• 한국정보처리학회논문지
• /
• 제4권1호
• /
• pp.177-183
• /
• 1997

비 중심t분포의 누적함수는 두 정규모집단에서 모평균의 동일성 검정에서 검정력 계산 및 모 평균에 대한 표준편차의 비에 대하여 신뢰구간을 계산할 때 요구된다. 본 논문에서는 비중심t분포의 누적함수 계산에 신경망 이론을 적용하였다. 신경망은 다 층 퍼셉트론이며 학습과정은 역전파 학습알고리즘이다. Fisher가 제시한 확률값과 신 경망이론에 의하여 계산한 결과를 비교하였다.

• The Korean Journal of Pain
• /
• 제30권4호
• /
• pp.243-249
• /
• 2017

Pain is subjective, while statistics related to pain research are objective. This review was written to help researchers involved in pain research make statistical decisions. The main issues are related with the level of scales that are often used in pain research, the choice of statistical methods between parametric or nonparametric statistics, and problems which arise from repeated measurements. In the field of pain research, parametric statistics used to be applied in an erroneous way. This is closely related with the scales of data and repeated measurements. The level of scales includes nominal, ordinal, interval, and ratio scales. The level of scales affects the choice of statistics between parametric or non-parametric methods. In the field of pain research, the most frequently used pain assessment scale is the ordinal scale, which would include the visual analogue scale (VAS). There used to be another view, however, which considered the VAS to be an interval or ratio scale, so that the usage of parametric statistics would be accepted practically in some cases. Repeated measurements of the same subjects always complicates statistics. It means that measurements inevitably have correlations between each other, and would preclude the application of one-way ANOVA in which independence between the measurements is necessary. Repeated measures of ANOVA (RMANOVA), however, would permit the comparison between the correlated measurements as long as the condition of sphericity assumption is satisfied. Conclusively, parametric statistical methods should be used only when the assumptions of parametric statistics, such as normality and sphericity, are established.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.197-200
• /
• 2012

Concrete has cracks from shrinkage that necessarily result from in hardening process. Shrinkage-reduced concrete developed for crack reduction was utilized at a sample construction project. As a result, it is confirmed that crack initation ratio was remarkably reduced when compared to the case of normal concrete utilization. Additional sample project is supposed to use delay joints as well as srinkage-reduced concrete. Subsequently, the result will be reported. The greatest factor which affects in drying shrinkage is unit quantity of water. However, there are a lot off difficulties in field supervision because proper measuring means is not presented in present standard. Therfore, problems depending on ready-mixed concrete concrete companies should be improved by preparing the related standard assoon as possible.

• Journal of the Korean Statistical Society
• /
• 제36권4호
• /
• pp.489-500
• /
• 2007

In this paper, we consider Bayesian approach to the Fieller-Creasy problem using noninformative priors. Specifically we extend the results of Yin and Ghosh (2000) to the unbalanced case. We develop some noninformative priors such as the first and second order matching priors and reference priors. Also we prove the posterior propriety under the derived noninformative priors. We compare these priors in light of how accurately the coverage probabilities of Bayesian credible intervals match the corresponding frequentist coverage probabilities.

• International Journal of Korean Welding Society
• /
• 제1권2호
• /
• pp.18-22
• /
• 2001

The stress intensity factor has been calculated theoretically for the cracked plate subjected to remote normal stress and reinforced with a plate by symmetric seam welding. The singular integral equation was derived based on displacement compatibility condition between the cracked plate and the reinforcement plate, and solved by means of Erdogan and Gupta's method. The results from the derived equation for stress intensity factor were compared with FEM solutions and seems to be reasonable. The reinforcement effect gets better as welding line is closer to the crack and the stiffness ratio of the cracked plate and the reinforcement plate becomes larger.

