This study was carried out to analysis the landform characteristics of land creep areas in south Korea. Aspect ratio in 17 areas (approximately 46.0 %) among total land creep areas (37 areas) was ranged from 0.37 to 0.92. Also, aspect ratio in 36 areas (approximately 97.0 %) was less than 2. Longitudinal section form ratio of 15 areas (approximately 41.0 %) was less than 1.0, whereas 22 areas (approximately 59.0 %) were more than 1.0. Horseshoe hoof form in land creep areas were mostly appeared to flat land types, whereas convex terrain ground form was prevailed to micro-topography. Mean contour intervals were higher in micro-topography (mean 29.4 m, range 9.5 m ~ 83.2 m) than in except micro-topography (mean 24.3 m, range: 14.4 m ~ 59.4 m) in land creep areas. The contour intervals were slightly wider in micro-topography (mean 5.1 m, range: 4.9 m ~ 23.8 m) than in except micro-topography in land creep areas. The results indicate that contour intervals were significantly different (P < 0.05) between micro-topography and except micro-topography in land creep areas.
This study was conducted to develop the merchantable stem volume models to predict the volume up to upper diameter or upper height out of the total stem volume, targeting on Pinus densiflora, Pinus koraiensis, and Larix kaempferi in South Korea. The 131 stemmed sample trees for stem analysis were used as the data for developing the models. The six kinds of merchantable volume equations including merchantable volume ratio form, ratio form, and exponential ratio form were examined to develop the best models. The two models were finally selected as the best models to predict the merchantable volume: $V_d=V_t\{{\exp}[{\alpha}_1(d^{{\alpha}_2}/D^{{\alpha}_3})]\}$ for upper diameter and $V_h=V_t\{1+{\beta}_1(P^{{\beta}_2}/H^{{\beta}_3})\}$ for upper height. By rearranging the best model equations, implicit taper functions were derived, and the estimation was performed for the upper height by upper diameter and upper diameter by upper height. Because of not only the high accuracy but also the convenience, the models developed in this study were considered to be easily applicable in the field of forestry.
Journal of the Korean Institute of Telematics and Electronics B
/
제33B권3호
/
pp.120-125
/
1996
A new hit-and-miss ratio transform is introduced as a modified hit-and-miss transform to be robust to noise, which uses a quasi-matching technique based on the fitting ratio functions. And a new gray-level object segmentation algorithm is proposed, which is based on the hit-and-miss ratio transform and threshold decomposition. The proposed segmentation images, and is similarly applicable to segmentation of an object with specific shapes form natural real images.
An, Chi-Hyun;Heo, Soo-Rye;Cho, Ik-Hyun;Kim, Hyung-Seop
Journal of Periodontal and Implant Science
/
제35권2호
/
pp.359-369
/
2005
It has been suggested that morphologic characteristics of the periodontium are partly related to the shape and form of the teeth. Furthermore, the severity of symptoms of periodontal disease have been proposed to differ among these various morphologic entities or "biotypes". The purpose of the present study was to examine the relationship between the form of the crowns in the maxillary anterior tooth segment and (1) a group of morphological characteristics and (2) the thickness of the gingiva. The thickness of gingiva was measured by ultrasonic device(SDM). 100 subjects devoid of symptoms of destructive periodontal disease were examined regarding, e.g., probing depth, gingival recession, width of keratinized gingiva, thickness of the keratinized gingiva. From maxillary study cast, the width(at the apical third-CW) and the length(CL) of the crowns of the 6 anterior teeth were determined. A CW/CL-ratio was calculated for each tooth and averaged for each tooth region. The individual mean CW/CL-ratio values for the central incisors were ranked. The 10 subjects ranked highest and the 10 ranked lowest were selected as having either a long-narrow(group N) or a short-wide(group W) form of the crown of the tooth. The data for each of the examined parameters were averaged for each tooth region in each subject and mean values for subjects in groups W and N were compared using the Student t-test. Stepwise multiple regression analysis, including data from the whole sample, was performed for each tooth region with the thickness of the free gingiva as the dependent variable. The results from the analyses demonstrated that individuals with a long-narrow form of the central incisors displayed, compared to individuals with a short-wide crown, form (l) a narrow zone of keratinized gingiva, (2) a pronounced "scalloped" contour of the gingival margin. There was no significant difference between groups N and W with respect to the thickness of the keratinized gingiva. The CW/CL-ratio data revealed that a certain form of the crowns in the central incisors was accompanied by a similar form in the lateral incisors and canine tooth region. The regression analyses demonstrated that the thickness of the keratinized gingiva in central, lateral incisors and canines was significantly related to the width of the keratinized gingiva.
