• Title/Summary/Keyword: rate of resistance increase

검색결과 687건 처리시간 0.034초

성형압력이 Soil-Cement의 강도 및 내구성에 미치는 영향에 관한 연구 (A Study on the Effects of Molding Pressure on the Compressive Strength and Durability of Soil-Cement Mixture)

  • 서원명;고재군
    • 한국농공학회지
    • /
    • 제20권1호
    • /
    • pp.4575-4591
    • /
    • 1978
  • In order to investigate the effects of grain size distribution, cement content, and molding pressure on the strength and durability of soil-cement mixtures, a laboratory test of soil cement mixtures was performed at four levels of cement content, five levels of molding pressure, and four levels of normal curing periods. The results are summarized as follows: 1. Optimum moisture contents in loam soil and maximum dry density in sand soil increased with the increase of cement content, but in others, both optimum moisture contents and maximum dry density were changed ununiformly. 2. When the specimens were molded with molding pressure, 50kg/$\textrm{cm}^2$, strength of soil cement mixture with cement content, 2 and 4 per cent, was lower than the strength of soil cement mixture without cement content by more than 40 to 50 per cent. 3. The strength of soil-cement molded with molding pressure, 100kg/$\textrm{cm}^2$, was higher than the strength of soil-cement molded with M.D.D. obtained from standard compaction test more than 40 per cent in sand loam cement and 50 per cent in loamy cement. 4. There was highly significant positive correlation among molding pressure, cement content and unconfined compressive strentgh and so the following multiple regression equations were obtained. Loam: fc=1.9693C+0.197P-0.84 Sandy loam: fc=2.9065C+0.235P-0.77 5. When the specimens were molded with molding pressure, 20 to 100kg/$\textrm{cm}^2$, the regression equation between the 28-day and 7-day strenght was obtained as follows. Loam : q28=1.1050q7+7.59(r=0.9147) Sandy loam : q28=1.3905q7+3.17 (r=0.9801) 6. At the cement contents of above 50 per cent, the weight losses by freeeze-thaw test were negligible. At the cement content of below 8 per cent the weight losses were singnificantly high under low molding pressure and remarkably decreased with the increase of molding pressure up to 80kg/$\textrm{cm}^2$. 7. Resistance to damage from water and to absorption of water were not improved by molding pressure alone, but when the soil was mixtured with cement above 6 per cent, damage seldoms occurred and absorbed less than 5 per cent of water. 8. There was highly significant inverse-corelationship between the compressive strength of soil cement mixtures and their freeze-thaw loss as well as water absorption. By the regression equation methods, the relationships between them were expessed as followed fc=-7.3206Wa+115.6(r=0.9871) log fc=-0.0174L+1.59(r=0.7709) where fc=unconfined compressive stregth after 28-days curing. kg/$\textrm{cm}^2$ Wa=water absorption, % L : freeze-thaw loss rate, %

  • PDF

운동이 유전자 조절물질에 미치는 영향에 관한 고찰 (A Review : On Exercise Performance Induction Gene Factors Change)

