• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.203-211
• /
• 2014

Tunnel reduces travel time as and it is essential facilities for the eco-friendly road construction. In recent years, It has been accelerating the tunnel construction to provide a higher level of traffic service but a driver driving in the narrow and dark tunnel takes characteristically psychological anxiety and the restriction of the sight. Moreover, A driver passing through more than 1,000m long tunnel, as to pass inside the monotonous form of the tunnel for a long time can cause drowsiness and increase the driver load. This driver load can degrade road-holding of the inside of the long tunnel highly and pose a high risk of accidents. Accordingly, In this study is to present the proper length of the Tunnel, considering the characteristics of traffic accident. For this, this study is that the long tunnel that affects traffic safety traffic safety variables are selected and classified. Traffic safety variables are classified in detail as a variable of the traffic accident and velocity one, the applicable variables the number of the traffic accident, the ratio of the traffic accident, driving velocity, the individual vehicle velocity etc. Traffic safety variables are categorized as more than a pole length of the tunnel in order to examine its impact on correlation analysis. The results indicate significant results in traffic accidents in accordance with traffic accidents, traffic safety, selects the variable was Variable depending on the length of the tunnel traffic safety point of significantly increasing the possibility of an accident can be seen as a high point. And the point of the Distribution of selected variables in order to create a traffic safety was a significant increase in traffic safety variables was set at critical intervals. Before reaching the critical point and the corresponding length of the long tunnel was set at the proper length. In this study, the optimum length of the proposed long tunnel through the long tunnel that occur in the future to contribute to reducing traffic accidents would be able to be determined.

• Korean Journal of Poultry Science
• /
• v.12 no.1
• /
• pp.31-38
• /
• 1985

To learn more about the productivity of edible meat and its functional properties of spent hen, 60 White Leghorn fowls at 20 month of age were randomly divided into 6 groups, 10 hen for each group, and processed. As the productivity of edible meat, the yield of dressed carcass, giblets, cut-up meat, and breast and leg (thigh and drustick) muscles were determined. The approximate chemical composition, the content of salt-soluble protein, the emulsifying capacity and W.H.C. of breast and leg muscle were measured as the functional properties. The results were summarized as follows. 1. The average live weight of spent hen was 1,576.7g from which the yield of dressed carcass and giblets were 998.9g(63.4%) and 75.3g(4.8%) respectively. It means the yield of ready-to-cook form was 1,074.2g(68.2%) and the inedible byproducts was 502.5g (31.8%). 2. The average, weight of each part of cut-up chicken were: neck 41.0g(4.1%), wings 135.9g (13.6%), breast 276.7g (27.7%), legs 323.6g (42.4%). back 176.1g(17.6%) and the cutting-loss was 45.6g(4.6%). 3. The average weight of total edible muscle from breast and leg was 51.5g(85.86% of breast and leg cut weight) and the percentages based on the carcass and live weights were 51.6% and 32.7%, respectively. 4. The contents of H$_2$O, protein, fat and water-protein ratio of breast muscle were 72.95%, 20.54%, 1.59% and 3.55, respectively and those of leg muscle were 71.9%, 19.12%, 3.96% and 3.76%, respectively. 5. The salt-soluble protein contents of breast and leg muscle were 7.97% and 6.26% and their concentrations based on the total protein content were 38.8% and 32.74%, respectively. 6. The emulsifying capacity of breast and leg muscle was 43.23$m\ell$and 43.23$m\ell$, respectively. 7. The W. H. C- of breast and leg muscle was 54.23% and 52.61%, respectively.