Han, Hyejin;Park, Bomi;Park, Bohyun;Park, Namsoo;Park, Ju Ok;Ahn, Ki Ok;Tak, Yang Ju;Lee, Hye Ah;Park, Hyesook
Journal of Preventive Medicine and Public Health
/
제51권3호
/
pp.163-168
/
2018
Objectives: Due to their developmental characteristics, adolescents have a higher probability than other age groups of experiencing injuries caused by accidents, violence, and intentional self-harm. The severity and characteristics of injuries vary by the intentionality and mechanism of injury; therefore, there is a need for a national-level estimate of the scale and the severity of injuries in adolescents that takes these factors into account. Methods: By using data from the Emergency Department-based Injury In-depth Surveillance Data, National Emergency Department Information System, the Korean National Hospital Discharge In-depth Injury Survey, and cause of death statistics, we calculated the emergency department (ED) visit rate, hospitalization rate, and death rate of injuries per 100 000 adolescents for each injury mechanism. The calculated rates were used to generate the injury pyramid ratio (ratio of death rate to hospitalization rate to ED visit rate) to visualize the scale and the severity of the injury. Results: The mortality rate in adolescents due to injury was 10/100 000; the corresponding rates for hospitalization and ED visits were 1623 and 4923, respectively, resulting in an injury pyramid ratio with the general pyramid form, with a 1:162:492 ratio of deaths to hospitalizations to ED visits. The mortality rate due to suicide/intentional self-harm was 5/100 000, while 35 were hospitalized for this reason and 74 made ED visits. The pyramid ratio of 1:7:15 for intentional self-harm/suicide showed a steep pyramidal form, indicating considerable lethality. The mortality rate due to motor vehicle collisions (MVCs) was 3/100 000; 586 were hospitalized for this reason, while 1023 made ED visits. The pyramid ratio of 1:195:341 for MVCs showed a gradual pyramid form, indicating that the lethality was low and the scale of injury was high. Conclusions: The main categories of injuries in adolescents were visualized in pyramid form, contributing to an understanding of the scale of each injury by mechanism in terms of levels of death, hospitalization, and ED visits. These findings will be helpful for understanding how to prioritize injuries in adolescents.
Proceedings of the Korean Institute of Building Construction Conference
/
한국건축시공학회 2019년도 추계 학술논문 발표대회
/
pp.4-5
/
2019
With recent advances in computer technology, the ratio of free-form building designs to those of the past is increasing gradually. However, the current technology of free-form structure is very low. The core technology for free-form building implementation is the manufacturing technology of FCP (Free-form Concrete Panel), which indicates an unformed outside, and through the development of FCP manufacturing technology, the construction technology of free-form architecture can be enhanced. The inside and outside of an free-form building should be represented by the designer's intended curvature, and the panel's thickness by segment should be constant. For this reason, the technology that keeps the thickness of panels constant during the FCP production process is a key technology that can improve the quality of FCP. In this study, a basic study on ways to maintain a constant thickness of FCP is conducted.