  • 엄기매;양윤권;김태우
    • 대한물리치료과학회지
    • /
    • 제8권1호
    • /
    • pp.745-758
    • /
    • 2001
  • The purpose of study to phenomenological examine and the mechanism regarding the gene(DNA, RNA, Protein) and sports to studied, analyzed. and evaluated. This review considers the evidence for genetic effects in several determinants of endurance performance and resistance performance, namely: body measurements and physique, body fat pulmonary functions, cardiac and circulatory functions, muscle characteristics. substrate utilization, maximal aerobic power and other. Moreover, the response to aerobic training of indicators aerobic work metabolism and endurance performance is reviewed, with emphasis on the specificity of the response and the individual differences observed in training ability. This study indicate that improvement of 'Enhancer Action' in RNA genes changed by exercise or sports. Moreover exercise was effect on Central Dogma with DNA makes RNA makes Protein. and think that occurred with exercise influence on skeletal muscle into cell have to Myosin Heavy Chain (MHC) changed was after exercise performance, which accompanied into skeletal muscle that were exercise-induces gene-modulation that is, take gene mutations. This study known that existed hormone(epinephrine)-immune system with interaction. Exercise were altered insulin binding and MAP Kinase signaling increased into immune cells. This review suggested that the high rate of glutamine utilization by cells of the immune system serves to maintain a high intra cellular concentration of the intermediates of biosynthetic pathways such that optimal rates of DNA, RNA and protein synthesis can be maintained. In the absence of glutamine, lymphocytes do not proliferate in vitro: proliferation increase greatly as the glutamine concentration increase. Glutamine is synthesized in skeletal muscle. Skeletal muscle and plasma glutamine levels are lowered by sepsis, injury, bums, surgery and endurance exercise and in the overtrained athlete. The study of result show that production of ET-1 is markedly increased tissue specifically in the heart by exercise without appreciable changes in endothelin-converting enzyme and endothelial receptor expressions, suggest that myocardial ET-1 may participate in modulation of cardiac function during exercise. Conclusionally, this study indicate that improvement of 'Enhancer Action' in RNA genes changed by exercise or sports. Moreover exercise was effect on Central Dogma with DNA makes RNA makes Protein. This study is expected to contribute the area of sports science, medicine, hereafter more effort is required to establish the relation between gene alters and exercise amount.

  • PDF

Plastic필름 포장에 따른 옥수수 전분과 분리 대두단백질의 이성분 혼합물의 흡습특성 (Sorption Characteristics of Binary Mixture of Corn Starch- Soy Protein Isolates in Plastic film Packaging)

  • 김덕웅;우상규
    • 한국식품영양과학회지
    • /
    • 제17권3호
    • /
    • pp.191-197
    • /
    • 1988
  • 전분가공식품의 주요 원료인 옥수수전분과 단백질강화 또는 육란백질의 대치 단백질인 분리대두단백질을 사료로 하여 전분-단백질의 이성분혼합비율을 오늘날 흔히 사용되고 있는 plastic flim으로 포장하여 상대습도 90%와 $40^{\circ}C$에서 포장재료의 성질이 흡습특성에 미치는 영향을 조사하였다. 포장재료별 투습도는 0.02mm LDPE필름이 $32.6g/m^2/24hrs$ 0.04mm LDPE필름이 $14.01g/m^2/24hrs,$ 0.02mm OPP 필름이 $7.30g/m^2/24hrs,$ 그리고 0.02mm LDPE /0.02 mmOPP coating필름이 $4.86g/m^2/24hrs,$로서 동일한 두께성에서 비교해 볼 때 LDPE필름보다 OPP필름이 습기의 차단성이 대략 4배이상 우수함을 알 수 있었다. 또 식품시료를 포장하여 저장하는 경우도 동일한 두께의 LDPE필름보다 OPP필름이 습기의 차단성이 우수하였다. 그리고 포장한 혼합물의 저장시간에 따른 흡습속도는 일반적으로 전분함량보다는 단백질함량이 많을수록 흡습속도가 크게 증가하는 것을 알 수 있었다.

  • PDF

전기 검출 시스템을 이용한 Microfluidic Immuno-Sensor Chip (Microfluidic Immuno-Sensor Chip using Electrical Detection System)

  • 맹준호;이병철;조철호;고용준;안유민;조남규;이성환;황승용
    • KSBB Journal
    • /
    • 제21권5호
    • /
    • pp.325-330
    • /
    • 2006
  • Bio-MEMS를 기반으로 microfilter와 백금 전극이 내재되어 있는 microbiochip을 제작하였다. 우리는 이 chip으로 microbead에 indirect ELISA 방법으로 항원-항체를 반응시키고 전기 신호 검출 방법을 이용하여 반응 여부를 판단하였다. 이 때 신호 증폭을 위해 silver enhancer를 사용하였다. Chip 상에서 항원-항체 반응 조건을 최적화하기 위해 pH, temperature, flow time, flow rate, silver enhancer time을 결정하였다. 이렇게 최적화된 조건을 바탕으로 짧은 시간 안에 소량의 시료로 immunoassay를 성공적으로 수행할 수 있었다. 전기 신호 검출 방식을 사용함으로써 biosensor 장비의 소형화와 다중 시료 측정과 자동화를 biosensor에서 적용할 수 있는 가능성을 제시하였다.