• Steel and Composite Structures
• /
• 제34권1호
• /
• pp.17-34
• /
• 2020

This paper investigates the flexural behavior of concrete beams reinforced longitudinally with either steel bars, molded glass-fiber reinforced polymer (GFRP) grating mesh or pultruded glass-fiber reinforced polymer (GFRP) grating mesh, under four-point bending. The variables included in this study were the type of concrete (normal weight concrete, perlite concrete and vermiculite concrete), type of the longitudinal reinforcement (steel bars, molded and pultruded GFRP grating mesh) and the longitudinal reinforcement ratio (between 0.007 and 0.035). The influences of these variables on the load-midspan deflection curves, bending stiffness, energy absorption and failure modes were investigated. A total of fifteen beams with a cross-sectional dimension of 160 mm × 210 mm and an overall length of 2400 mm were cast and divided into three groups. The first group was constructed with normal weight concrete and served as a reference concrete. The second and third groups were constructed with perlite concrete and vermiculite concrete, respectively. An innovative type of stirrup was used as shear reinforcement for all beams. The results showed that the ultimate load of the beams reinforced with pultruded GFRP grating mesh ranged between 19% and 38% higher than the ultimate load of the beams reinforced with steel bars. The bending stiffness of all beams was influenced by the longitudinal reinforcement ratio rather than the type of concrete. Failure occurred within the pure bending region which means that the innovative stirrups showed a significant resistance to shear failure. Good agreement between the experimental and the analytical ultimate load was obtained.

• 한국추진공학회지
• /
• 제17권4호
• /
• pp.63-72
• /
• 2013

탄화수소 스크램제트 엔진 시험을 위하여 한국항공우주연구원 스크램제트 엔진 시험설비의 마하 5 노즐과 디퓨저가 제작되었다. 설비 시동을 개선을 위해 디퓨저 가이드를 장착하였으나 폐색율 60% 엔진 모델을 장착한 상태에서 설비의 과대 팽창으로 인한 엔진 불시동을 확인, 이를 개선하기 위하여 모델 위치를 전방으로 이동하여 설비와 엔진의 시동을 확인하였다. 코어 유동을 측정을 위하여 피토레이크(폐색율 2.3%) 성능시험을 수행하였으며, 설비 노즐의 과소팽창으로 인하여 코어 유동이 디퓨저 쪽으로 갈수록 커지고 있음을 확인하였다. 이는 폐색율이 시험부 유동 양상을 결정짓고 있음을 뜻한다. 폐색율 33% 모델을 장착한 상태에서 설비와 엔진은 원활히 작동하였다. 일련의 시험을 통하여 마하 5 노즐을 장착한 스크램제트 엔진 시험설비는 모델의 폐색율과 관계없이 수직 충격파 효율 약 58%로 시동함을 확인하였다.

• 대한핵의학회지
• /
• 제5권2호
• /
• pp.7-18
• /
• 1971

The liver function test was performed by means of two radioisotope tracer techniques in 20 normal subjects and in 63 patients with hepatobiliary diseases. The blood disappearance rates of $^{131}I$-rose bengal and of $^{198}Au$ colloid were determined by external counting method. The hepatocellular function and the hepatic blood flow were estimated from the observed data and the results were compared with those of the conventional liver function tests. The results obtained were as follows: 1. The mean blood disappearance half time of $^{131}I$-rose bengal was $6.6{\pm}0.63$ minutes in normal control, $17.7{\pm}6.93$ in cirrhosis of the liver, $16.6{\pm}4.80$ in acute hepatitis, and $14.7{\pm}3.46$ in obstructive jaundice. It was markedly prolonged in the hepatobiliary diseases as compared with the normal control, but there was no significant difference among the hepatobiliary diseases. 2. The mean blood disappearance half time of $^{198}Au$ colloid was $4.0{\pm}0.66$ minutes in normal control, $9.8{\pm}3.42$ in cirrhosis of the liver, $4.4{\pm}0.82$ in acute hepatitis, and $5.0{\pm}1.42$ in obstructive jaundice. The difference between cirrhosis of the liver and normal control Was statistically significant. However, there was no definite difference among acute hepatitis, obstructive jaundice, and normal control. The mean blood disappearance rate constant (K value) was $0.177{\pm}0.028/minute$ in normal control. In cirrhosis of the liver, it was markedly decreased which was suggestive of the reduced hepatic blood flow. 3. The ratio of $^{131}I$-rose bengal blood disappearance half time to $^{198}Au$ colloid disappearance half time was $1.68{\pm}0.20$ in normal control, $1.82{\pm}0.31$ in cirrhosis of the liver, $3.80{\pm}0.82$ in acute hepatitis, and $3.01{\pm}0.54$ in obstructive jaundice. The ratios in acute hepatitis and obstructive jaundice were remarkably higher than those in normal control and cirrhosis of the liver. 4. There was a significant correlation between the blood disappearance half time of $^{131}I$-rose bengal and that of $^{198}Au$ colloid in cirrhosis of the liver. 5. In cirrhosis of the liver, the blood disappearance half times of $^{131}I$-rose bengal and of $^{198}Au$ colloid were inversely correlated to the serum albumin level. In acute hepatitis, there was a good positive correlation between the blood disappearance half time of $^{131}I$-rose bengal and the serum transaminase activities. In obstructive jaundice, the blood disappearance half time of $^{131}I$-rose bengal was correlated to the serum bilirubin level.