The Journal of Asian Finance, Economics and Business
/
제7권6호
/
pp.9-18
/
2020
This study seeks to analyze the effect of Non-Performing Loans and Capital Adequacy Ratio on Return on Assets on ten conventional banks listed on the Indonesia Stock Exchange (BEI-IDX). This study uses secondary panel data for 2015-2019 in the form of CAR and NPL values from ten conventional banks listed on the BEI-IDX during the 2020 observation period. The research approach is quantitative descriptive with data analysis methods, namely, linear regression. The testing phase of this study includes: transform value, F-test, T-test and hypothesis test with significancy level sig < 0.05. The results of this study reveal that Non-Performing Loans had a significant negative effect (t = -2,637) (0.011 <0.0) on Return on Assets, while Capital Adequacy Ratio has no significant effect on ROA (0.760 > 0.05). R2 value is 0.128 or 12.8%. It has a significant effect on variables, calling efforts by banks, governments, and authorities monetary of related institutions to maintain the stability of finance. The reduction of Non-Performing Loan impacts on assets and capital adequacy ratio, besides, the normal NPL will control the stability of finance. If a balance is created either in the form of values or amounts of the variables, the reduction in Non-Performing Loans will be controlled.
We present methods for studying the log-density ratio that enables the selection of the predictors and the form to be included in the logistic regression model. Under bivariate normal distributional assumptions, we investigate the form of the log-density ratio as a function of two predictors. If two covariance matrices are equal, then the crossproduct and quadratic terms are not needed. If the variables are uncorrelated, we do not need the crossproduct terms, but we still need the linear and quadratic terms. We also explore other conditions in which the crossproduct and quadratic terms are not needed in the logistic regression model.
In an atempt to elucidate further physicochemical properties of furosemide-PVP coprecipitates, extensive investigations such as TLC, UV,IR, NMR, X-ray diffraction, TGA and DTA studies were carried out for the furosemide test systems. X-ray diffraction studies revealed that the pure furosemide and the furosemide contained within a physical mixture were crystalline in nature. However, there was no crystallinity evident in the 1:5 furosemide-PVP 40,000 coprecipitate system, even after standing for two years. The various ratio furosemide-PVP 40,000 coprecipitate systems revealed that the coprecipitate containing a greater amount of PVP 40,000 than that of furosemide showed a crystalline state of furosemide and that the minimum amounts of PVP to make amorphous form of furosemide was 1:1 ratio of furosemide to PVP. From the furosemide-PVP coprecipitate systems with PVP of different molecular weights of 10,000, 40,000 and 360,000, all the 1:1 ratio coprecipitates did not exhibit any crystallinity of furosemide, whereas all the 2:1 ratio coprecipitates showed a presence of crystalline furosemide. All the coprecipitated preparations with PEG 4,000 and with PEG 6,000 showed the diffraction peaks indicating the presence of crystalline furosemide. The comparison of infrared spectra of the physical mixture and the coprecipitate showed an interaction such as association between the functional groups of furosemide and PVP in the molecular level, whereas the studies by TLC, UV and NMR showed its dissociation in methanol solution. The weight losses in TGA curves showed all the same patterns. However, a little different transition form in DTA thermograms was shown between the physical mixture and the coprecipitate, indicating the different thermal property.
The purpose of this study was to evaluate facial form, arch form and tooth form in young adults to determine if a correlation exists. 115 subjects who had healthy natural maxillary incisors and good occlusion consisted of 71 males and 44 females ranging from 20-30 years of age. Facial photographs and, intraoral photographs of upper anterior teeth and dental casts of upper jaws were taken to demonstrate facial form, dental arch form and tooth form. Form analysis is determined by comparing the ratio of the widths of the faces, dental archs and the teeth. The Chi-square test of independence between facial form, arch form and tooth form, was executed and the significance level determined. The results were as follows : 1. The distribution of facial forms was 66.1% square-tapering, 27.0% square, 5.2% ovoid, 2% tapering-square. 2. The distribution of tooth forms was 65.2% ovoid, 20.0% square-tapering, 11.3 % tapering-square, 3.5 % square. 3. The distribution of arch forms was 50.4 % square-tapering, 48.7 % tapering, 0.9 % reverse tapering-square. 4. There was no large differences in the distribution of facial forms, dental arch forms and tooth-forms between male and female. 5. No relationship existed between the tooth form and the facial form. 6. No relationship existed between the facial form and the dental arch form. 7. No relationship existed between the tooth form and the dental arch form. 8. This gave the impression that dental arch form and facial form could not be used as a true index in tooth selection.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.