전자전달증대기를 이용한 고효율 태양전지 시스템에서 전자전달증대기 입력 교류 전압 변화에 따른 태양전지 효율 향상에 대한 연구 (Improvement of Solar Cell Efficiency according to AC Voltage Variation of Electron Relay Enhancer in High Efficient Solar Cell System using Electron Relay Enhancer)

  • 김학수;유영기;이혁;윤소영
    • 한국진공학회지
    • /
    • 제22권3호
    • /
    • pp.168-173
    • /
    • 2013
  • 본 연구에서는 기존의 상업용 태양전지에서 전자-정공 재결합을 최소화하여 태양전지의 효율을 향상시키는 부가장치인 전자전달증대기(Electron Relay Enhancer: ERE)를 소개한다. 전자전달증대기는 교류 전력 공급 장치와 연결된 두 개의 캐패시터와 전자의 흐름 방향을 제어하는 브릿지 다이오드 시스템으로 구성되어 있다. 두 개의 캐패시터는 브릿지 다이오드 시스템을 통하여 태양전지로부터 전자를 포집하고 포집된 전자를 로드저항이나 인버터쪽으로 펌핑하는 것을 반복한다. 양으로 대전된 한 개의 캐패시터가 전자를 포집하는 동안 음으로 대전된 다른 캐패시터는 전자를 펌핑한다. 태양전지에서 여기된 전자가 정공에 재결합되기 전에 양으로 대전된 캐패시터는 태양전지로부터 더 많은 여기된 전자를 끌어온다. 이러한 까닭에 ERE 시스템은 태양전지의 효율을 증대시킨다. 연구결과로 ERE 활성 시 태양전지의 증가된 전력은 각각의 실험조건에서 5.9 W에서 25.6 W사이였고, 가장 높은 태양전지전력증가율은 ERE 비활성 시 태양전지 전력의 30.8%였다.

Ovarian Features after 2 Weeks, 3 Weeks and 4 Weeks Transdermal Testosterone Gel Treatment and Their Associated Effect on IVF Outcomes in Poor Responders

  • Kim, Chung-Hoon;Ahn, Jun-Woo;Moon, Jei-Won;Kim, Sung-Hoon;Chae, Hee-Dong;Kang, Byung-Moon
    • 한국발생생물학회지:발생과생식
    • /
    • 제18권3호
    • /
    • pp.145-152
    • /
    • 2014
  • This study was performed to investigate the effect of of transdermal testosterone gel (TTG) on controlled ovarian stimulation (COS) and IVF outcomes and ovarian morphology according to pretreatment duration in poor responders. A total of 120 women were recruited for this pilot study. They were randomized into control, 2 weeks, 3 weeks or 4 weeks TTG treatment groups. For three TTG treatment groups, 12.5 mg TTG was applied daily for 2 weeks, 3 weeks or 4 weeks in preceding period of study stimulation cycle. After 3 weeks of TTG pretreatment, significant increase of antral follicle count (AFC) and significant decreases of mean follicular diameter (MFD) and resistance index (RI) value of ovarian stromal artery were observed (p=0.026, p<0.001, p<0.01, respectively). The total dose of rhFSH administered for COS significantly decreased after 3 and 4 weeks TTG treatment both compared with control group (p<0.001, p<0.001). The numbers of oocytes retrieved and mature oocytes were significanty higher in 3 and 4 weeks TTG treatment groups than control group (p<0.001, p<0.001 in the number of oocytes retrieved; p<0.001, p<0.001 in the number of mature oocytes). The clinical pregnancy rate and live birth rate were increased only in 4 weeks TTG treatment group compared with control group (p=0.030 and p=0.042, respectively). These data demonstrated that TTG pretreatment for 3 to 4 weeks increases AFC and ovarian stromal blood flow, thereby potentially improving the ovarian response to COS and IVF outcome in poor responders undergoing IVF/ICSI.