• 대한소아치과학회지
• /
• 제23권2호
• /
• pp.365-374
• /
• 1996

The prupose of this study was to obtain standard measurements of the tooth size, Bolton ratio, width and length of dental arch and basal arch, overbite and overjet of the children who have normal dentition. The plaster cast of 97 children(47 boys and 50 girls) among the contestants in 1992, 1994, 1995 Healthy Dentition contest in Seoul were measured and following results were obtained. 1. Means and standard deviations of the mesio-distal maximum width of the permanent teeth, Bolton ratio, width and length of the dental arch and basal arch of the upper and lower dentition and overbite and overjet of the children were obtained. 2. Mesio-distal width of the teeth, width and length of the dental arch and basal arch of the upper and lower dentition of the boys were larger than those of the girls. 3. Bolton Overall ratio, Anterior ratio and overjet of the boys were larger than those of the girls and overbite of the boys were smaller than those of the girls, but no significant differences were noted between the boys and the girls(p>0.05). 4. In the comparision of the Healthy Dentition Contestants with Korean adults of Shur, all teeth of the Contestants were larger than those of Korean adults, especially upper and lower bicuspids(p<0.01). In the comparision of the Healthy Dentition Contestants with Caucasians, all teeth except upper and lower central incisor and upper first molar of the contestants were larger than those of Caucasians(p<0.05).

• 재활복지공학회논문지
• /
• 제1권1호
• /
• pp.21-28
• /
• 2007

대부분의 보청기에서는 난청인의 청력 손실을 보상하기 위해 음성 증폭 알고리즘과 잡음 및 피드백을 제거하기 위한 알고리즘 등을 사용하고 있고, 음성의 인지율을 높이기 위해서 음성의 대비를 강조하는 알고리즘을 사용한다. 음성 대비 강조 알고리즘 사용 시 과도한 대비증폭에 의해서 포먼트(formant) 사이에서 마스킹 현상이 발생할 수 있다. 마스킹 현상을 확인하기 위해서 6가지의 주관적인 평가와 1가지의 객관적인 평가를 수행하였다. 주관적인 평가로는 순음 검사, 어음 청취 역치 검사, 낱말 분별력 검사, 순음 마스킹 검사, 포먼트 순음 마스킹 검사, 어음 마스킹 검사로 이루어져있고 객관적인 평가를 위해서 LLR(log likelihood ratio)을 도입하였다. 정상 청각 피험자와 난청 피험자의 결과로 미루어 볼 때, 난청 피험자가 마스킹이 잘 일어난다는 것을 볼 수 있었고, 어음을 이용한 마스킹 검사에서는 마스킹에 의해서 난청 피험자에서 어음에 대한 인지율이 떨어지는 결과를 볼 수 있다. 이러한 현상은 포먼트 향상에 의한 왜곡 때문이 아닌 마스킹 때문이다. 그러므로 마스킹 효과의 특성을 조사하여, 보청기 적합 시, 이러한 마스킹 특성을 고려하는 것이 필요하다.