• Journal of Life Science
• /
• v.6 no.2
• /
• pp.104-110
• /
• 1996

The present study was conducted to elucidate the functional property of tea extract obtained from tea extracts, semi-fermented tea(oolong tea) and fermented tea(black tea). Tea extracts exhibited remarkable nitrite-scavenging actions, and the action increased with the increased of the amount of tea extracts. The nitrite-scavenging actionof tea extracts showed pH dependent, highest at pH 1.2 and lowest at pH6.0. The nitrite-scavenging rate in tea extracts/amine/nitrite systems proved to be faster than that in amine/nitrite systems. To screen the nitrite-scavenging factors, tea extracts were fractionated into water-soluble, methanol-soluble, methanol-precipitate and crude catechin fraction. Among these fractions of tea extracts, the crude catechin fraction possessed greater nitrite-scavenging action than the other fractions. The nitrite-scavenging action of tea extracts increased with the contents of total phenols and an absorbance at 280nm, nitrite-scavenging factors were supposed to be and catechins in tea polyphenol compounds.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.905-913
• /
• 1987

This paper presents a speaker dependent isolated digit recognition algorithm using the Mellin transform. Since the Mellin transform converts a scale information into a phase information, attempts have been made to utilize this scale invariance property of the Mellin transform in order to alleviate a time-normalization procedure required for a speech recognition. It has been found that good results can be obtained by taking the Mellin transform to the features such as a ZCR, log energy, normalized autocorrelation coefficients, first predictor coefficient and normalized prediction error. We employed a difference function for evaluating a similarity between two patterns. When the proposed algorithm was tested on Korean digit words, a recognition rate of 83.3% was obtained. The recognition accuracy is not compatible with the other technique such as LPC distance however, it is believed that the Mellin transform can effectively perform the time-normalization processing for the speech recognition.

• KSBB Journal
• /
• v.10 no.5
• /
• pp.547-552
• /
• 1995

Some functional and rheological properties of the ${\gamma}$-polyglutamic acid(${\gamma}$-PGA) produced from alkalophilic Alcaligenes sp. were investigated. Viscosity synergism with thickening agents, capacities for gelling, entrapig of heavy metals, and flocculability of ${\gamma}$-PGA were not observed, but the relatively good compatability with various polyvalent metallic ins, excellent absorption ability and spinability were observed. The ${\gamma}$-PGA solution showed non-Newtonian flow behavior and exhibited pseudoplastic property with a yield stress at above 1% concentration. The values of flow index for 1% solution were in the range of 0.41∼0.75 showing shear rate dependency and the value of yield stress was 2.28 Pa. The value of consistency index was 0.868 Pa$.$Sn and was exponentially dependent on concentration.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.4
• /
• pp.231-236
• /
• 2004

A normally open thermopneumaticc-actuated microvalve has been fabricated and their properties are investigated. The advantages of the proposed microvalve are of the low cost fabrication process and the transparent optical property using polydimethylsiloxane (PDMS) and indium tin oxide (ITO) glass. The fabricated microvalves with in-channel configuration are easily integrated with other microfluidic devices on the same substrate. The fabrication process of thermopneumatic-actuated microvalvesusing PDMS is very simple and its performance is very suitable for a disposable lab-on-a-chip. The PDMS membrane deflection increases and the flow rates of the microchannel with microvalvels decrease as the applied power to the ITO heater increases. The powers at flow-off are dependent on the membrane thickness and the applied inlet pressure but are independent of the channel width of microvalves. The flow rate is well controlled by the switching function of ITO heater and the closing/opening times are around 20 sec and 25 sec, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1447-1450
• /
• 1999

Countercurrent oxygen reaction (COR) was developed and evaluated for regeneration of exhausted activated carbon. Whether the regeneration technique is feasible or not is affected strongly by gradual loss and physical changes of activated carbon, energy consumption, and effective removal of adsorbed materials during the process. Various parameters such as reaction temperature, the loss of activated carbon, surface area, pore volume, surface structure, adsorptive property, etc. were examined to determine the effectiveness of COR. The results of these tests showed that the parameters were strongly dependent on oxidant flow rate, and suggest that the newly developed COR is comparable and, in some ways, possibly superior to conventional regeneration techniques because the overall process runs in a single step and is less energy intensive, and also because the adsorptive capacity of exhausted activated carbon was completely recovered.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.196-196
• /
• 2016