한약의 전이재발억제 효과에 관한 연구 (Study on inhibition effects on metastasis and recurrence of Traditional Herb Medicine(THM))

  • 이상섭;유화승;조정효;손창규;이연월;조종관
    • 대한한방종양학회지
    • /
    • 제9권1호
    • /
    • pp.75-87
    • /
    • 2003
  • Recently, the occurrence and death rates of cancer have increased rapidly. Metastasis and recurrence is the most important factor of death from cancer. So inhibition of recurrence and metastasis can increase the cure rate of cancer disease. At the basic chinese traditional medicine(TCM), there are a lot of theory related to neoplasm treatment. The metastasis and recurrence of neoplasm was the basis of yudu(餘毒) on remained neoplasm cell and stagnation of blood, thermotoxo, phlegm, asthenia of healthy enerngy and stagnation of vital energy. The principles therapy of neoplasm on metastasis and recurrence was based on knowledge of the method of support the healthy energy and strengthen the body resistance, promote blood circulation to remove blood stasis, clear away heat and toxic materials, dissipate phlegm and disperse the accumulation of evils. But the major clinical features of neoplasm was to be considered in developing a treatment plan include (1) distinguish between clinical and pathologic staging - acute and chronic, (2) classification of pathologic pattern, and (3) distingction of body situation : for examples asthenia - sthenia etc. It was most important to distinguish between supporting the healthy and eliminating the evil factors and to treat differently at the root and the branch cause of a neoplasm. This paper's results indicate that identification and effective use of THM can inhibite netastasis and recurrence and then it will help increasing survival rate. Also as BioTechnology(BT) has developed rapidly nowadays, as genes related to cancer have revealed. So it will give rise to the development of searching the mechanism of herb medicines which have inhibition effects of metastasis and recurrence.

  • PDF

냉해지대의 수도생육과 임, 불임인각의 양분흡수에 관한 연구 제3보 질소와 규산시용량의 차이가 인각의 양분흡수에 미치는 영향 (Studies on the Growth and Nutrient Uptaking of Flag Leaf and Chaff of Rice Plant in Cold Injury Location II, Influence of Different Nitrogen and Silicate Application on the Nutrient Uptaking of Chaff in Rice Plant)

  • 김연진;최수일;나종성;이종훈
    • 한국작물학회지
    • /
    • 제28권1호
    • /
    • pp.81-88
    • /
    • 1983
  • 산간부인 진안(해발 303m)에서 질소시비량과 규산조절량의 차이가 지엽 및 인각의 무기성분조성과 임실에 미치는 영향을 구명하였던 바 다음과 같은 결과를 얻었다. 1. 냉해지에서 건물생산을 높이기 위해서는 질소 15kg이상 수준은 불리하며 규산의 증시가 요망된다. 2. 질소의 과용은 지엽에 가용태질소농도를 높여 가리와 규산의 흡수를 조해하며 규산시용으로 도체의 내냉성을 강화시켜 수량을 증수시킬 수 있었다. 3. 질소시비량에 따른 임, 불임인각중에 함유된 성분중 전질소와 인산은 질소증시에 의하여 증가되며 가리, 칼슘은 질소 10-15kg을 정점으로 함유율이 높고 고토는 질소 소비구에서 높은 수치를 나타냈다. 그러나 규산은 어느 질소시비중에서도 증가하며 임, 불임인각중의 함유율은 임실인각이 6%나 높은 농도를 나타냈다. 4. 규산조절량에 따른 인각중 무기성분함유율은 규산을 증시할수록 전질소함유율은 낮아지고 인산, 가리, 칼슘, 규산은 증가되었다. 특히 불임인각의 함유율도 규산을 증시할수록 증가하며 규산 무시용구에서도 인각의 규산함유율이 높아 규산이 인각의 형태형성과 생리생태에 어떤 기작을 가지고 있을 것으로 여겨진다.

