• 농약과학회지
• /
• 제8권1호
• /
• pp.30-37
• /
• 2004

우리나라에서 가장 널리 재배되는 토마토 과종인 방울토마토와 완숙토마토를 시설하우스에서 재배하여 두 과종 간에 비표면적을 측정하였으며, 농약의 잔류량을 분석하여 비표면적과 농약 잔류량과의 상관 관계를 조사하였다. 완숙된 토마토의 비표면적은 방울토마토가 $2.15cm^2g^{-1}$, 완숙토마토가 $1.00cm^2g^{-1}$로써 방울토마토의 비표면적이 약 2배 더 컸다. 농약의 물리화학적 성질과 제형이 다른 4종의 농약(타로닐 수화제, 크로로타로닐 액상수화제, 옥사딕실 쿠퍼 수화제, 지오판 수화제)을 선발하여 농약 잔류량을 측정한 결과, 방울토마토의 농약 잔류량이 완숙토마토보다 살포일수 및 살포횟수에 관계없이 $1.4\sim2.4$배 정도 많이 잔류되었다. 이러한 결과로 토마토 과종간의 비표면적의 비와 농약 잔류량이 상관성이 있는 것으로 확인되었으며, 농약살포 후 최종 수확 때까지 토마토의 비대생장이 없었기 때문에 농약 잔류량은 비표면적이 주된 인자로 작용한 것으로 보인다.

• 농업과학연구
• /
• 제45권2호
• /
• pp.265-282
• /
• 2018

The purpose of this research was to produce symmetric (Saturated-Unsaturated-Saturated, SUS) triacylglycerol (TAG) using palm stearin fraction oil (PSFO) and high oleic sunflower oil (HOSO) as substrates to replace cocoa butter. PSFO was blended with HOSO (1 : 2 weight ratio), and $lipozyme^{(R)}$ TLIM (20 weight % of the substrate) was added. Interesterification was carried out in a shaking water bath at $55^{\circ}C$ at 220 rpm for 6 hours. The response surface methodology (RSM) through the central composite face design was employed to observe the optimized SUS-TAG. The independent factors were the reaction temperature ($X_1$: 65, 75 and $85^{\circ}C$), reaction time ($X_2$: 1, 3 and 5 hours) and ratio of TLIM ($X_3$: 10, 15 and 20 weight %). The dependent variables were $Y_1$ = Saturated-Unsaturated-Unsaturated (SUU, area %), $Y_2=SUS$ (area %), $Y_3$ = Saturated-Saturated-Unsaturated (SSU, area %), $Y_4$ = Unsaturated-Unsaturated-Unsaturated (UUU, area %), and $Y_5=sn-2$ unsaturated fatty acid (area %). The optimal conditions from the central composite face design minimized acyl migration while maximizing the presence of unsaturated fatty acid at the sn-2 position (73.43 area %). The optimal conditions were $X_1=65^{\circ}C$, $X_2=1hour$, and $X_3=20weight%$. As a result of the response surface analysis, the lack of fits was found as $Y_1=0.622$, $Y_2=0.438$, $Y_3=0.264$, $Y_4=0.526$, and $Y_5=0.215$, and their $R^2$ were 0.897, 0.944, 0.826, 0.857, and 0.867, respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.86-89
• /
• 2003

It is recognized that reinforcement corrosion is the main distress behind the present concern regarding concrete durability. In this study, to confirm corrosion of reinforced concrete affected by thickness of cover, kinds of surface coating, measured electric potential, ratio of corrosion area, weight reduction, corrosion velocity of steel bar under environment of complex deterioration. The results showed that an increase in age also increases corrosion of steel bar. Ratio of corrosion area is largely related to ratio of weight reduction. as well, corrosion of steel bar by thickness of cover is superior to l0mm thick than 20mm thick. It showed that an increase in thickness of cover prevent steel bar from deteriorating. The results of this study showed that corrosion velocity was affected by thickness of cover, kinds of surface coating. data on the development of corrosion velocity made with none, organic B, organic A, inorganic B, and inorganic A is shown.

• 상하수도학회지
• /
• 제25권2호
• /
• pp.249-255
• /
• 2011

It is complicate problem to optimize removing natural organic matter (NOM) by activated carbon in drinking water treatment because the activated carbon has heterogeneous surface area and pore structure. Seven different coals based activated carbons which have different pore structures were used in the study. Sand filtered effluents which normally used as GAC adsorber influent were used. The molecular weight distribution showed that most of the NOM was bigger than 10,000Da. In this study, systematical approaches such as characteristics of surface area and pore volume were evaluated on NOM adsorption. Especially, the adsorption capacities for NOM were evaluated by effect of micro-pores and meso-pores in surface area and pore structure. The results show that the higher ratio of meso-pore compare to the micro-pore has not only the better adsorption capacities for NOM but also the higher strongly-adsorbable fraction. Therefore, the overall adsorption capacity is increased with higher meso-pore ratio with existing of reasonable micro-pore surface area and volume.

