• Wind and Structures
• /
• v.22 no.2
• /
• pp.185-209
• /
• 2016

Across-wind aerodynamic damping ratios are identified from the wind-induced acceleration responses of 15 aeroelastic models of rectangular super-high-rise buildings in various simulated wind conditions by using the random decrement technique. The influences of amplitude-dependent structural damping ratio and natural frequency on the estimation of the aerodynamic damping ratio are discussed and the identifying method for aerodynamic damping is improved at first. Based on these works, effects of turbulence intensity $I_u$, aspect ratio H/B, and side ratio B/D on the across-wind aerodynamic damping ratio are investigated. The results indicate that turbulence intensity and side ratio are the most important factors that affect across-wind aerodynamic damping ratio, whereas aspect ratio indirectly affects the aerodynamic damping ratio by changing the response amplitude. Furthermore, empirical aerodynamic damping functions are proposed to estimate aerodynamic damping ratios at low and high reduced speeds for rectangular super-high-rise buildings with an aspect ratio in the range of 5 to 10, a side ratio of 1/3 to 3, and turbulence intensity varying from 1.7% to 25%.

• Geomechanics and Engineering
• /
• v.2 no.1
• /
• pp.29-44
• /
• 2010

Vertical vibration tests were conducted using model footings of different size and mass resting on the surface of finite sand layer with different height to width ratios which was underlain by either rigid concrete base, under both dry and saturated condition. The effect of saturation on the damping ratio of finite sand stratum underlain by a rigid base has been verified and compared with the results obtained for the case of finite dry sand stratum underlain by the rigid base. Comparison of results of the experimental study showed that the damping in both the cases is less than 10%. The damping ratio obtained for finite saturated sand stratum is marginally lower than that obtained on finite dry sand stratum at H/B ratio of 0.5. The difference between the two cases becomes significant when the H/B ratio increases to 3.0, indicating the significant influence of soil moisture on damping ratio of foundation- soil system with increase in the thickness of the finite sand stratum. Comparison of the predicted damping ratio for a homogeneous sand stratum with the experimental damping ratio obtained corresponding to the height to width ratio of 3.0 of the finite sand stratum underlain by the rigid concrete base indicates a significant reduction in damping ratio of the foundation-soil system for both the cases.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.3
• /
• pp.98-106
• /
• 2014

The effect of blockage ratio on wind tunnel testing of small vertical-axis wind turbine has been investigated in this study. Height and rotor diameter of the three blades Darrieus vertical axis wind turbine used in present test were 0.4m and 0.35m respectively. We measured the wind speeds and power coefficient at three different wind tunnels where blockage ratio were 3.5%, 13.4% and 24.7% respectively. The test results show that the measured powers have been strongly influenced by blockage ratio, generally increased as the blockage ratio increases. The maximum power at higher blockage ratio has been obtained at relatively high tip speed ratio compared with that at low blockage ratio. The measured power coefficients under high blockage ratio can be improved from proper correction using the simple correction equation based on blockage factor. In present study, the correction error for power coefficient can be less than 5%, however correction effectiveness reveals relatively poor at high blockage ratio and low wind speed.

• The Journal of the Korea Contents Association
• /
• v.8 no.7
• /
• pp.224-232
• /
• 2008

Sport industry creates value-added by production and distribution of product or service related with sports or sports. Professional sports will lead to major area of sport service industry in the future. The purpose of study is to analyze financial condition and management performance by using financial statement(2005-2007) of korean professional soccer citizen teams. The analysis of financial condition and management performance is executed by financial ratio analysis method. The content of this study involve comparison with standardization ratio and financial ratios among professional soccer citizen teams. The results of this study are as follows. First, liquidity ratio measured by current ratio and quick ratio was high with compared to standardization ratio. Second, leverage ratio measured by debt ratio was very high. Third, activity ratio was good condition. Finally, profitability ratio was very low having minus ratio generally.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.217-220
• /
• 2006

The lift and drag forces produced by a wing of a given cross-sectional profile are dependent on the wing planform and the angle of attack. Aspect ratio is the ratio of the wing span to the average chord. For conventional fixed wing aircrafts, high aspect ratio wings produce a higher lift to drag ratio than low ones for flight at subsonic speeds. Therefore, high aspect ratio wings are used on aircraft intended for long endurance. However, birds and insects flap their wings to fly in the air and they can change their wing motions. Their wing motions are made up of translation and rotation. Therefore, we tested flapping motions with parameters which affect rotational motion such as the angle of attack and the wing beat frequency. The half elliptic shaped wings were designed with the variation of aspect ratio from 4 to 11. The flapping device was operated in the water to reduce the wing beat frequency according to Reynolds similarity. In this study, the aerodynamic forces, the time-averaged force coefficients and the lift to drag ratio were measured at Reynolds number 15,000 to explore the aerodynamic characteristics with the variation of aspect ratio. The maximum lift coefficient was turned up at AR=8. The mean drag coefficients were almost same values at angle of attack from $10^{\circ}$ to $40^{\circ}$ regardless of aspect ratio, and the mean drag coefficients above angle of attack $50^{\circ}$ were decreased according to the increase of aspect ratio. For flapping motion the maximum mean lift to drag ratio appeared at AR=8.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.645-651
• /
• 2015

