were no statistically significant differences in AST, ALT, ALP, total cholesterol, phosphorus, and estradiol levels. On the contrary the Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group had significantly higher levels of Albumin, triglyceride, and calcium. Conclusions It can be concluded that oral intake of Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) prevents the thinning process of the trabeculae. Thus, it may have positive effects on the treatment and prevention of osteoporosis in postmenopausal women.

• 한국입자에어로졸학회지
• /
• 제11권4호
• /
• pp.107-113
• /
• 2015

SBA-16 (Santa Barbara Amorphous) was synthesized over supported $TiCl_4/MgCl_2$. Due to its high surface area and excellent morphological performance, it was expected to form the bi-supported catalytic system and be used for ethylene polymerization. Polymerization of ethylene was carried out at atmospheric pressure using hexane as solvent and triethylaluminium as cocatalyst. ICP, FTIR, DSC, TG-DTA were used to characterize polyethylene and catalyst product. Optimum conditions for ethylene polymerization were found to be 100 mL hexane, Al/Ti molar ratio of 160 and 1 h polymerization at $60^{\circ}C$. The activity of 396.76 kg PE/mol Ti.h.atm was achieved. Melting point of the obtained polymer was in the range of $132-135^{\circ}C$ and the highest degree of crystallization was 46%.

• 동의생리병리학회지
• /
• 제34권4호
• /
• pp.209-214
• /
• 2020

The association of cold-heat (CH) pattern and anthropometry/body composition has been suggested in that they are related to thermoregulation. We aimed to study the association of CH pattern and anthropometry/body composition. A total of 1479 individuals aged 50-80 years were included in the study, and their CH pattern were evaluated by a self-administered questionnaire. After adjustment for age and sex, the CH score were significantly correlated with weight, BMI (body mass index), body surface area, waist-hip ratio, fat free mass, body fat mass, body cell mass, intracellular water, extracellular water, and basal metabolic rate; however, the correlation coefficients were mostly low (0.15-0.24). The selected variables for predicting CH score were various according to the methods used for variable selection; however, the adjusted R-squared of the final models were all around 0.12. Thus the most parsimonious model could be the one that includes sex and BMI. In conclusion, various anthropometry and body composition indices were associated with CH pattern. Future studies are necessary to improve the performance of the prediction model.

• 한국안전학회지
• /
• 제29권5호
• /
• pp.15-21
• /
• 2014

The aim of this work is conduct the study on light weight and structural performance improvement of the composite wind power blade. GFRP (Glass Fiber Reinforced Plastic) pre-empted by CFRP(Carbon Fiber Reinforced Plastic), the major material of wind power blade, was identified the superiority of mechanical performance through the tensile and fatigue test. SENT(Single Edge Notched Tension) specimen fracture test was conducted on the specimen that laminated together 2 ply CFRP with 4 ply GFRP through DIC(Digital Image Correlation) analysis. The SENT specimen thickness and $a_0/W$ ratio is 1.45 mm and 0.2, respectively. The fracture test accomplished with displacement control with 0.1 mm/min at the room temperature. The experimental apparatus used for the fracture test consisted of a 50kN universal dynamic tester and CCD camera connected to a personal computer (PC), which was used to record images of the specimen surface. Following data acquisition, the images and load-displacements were transferred to the PC, on which the DIC software was implement. The experiment and DIC analysis results show that CFRP/GFRP laminated composite exhibits improvement of the strength, compared with that of the existing blade material. This study shows the result that the strength of CFRP rotor blade of wind turbine satisfies through the experimental and DIC method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.102-108
• /
• 2006

On the refutation demanded for a control of various toxic substances. PCBs(poly chlorinated biphenyl) has a fatal poisonous matter in the ecosystem and the environmental pollution as it Is a kind of stable chemical substance. Especially, the gross Product of PCBs is estimated at about one million tonnage all over the world. However it is kept on storing in untreated state, then has a deterioration by the Prolonged storage and a risk of overflowing. Therefore, this research examined the fundamental characteristics of combustion and emission for the target of using the IPA (iso-propyl alcohol) solution as a part of PCBs control. IPA was filled to three kinds of Vessel, i.e. Vessel I, II, and III, and then was investigated as follows combustion shape, flame temperature. mass burning velocity, and PM(Particulate matter). A radial thermometer and a C-A thermocouple measured the flame temperature, and the optical extinction method by using He-Ne laser and the filter weight method used in the PM measurement. As a result, with an increasing of L/S ratio, the flame length become shorter and the burning velocity is more rapid, but the particulate matters is higher. It is supposed that the air flow rate is high on Vessel. and then the combustion is Promoted in the surface area of the upstream zone. The future works plan to investigate the characteristics with an using of the mixing of IPA and PCBs

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권1호
• /
• pp.54-60
• /
• 2001

A study was conducted to assess the nutritive value of two diets based on a low-energy variety of wheat, RAC C1 and their effects on intestinal mucosal structure and function in broiler chickens. The diets were fed with or without microbial enzyme supplement to male and female broiler chickens. The digesta viscosity was reduced (p<0.001) through supplementation with a microbial enzyme in male and female chicks. Enzyme supplementation also improved the dietary apparent metabolizable energy content (p<0.001) and had slight but non-significant positive effects on chick growth and feed conversion ratio. Intestinal mucosal structure and enzyme function were not affected by microbial enzyme supplement. Male chicks consumed more feeds (p<0.001), attained higher final body weight (p<0.001) and were more efficient at feed utilization (p<0.01) than the female chicks. Except for duodenal villus surface area and ileal protein content, intestinal mucosal structure and enzyme activities were similar between the two sexes and dietary treatment groups. The study showed an improvement in the nutritive value of the diets in the presence of the microbial enzyme supplement.