  • PDF

Tribological study on the thermal stability of thick ta-C coating at elevated temperatures

  • Lee, Woo Young;Ryu, Ho Jun;Jang, Young Jun;Kim, Gi Taek;Deng, Xingrui;Umehara, Noritsugu;Kim, Jong Kuk
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.144.2-144.2
    • /
    • 2016
  • Diamond-like carbon (DLC) coatings have been widely applied to the mechanical components, cutting tools due to properties of high hardness and wear resistance. Among them, hydrogenated amorphous carbon (a-C:H) coatings are well-known for their low friction properties, stable production of thin and thick film, they were reported to be easily worn away under high temperature. Non-hydrogenated tetrahedral amorphous carbon (ta-C) is an ideal for industrial applicability due to good thermal stability from high $sp^3$-bonding fraction ranging from 70 to 80 %. However, the large compressive stress of ta-C coating limits to apply thick ta-C coating. In this study, the thick ta-C coating was deposited onto Inconel alloy disk by the FCVA technique. The thickness of the ta-C coating was about $3.5{\mu}m$. The tribological behaviors of ta-C coated disks sliding against $Si_3N_4$ balls were examined under elevated temperature divided into 23, 100, 200 and $300^{\circ}C$. The range of temperature was setting up until peel off observed. The experimental results showed that the friction coefficient was decreased from 0.14 to 0.05 with increasing temperature up to $200^{\circ}C$. At $300^{\circ}C$, the friction coefficient was dramatically increased over 5,000 cycles and then delaminated. These phenomenon was summarized two kinds of reasons: (1) Thermal degradation and (2) graphitization of ta-C coating. At first, the reason of thermal degradation was demonstrated by wear rate calculation. The wear rate of ta-C coatings showed an increasing trend with elevated temperature. For investigation of relationship between hardness and graphitization, thick ta-C coatings(2, 3 and $5{\mu}m$) were additionally deposited. As the thickness of ta-C coating was increased, hardness decreased from 58 to 49 GPa, which means that graphitization was accelerated. Therefore, now we are trying to increase $sp^3$ fraction of ta-C coating and control the coating parameters for thermal stability of thick ta-C at high temperatures.

  • PDF

Li2ZrO3를 이용한 합성가스내의 CO2 제거 (Removal of CO2 in Syngas using Li2ZrO3)

  • 박주원;강동환;유경선;이재구;김재호;한춘
    • 공업화학
    • /
    • 제17권3호
    • /
    • pp.250-254
    • /
    • 2006
  • $Li_{2}ZrO_{3}$$CO_{2}$ 제거능을 평가하기 위하여 열중량분석기(thermogravimetric analyser, TGA)를 사용하여 실험하였고 $Li_{2}ZrO_{3}$를 이용한 $CO_{2}$ 제거반응시 $H_{2}$와 CO의 영향을 평가하기 위하여 충전층 반응기를 이용하여 실험하였다. $Li_{2}ZrO_{3}$$CO_{2}$ 제거반응 초기속도는 가스유량 증가에 따라 일정하게 증가하였고 가스유량 100 mL/min 이상에서 기체경막저항 소멸에 따라 일정하게 유지되었다. $Li_{2}ZrO_{3}$$CO_{2}$의 반응차수는 1차임을 확인했으며 최적온도 구간은 $500{\sim}600^{\circ}C$로 나타났으며, XRD와 SEM을 이용하여 $Li_{2}ZrO_{3}$의 구조를 살펴본 결과 결정구조의 $Li_{2}ZrO_{3}$와 다공성의 $Li_{2}CO_{3}$/$ZrO_{2}$로 구성되어 있음을 확인하였다. 또한 $CO_{2}$ 내의 $H_{2}$ 존재는 $CO_{2}$ 제거반응에 영향을 미치지 않지만 CO의 경우 $Li_{2}ZrO_{3}$상의 $Li_{2}CO_{3}$(L)에 흡착되는 $CO_{2}$의 수착을 억제하는 것으로 나타났다.