• Radiation Oncology Journal
• /
• v.24 no.4
• /
• pp.280-284
• /
• 2006

$\underline{Purpose}$: To evaluate biological characteristics of neutron beam generated by MC50 cyclotron located in the Korea Institute of Radiological and Medical Sciences (KIRAMS). $\underline{Materials\;and\;Methods}$: The neutron beams generated with 15 mm Beryllium target hit by 35 MeV proton beam was used and dosimetry data was measured before in-vitro study. We irradiated 0, 1, 2, 3, 4 and 5 Gy of neutron beam to EMT-6 cell line and surviving fraction (SF) was measured. The SF curve was also examined at the same dose when applying lead shielding to avoid gamma ray component. In the X-ray experiment, SF curve was obtained after irradiation of 0, 2, 5, 10, and 15 Gy. $\underline{Results}$: The neutron beams have 84% of neutron and 16% of gamma component at the depth of 2 cm with the field size of $26{\times}26\;cm^2$, beam current $20\;{\mu}A$, and dose rate of 9.25 cGy/min. The SF curve from X-ray, when fitted to linear-quadratic (LQ) model, had 0.611 as ${\alpha}/{\beta}$ ratio (${\alpha}=0.0204,\;{\beta}=0.0334,\;R^2=0.999$, respectively). The SF curve from neutron beam had shoulders at low dose area and fitted well to LQ model with the value of $R^2$ exceeding 0.99 in all experiments. The mean value of alpha and beta were -0.315 (range, $-0.254{\sim}-0.360$) and 0.247 ($0.220{\sim}0.262$), respectively. The addition of lead shielding resulted in no straightening of SF curve and shoulders in low dose area still existed. The RBE of neutron beam was in range of $2.07{\sim}2.19$ with SF=0.1 and $2.21{\sim}2.35$ with SF=0.01, respectively. $\underline{Conclusion}$: The neutron beam from MC50 cyclotron has significant amount of gamma component and this may have contributed to form the shoulder of survival curve. The RBE of neutron beam generated by MC50 was about 2.2.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.333-343
• /
• 2004

Impression cytology refers to application of cellulose acetate filter material to the ocular surface to remove the superficial layers of the conjunctival epithelium. The technique is non-invasive, is easy to perform, causes minimal discomfort to the patient, and can be used to follow changes in the conjunctival ocular surface over time. With this method, the morphology of the conjunctival ocular surface can be studied and the degree of squmaous metaplasia assessed. This study was performed to evaluate the conjunctival surface by impression cytology in dry eye patients. A total of 70 students with no contact lens wearing history were recruited. Subjects were required to fill in a McMonnies dry eye symptom questionnaire. The non-invasive tear thinning time(TIT) test of each subject was measured, followed by Schirmer tear test(STI), tear film break-up time(TBUT) tests and Rose-bengal staining were performed as a baseline. Conjunctival epithelial cells from the inferior bulbar conjunctiva were harvested by the impression cytology technique. The specimens collected were labelled and stained with PAS(Periodic Acid Schift)-haematoxylin. The goblet cells and conjunctival epithelial cells were observed under a light microscope of 400x magnification. The specimens were classified according to the Nelson Grading scale which was based on the degree of squamous metaplasia such as changes of goblet cells density, size/form, N:C(nucleus : cytoplasm) ratio. Dry eye patients were observed morphological changes of the epithelial cells, different nuclear alterations, decrease of the goblet cells density. The degree of cytological changes was related to severity of dry eye conditions. When the epithelial cell morphology was graded according to the system described by Nelson, specimens from the control group revealed 91.43% of the eyes to be grade 0 and 8.57% to be grade 1, whereas of the dry eye patients, 20% were grade 0, 42.86% grade 1, 34.29% grade 2 and 2,86% grade 3. Impression cytology represents a non- or minimally invasive biopsy of the ocular surface epithelium with no side effects or contraindications. It has demonstrated to be a useful diagnostic aid for a wide variety of processes involving the ocular surface. This technique is a safe, simple method and may help increase understanding of various ocular surface alterations in dry eye patients.

• Journal of Preventive Medicine and Public Health
• /
• v.23 no.1 s.29
• /
• pp.22-32
• /
• 1990

Associations between type A behavior Pattern (TABP) and parental social control were examined by a questionnaire survey in a sample of 803 undergraduates of the three universities in Daegu city in 1988. TABP was assessed by the Student Jenkins Activity Survey (SJAS, short form) and social control of parents by Bernstein and Brandis' Index of control and communication which were both dichotomized by median. The mean age of the sample was 20.7 (standard deviation, 2.2) and mean of total score of SJAS was 5.6 with its standard deviation and median, 2.7 and 5, respectively. In stratified analysis for TABP-social control association by the native place, sex and socioeconomic status (SES), males of rural origin with low SES showed odds ratio (OR), 2.49 but those with high SES 0.40. For females of rural origin, those with low SES showed OR, 1.02, whereas those with high SES did 0.35. For those who was of urban origin, males with low SES had OR 1.27, and those with high SES did 1.29. Females with high SES showed 0.85 and those with low SES 0.67. None of the TABP-social control associations among the strata showed confidence intervals not including unity. In multiple logistic regression by native place, for those with rural origin the only term showed a statistically significance was the social control-SES of parents interaction, OR 3.99 (95% confidence interval, $1.03{\sim}15.46$). For those of urban origin, none of the terms are statistically significant. These results suggest a social upward mobility by education of the rural disadvantaged group and a Confucian idea that regards academic achievement as one of social virtues, both of which may reflect the different sociocultural structures from the West.