The objective of this study is to experimentally investigate the effect of design parameter on the mass ratio of a central-driven ejector. The design parameters are the primary nozzle area and distance ratios, diffuser exit-area ratio and mixing-tube length ratio. The experimental setup was an open-loop continuous circulation system which has a movable nozzle ejector, an electric motor-pump, a water tank, a control panel and high-speed camera unit. We calculated the mass ratio using the measured primary and suction-flow rates with the experimental parameter of primary water-flow rate or pressure. The results showed that the mass ratio increased with the primary nozzle distance ratio and mixing tube length ratio, while the mass ratio decreased with the primary nozzle-area ratio and diffuser exit-area ratio.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.2123-2130
• /
• 2000

Radial immersion ratio is an important factor to determine the threshold in face milling and should be estimated in process for automatic force regulation. In this paper, presented is a method of on-line estimation of the radial immersion ratio using cutting force. When a tooth finishes sweeping, sudden drop of cutting forces occurs. This force drop is equal to the cutting force that acts on a single tooth at the swept angle of cut and can be obtained from cutting force signal in feed and cross-feed direction. The ratio of cutting forces in feed and cross-feed directions acting on the single tooth at the swept angle of cut is a function of the swept angle of cut and the ratio of radial to tangential cutting force. In the research, it is found that the ratio of radial to tangential cutting force is not affected by cutting conditions and axial rake angle. Therefore, the ratio of radial to tangential cutting force determined by just one preliminary experiment can be used regardless of the cutting conditions. Using the measured cutting force and predetermined ratio, the radial immersion ratio is estimated. Various experiments show that the radial immersion ratio and instantaneous ratio of the radial to tangential direction cutting force can be estimated very well by the proposed method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.167-178
• /
• 2008

Despite the fact that chogakpos are part of our wonderful Kyubang(the women's quarters in the Chosun Dynasty) culture with their own unique beauty and artistic values, there has been no scientific and objective proof of their aesthetic values. Once they are proved for their beauty through scientific analysis, they will be recognized worldwide along with our unique culture. The methodology included a review of related literature and theses along with magazines, periodicals, and Internet books. The analysis of lines parting, the dimensions of chogakpos were carried out over 108 pieces introduced in Old Pojagis by Heo Dong-hwa. As for line parting, the dimensions of chogakpos were measured to see if the golden and Geumgang ratio could be applied and to discover their unique partition ratio. As a result, there was the presence of the golden ratio applied to them with the golden curves from golden triangles and rectangles also found therein. The Yeoijumunbo confirmed that there was the golden ratio between the radius of a circle and a side of a regular decagon inscribed in the circle. The common line ratio among the squares, isosceles triangles, wanes, and overlapping rectangles was around 1:1.31, which means that there was a unique line ratio in the traditional chogakpos. Furthermore, the ratio of 1:1.31 was close to the Geumgang ratio commonly used in the traditional buildings of Korea.

• Childhood Kidney Diseases
• /
• v.12 no.2
• /
• pp.150-156
• /
• 2008

Purpose : Many results have reported a correlation between the spot urine protein/creatinine ratio(P/C ratio) and 24-hour urinary protein(24UP) amount. This study was designed to evaluated correlation between 24UP amounts and P/C ratio in children and to find the factors that affect this correlation. Methods : 210 patients who visited the Department of Pediatrics in Busan Paik Hospital from september 2003 to december 2007 were included in this study. All the patients were divided into I, II, III/A, B, C group[I:24UP(mg/$m^2$/day)]<100, II: 100$\leq$24UP<1,000, III: 24UP$\geq$1,000, A: Cr excretion(mg/kg)<15, B: 15$\leq$Cr excretion<25, C: Cr excretion$\geq$25)]. Pearson correlation analysis was performed between 24UP and P/C ratio to evaluate the relationship. We defined fractional difference between 24UP and P/C ratio, and then performed multiple regression analysis. Results : There was a strong positive linear correlation between 24UP and P/C ratio in all patients, and the correlation was also good in each group. The factors affecting accurate quantitation of proteinuria using spot urine P/C ratio was creatinine excretion. Conclusion : Spot urine P/C ratio is a useful test to predict proteinuria roughly. Therefore, we expect that urine P/C ratio can be used as parameter instead of 24UP, if we set cutoff value of P/C ratio considered to creatinine excretion according to age and sex in large pediatric population.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.2 s.34
• /
• pp.221-231
• /
• 1991

A case-control study was conducted to investigate the risk factors (Part of job, Obesity, Alcohol, Smoking, Milk, Salt. and Family history) for hypertension. We selected 330 hypertension cases (male;247, female;83) and 1,336 controls (male;887, female;449) from employees in Taegu city from 1 May to 30 November, 1908. Data was analysed using a logistic regression model. Statistically significant elevated odds ratio were noted for alcohol (odds ratio=3.23), obesity (odds ratio=2.31), salt(odds ratio=1.75) in male (p<0.05) and those in female were noted for alcohol (odds ratio=16.49), family history(odds ratio=3.70), obesity (odds ratio=1.74) and salt (odds ratio=1.73) (p<0.05). Statistically significant reduced odds ratio was noted for milk in both sexes (odds ratio=0.69 for male and 0.65 for female)(p<0.05) and the dose-response relationship between milk intake and hypertension was confirmed (p<0.05). Therefore, milk seems to be preventive factor for hypertension. Smoking was not significantly associated with hypertension in both sexes. The part of job was significantly associated with hypertension in female by simple analysis (P<0.05) but the relationship was disappeared when multivariate analysis (logistic regression analysis) was done.