Landslide dam failure presents as a severe natural disaster due to its adverse impact to people and property. If the landslide dams failed, the discharge of a huge volume of both water and sediment could result in a catastrophic flood in the downstream area. In most of previous studies, breaching process used to be considered as a constructed dam, rather than as a landslide dam. Their erosion rate was assumed to relate to discharge by a sediment transport equation. However, during surface erosion of landslide dam, the sediment transportation regime is greatly dependent on the slope surface and the sediment concentration in the flow. This study aims to accurately simulate the outflow hydrograph caused by landslide dam by overtopping through a 2D surface flow erosion/deposition model. The lateral erosion velocity in this model was presented as a function of the shear stress on the side wall. The simulated results were then compared and it was coherent with the results obtained from the experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.65-65
• /
• 2007

Microstructure and surface roughness of the sensing materials should be improved to use them in advanced sensor applications because the uneven surface roughness degrades the light reflection, pattern resolution, and devices performance. Chemical mechanical polishing (CMP) processing was selected for improving the surface roughness of $CeO_2$ which is one of the well known materials for the oxygen gas sensors. Surface roughness and removal rate of spin coated $CeO_2$ thin films were examined with a change of CMP process parameters such as down force and table speed. The optimized process condition, reflected by the surface roughness with the hillock-free surface as well as the excellent removal rate with the good uniformity, was obtained. The effects of the improved surface roughness on the sensing property of $CeO_2$ thin films were also confirmed. The improved sensitivity of $CeO_2$ thin films for oxygen sensors were obtained after CMP process by the improved surface characteristics. Therefore, we conclude that sensing property of $CeO_2$ thin film is strongly dependent on the surface roughness of $CeO_2$ thin films by using CMP process.

• Computers and Concrete
• /
• v.21 no.3
• /
• pp.279-289
• /
• 2018

Hydration heat and thermal induced cracking have always been a fatal problem for massive concrete structures. In order to study a massive reinforced concrete wall of a storage tank for liquefied natural gas (LNG) during its construction, two mock-ups of $0.8m{\times}0.8m{\times}0.8m$ without and with metal corrugated pipes were designed based on the actual wall construction plan. Temperature distribution and strain development of both mock-ups were measured and compared inside and on the surface of them. Meanwhile, time-dependent thermal and mechanical properties of the concrete were tested standardly and introduced into the finite-element (FE) software with a proposed hydration degree model. According to the comparison results, the FE simulation of temperature field agreed well with the measured data. Besides, the maximum temperature rise was slightly higher and the shrinkage was generally larger in the mock-up without pipes, indicating that corrugated pipes could reduce concrete temperature and decrease shrinkage of surrounding concrete. In addition, the cooling rate decreased approximately linearly with the reduction of heat transfer coefficient h, implying that a target cooling curve can be achieved by calculating a desired coefficient h. Moreover, the maximum cooling rate did not necessarily decrease with the extension of demoulding time. It is better to remove the formwork at least after 116 hours after concrete casting, which promises lower risk of thermal cracking of early-age concrete.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.10 no.1
• /
• pp.113-121
• /
• 2014

In this work, an integrated model including molecular dynamics and chemical rate theory was implemented to calculate the growth of point defect clusters(PDC) and copper-rich precipitates(CRP) which could change the mechanical properties of reactor pressure vessel(RPV) steels in a nuclear power plant. A number of time-dependent differential equations were established and numerically integrated to estimate the evolution of irradiation defects. The calculation showed that the concentration of the vacancies was higher than that of the self-interstitial atoms. The higher concentration of vacancies induced a formation of the CRPs in the later stage. The size of the CRPs was used to estimate the mechanical property changes in RPV steels, as is the same case with the PDCs. The calculation results were compared with the measured values of yield strength change and Charpy V-notch transition temperature shift, which were obtained from the surveillance test data of Korean light water reactors(LWRs). The estimated values were in fair agreement with the experimental results in spite of the uncertainty of the modeling parameters.

• Journal of Korea Foundry Society
• /
• v.25 no.1
• /
• pp.30-35
• /
• 2005

The structures and mechanical property of the unidirectionally solidified Al-Co eutectic alloy were investigated. Al-Co eutectic alloy was unidirectionally solidified with growth rates(R) between I cm/hr and 10 cm/hr in the induction furnace maintaining the thermal gradient (G) at solid-liquid interface, $32^{\circ}C$/cm. The eutectic microstructure was varied with the growth condition(G/R ratio). When the G/R ratio was larger than $8.5{\times}10^{3}^{\circ}C/cm^{2}/sec$, a lamellar structure was formed, But the G/R ratio was smaller than $8.5{\times}10^{3}^{\circ}C/cm^{2}/sec$, a colony structure was formed. It was found that the interlamellar spacing(${\lambda}$) was dependent on the growth rate(R) with the relationship, ${\lambda}^{2}{\cdot}R=constant$. The microhardness of this eutectic alloy increased with increase in the growth rate.