• Childhood Kidney Diseases
• /
• v.13 no.2
• /
• pp.176-188
• /
• 2009

Purpose : Peritoneal dialysis (PD) is the major form of dialysis in use for infants and children with end-stage renal disease (ESRD). The aim of this study was to gain insight into the current status of children on PD in Korea. Methods : In May 2008, questionnaires were sent to the pediatric nephrologists via e-mail. Four centers replied and those data were reviewed. Results : A total of 103 patients were included in this study. Male to female ratio was 1.6:1. Mean age was $11.5{\pm}4.9$ years (0-19 years). Primary renal diseases diagnosed were as follows: primary glomerular disease (34%), chronic pyelonephritis-reflux nephropathy (14.6%), systemic disease (9.7%), renal hypoplasia/dysplasia (8.7%), heredofamilial disease (6.8%), vascular disease (3.9%), drug-induced nephropathy (1.0%), and unknown (12.6%). PD modalities were as follows: CAPD (42.7%), CCPD (27.2%), NIPD (11.7%), and Hybrid (18.4%). Weekly total Kt/V was $2.1{\pm}0.7$ (0.3-4.1). Results of peritoneal equilibrium test were as follows: low 36.8%, low average 31.6%, high average 19.7%, and high 11.8%. Z-score for weight was $-1.00{\pm}1.20$ (-4.54~+2.50). Z-score for height was $-1.55{\pm}1.65$ (-9.42~+1.87). Growth hormone was administered in 24.3% of patients. Anti-hypertensive drugs were administered in 64.0% of patients. Laboratory findings were as follows: hemoglobin $10.5{\pm}1.4$ g/dL, calcium $9.7{\pm}0.7$ mg/dL, phosphorus $5.4{\pm}1.4$ mg/dL, and parathyroid hormone $324.2{\pm}342.8$ pg/mL. Conclusion : Primary glomerular disease was the most common cause of ESRD. CAPD was the most prevalent PD modality. Low and low average peritoneal transport type were common. Growth disturbance were noted in many patients. Some patients had hypertension even with anti- hypertensive drugs. Calcium-phosphorus levels were maintained adequately, but many patients had secondary hyperparathyroidism.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.33-40
• /
• 2006

The characteristics of the aluminum waste melting and the distribution of the radioactive nuclides have been investigated for the estimation on the volume reduction and the decontamination of the aluminum wastes from the decommissioning of the TRIGA MARK it and III research reactors at the Korea Atomic Energy Research Institute(KAERI). The aluminum wastes were melted with the use of the fluxes such as flux $A:NaCl-KCl-Na_3AlF_6$, flux B:NaCl-NaF-KF, flux $C:CaF_2$, and flux $D:LiF-KCl-BaCl_2$ in the DC graphite arc furnace. For the assessment of the distribution of the radioactive nuclides during the melting of the aluminum, the aluminum materials were contaminated by the surrogate nuclides such as cobalt(Co), cesium(Cs) and strontium(Sr). The fluidity of aluminum melt was increased with the addition of the fluxes, which has slight difference according to the type of fluxes. The formation of the slag during the aluminum melting added the flux type C and D was larger than that with the flux A and B. The rate of the slag formation linearly increased with increasing the flux concentration. The results of the XRD analysis showed that the surrogate nuclide was transferred to the slag, which can be easily separated from the melt and then they combined with aluminum oxide to form a more stable compound. The distribution ratio of cobalt in ingot to that in slag was more than 40% at all types of fluxes. Since vapor pressures of cesium and strontium were higher than those that of the host metals at the melting temperature, their removal efficiency from the ingot phase to the slag and the dust phase was by up to 98%.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.179-188
• /
• 2007