• 한국연초학회지
• /
• 제5권2호
• /
• pp.33-38
• /
• 1983

향끽미종잎담배인 소향의 시비량을 달리하여 엽면수지량과 생육형질과의 관계를 조사한 바, 주당 및 단위 엽면적당의 엽면수지량은 질소수준간에 유의차를 보여 3k9/ 10a수준에서 많았고 인산 및 가리의 영향은 유의성이 인정되지 않았다. 주당엽면적수지량은 초장. 최대영장과 폭. 주당건엽중 및 생명중과 평균엽면적 과는 각각 정 (+). 엽후와는 부(-)의 상관이 나타났다. 단위엽면적당 엽면수지량은 단위엽면적중 및 건물율과는 정 (+), 평균엽면적과는 동일 질소수준에서 부(-)의 상관이 나타났다.

• 한국추진공학회지
• /
• 제5권3호
• /
• pp.100-107
• /
• 2001

Miro propulsion device is a literally very small propulsion system The reason why such a small propulsion system is required is that micro satellites are considered as substitutions for conventional satellites to reduce cost; the fabrication of micro satellites enables us to produce mass production Microrockets have relatively high values of thrust/weight ratio due to the cube law; weight is proportional to volume and thrust is proportional to area. Accordingly, downsizing makes the ratio of thrust/weight ratio high However, conventionally ignorable facts are not negligible any more in small scale systems. for chemical micro rockets, downsizing causes lots of heat loss as surface to volume ratio increases, which results in the destruction of radical ions. For thrusters using plasma, the generation of strong magnetic field for plasma is very difficult. Also, in the aspect of flow dynamics, the effects of drag and viscosity are important parameters in low Re flows. When these problems are solved, micro propulsion systems can be commercialized and result in spin-off effects in many fields.

• Carbon letters
• /
• 제10권3호
• /
• pp.217-220
• /
• 2009

In this study, porous electrospun carbon fibers were prepared by electrospinning with PAN and $MgCl_2$, as a MgO precursor. MgO was selected as a substrate because of its chemical and thermal stability, no reaction with carbon, and ease of removal after carbonization by dissolving out in acidic solutions. $MgCl_2$ was mixed with polyacrylonitrile (PAN) solution as a precursor of MgO with various weight ratios of $MgCl_2$/PAN. The average diameter of porous electrospun carbon fibers increased from 1.3 to 3 ${\mu}m$, as the $MgCl_2$ to PAN weight ratio increased. During the stabilization step, $MgCl_2$ was hydrolyzed to MgOHCl by heat treatment. At elevated temperature of 823 K for carbonization step, MgOHCl was decomposed to MgO. Specific surface area and pore structure of prepared electrospun carbon fibers were decided by weight ratio of $MgCl_2$/PAN. The amount of hydrogen storage increased with increase of specific surface area and micropore volume of prepared electrospun carbon fibers.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.498-503
• /
• 1995

The adsorption behaviors of two major components purified, endo Ⅱ and exo Ⅱ, from Trichoderma viride were investigated using microcrystalline cellulose with different specific surface area as substrates. Adsorption was found to apparently obey the Langmuir isotherm and the thermodynamic parameters, ΔH, ΔS, and ΔG, were calculated from adsorption equilibrium constant,K. The adsorption process was found to be endothermic and an adsorption entropy-controlled reaction. The amount of adsorption of cellulase components increased with specific surface area and decreased with temperature and varied with a change in composition of the cellulase components. The maximum synergistic degradation occurred at the specific weight ratio of the cellulase components at which the maximum affinity of cellulase components obtains. The adsorption entropy and enthalpy for respective enzyme system increased with specific surface area increase. The adsorption entropy was shown to have a larger value with enzyme mixture.

• 한국식품영양학회지
• /
• 제17권2호
• /
• pp.220-228
• /
• 2004

Tenax-TA와 동적 headspace 향 포집방법을 이용하여 볶음들기름의 향기성분을 농축하였다. 이때 반응표면분석법을 이용하여 Tenax-TA에 결합한 향기성분의 탈착에 의한 손실을 최소화하고 휘발성이 낮은 화합물의 포집 효율을 극대화시키는 최적조건을 결정하였다. 독립변수로 향 포집 온도와 시간 및 시료량을 설정하였고 총 peak 면적, 탈착율, 휘발성이 가장 낮은 화합물인 perilla ketone의 면적을 종속변수로 하였다. 등고선 그림을 겹친 결과 0.6 g의 볶음들기름을 48$^{\circ}C$에서 12분 동안 포집시키는 것이 최적조건이었으며 Tenax-TA에서 탈착되는 주요한 휘발성 화합물은 2-propanone, 2-butanone, acetic acid 및 2-methyl propanal이었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권8호
• /
• pp.334-340
• /
• 2006

Copper is widely used in electric wire, cable, conductor in electric devices. As the demand for electric power is increasing rapidly, electric power devices are getting amazingly bigger and complicated. The using of light-weight conductor can reduce the size and making cost of the electric devices. In high-frequency application, Electric current in a conductor tends to shift to the surface of the conductor, resulting in an uneven current distribution in the inner conductor. In the extreme case the current may essentially concentrate in the 'skin' of the inner conductor as a surface current. In high frequency application, therefore, inner area of copper conductor may replace with aluminum conductor, which reduces the weight of conductor. This paper describes the manufacture and evaluation of composite conductors made of copper and aluminum. The optimum extruding ratio was 16 at $300^{\circ}C$. The electrical resistance of manufactured composite bus bar was $57{\mu}{\Omega}$ at DC and $49.5{\mu}\{Omega}$ at 300Hz.