In this work $^{14}C\;and\;^3H$ distribution characteristics of spent resins from nuclear power plants(NPPs), pressurized water reactors(PWRs), was investigated. It was found that the recovery percent of $^{14}C$ by the wet oxidation-acid stripping was $81%{\sim}100%$ for the added activity range of $^{14}C,\;0.72\;Bq{\sim}460\;Bq$, and it was not affected by the kinds of stripping acids, 3N-HCl, $3\;N-HNO_3\;and\;3\;N-H_2SO_4$. And the recovery percent of $^3H$ by distillation using the same apparatus was $81%{\sim}101%$ for the added activity range of $^3H,\;0.60\;Bq{\sim}435\;Bq$. Among the tested stripping acids, 3\;N-HCl, $3\;N-HNO_3\;and\;3\;N-H_2SO_4$, only the trapped $^3H$ solution by distillation in $3\;N-H_2SO_4$ was compatible with the 3H scintillator, Ultimagold XR. Neither of the $^{14}C\;and\;^3H$ trapping solutions from the spent ion exchange resin samples by the wet oxidation-3 $N-H_2SO_4$ stripping contained gamma nuclides. However, some gamma nuclides, $^{60}Co,\;^{134}Cs,\;^{137}Cs\;and\;^{54}Mn$, were found in the trapped $^3H$ solutions of the spent resins by the wet oxidation-3 N-HCl stripping. It was the same for the $^3H$ trapping solutions of the spent resins by Sample Oxidizer(PACKARD MODEL 307). Meanwhile only two nuclides, $^{134}Cs,\;and\;^{134}Cs$, were found in the $^{14}C$ trapping solutions of the spent resins by Sample Oxidizer(PACKARD MODEL 307). It was found that most of the $^{14}C$ in the spent resins existed as inorganic carbon form, more than about 70% of the total $^{14}C$ content. Among the analyzed 30 spent ion exchange resin samples, the average concentration of $^{14}C$ and $^3C$ for the high radioactive samples, 8 samples, was $19000\;Bq/g{\pm}41000\;Bq/g,\;670\;Bq/g{\pm}460\;Bq/g$ and that for the low radioactive samples, 22 samples, was $4.2\;Bq/g{\pm}4.3\;Bq/g,\;6.0\;Bq/g{\pm}5.3\;Bq/g$, respectively. And the average $^{14}C/^3H$ ratio for the high radioactive samples, was higher, 28, than that of low radioactive samples, 0.70. Some linear relationship trend was found between the activity concentrations of $^{14}C\;and\;^3H$.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.1
• /
• pp.51-57
• /
• 1993

Objective of this research was to assess the influence of reaction time on the heavy metal-organic ligand complexation by employing kinetic models. Aqueous solutions of humic (HA) or fulvic acid (FA) were reacted with metal solutions with 1:1 ratio to form complexes. Efficiency of organic ligand on metal removal was determined by separating the precipitates from solution using $0.45\;{\mu}m$ filter paper. Complexation between Cu or Pb and HA or FA followed the first- or multiple first order kinetics, largely depending on metal concentration and kind of organic ligand. Amounts of precipitates were increased proportionally with reaction time but reached to quasiequilibrium where rate of precipitate formation was not varied with time. Copper-ligand complexation was, irrespective of ligand, fitted to the single first order kinetics at Cu concentrations lower than $300{\mu}M$, but this was fitted to the multiple first order kinetics at Cu concentrations higher than $300{\mu}M$. As increasing Cu concentrations, the precipitates formed more readily, judging from the increased rate constants (${\kappa}$). In the multiple first order kinetics, ${\kappa}$ was decreased as reaction steps proceeded. Most of Cu-ligand precipitates were formed within 15 min. FA precipitated Cu more rapidly than HA did. ${\kappa}$ for Pb-HA complexation was decreased but that for Pb-FA reaction was increased, as increasing Pb concentration. Most of Pb-organic ligand complexation occurred within 30 min. Afterwards, ${\kappa}$ values were relatively small and not affected much by time. Pb was precipitated by humic acid more readily than Cu when metal concnetrations were $200{\sim}300{\mu}M$. However, when metal concentrations were in the ranges of $400{\sim}500{\mu}M$, a reversed tendency was observed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.202-210
• /
• 2013

As incomes increase, interest in ocean leisure picks up. As a result, a lot of research and developments on hull form design and production of planing boats, mostly used for ocean leisure, are needed. Analysis in researches on resistance of planing boats shows that resistance characteristic of planing boats is different from resistance characteristic of general boats because the former is fast, and its wetted surface is very small. Using Savitsky formula widely used in the calculation of effective horse power in shipbuildingyards, and propulsion system and engine manufacturers, this study calculated total resistance of a research planing boat. Then it analyzed the flow characteristics of the planing boat through theoretical analysis and wind tunnel experiment, and computed air resistance and lift force by changes of speed and trim angle. It also compared and analyzed result of theoretical analysis and experiment of the ratio of air resistance to total resistance under variations of velocity and trim angle. When the study is used to estimate more accurate effective horse power, it is expected to remedy abuses of unnecessarily installing high-powered engine. As nature disasters due to abnormal changes of weather increase, interest in greenhouse gas grows. International Maritime Organization (IMO) legislated Energy Efficiency Design Index (EEDI) and Energy Efficiency Operational Indicator (EEOI) to reduce ship greenhouse gas emissions. But this index will be applied to over 400 tons ships, small ships, emitting more greenhouse gases than larege ships per unit power, will dodge the regulations. Thus, this study indicated a problem by calculating greenhouse gas emissions of an ocean leisure planning boat (a small ship), and suggested the need for EEDI of small ships.