• Journal of Environmental Impact Assessment
• /
• v.24 no.1
• /
• pp.1-15
• /
• 2015

To mitigate the impacts of climate change on agricultural ecosystems, development of agricultural management for enhanced soil carbon sequestration is required. In this study, the effects of fertilizer types (chemical fertilizer and manure compost), cropping systems, and crop residue management on SOC(Soil Organic Carbon) sequestration were investigated. Summer corn and winter barley were cultivated on experimental plots under natural rainfall conditions for two years with chemical fertilizer and manure compost. Soil samples were collected conducted and analyzed for SOC for soil. To estimate long-term variation patterns of SOC, DNDC was run with the experimental data and the weather input parameters from 1981 to 2010. DNDC simulation demonstrated SOC reduction by chemical fertilizer treatment unless plant residues are returned; whereas compost treatments increased SOC under the same conditions and SOC increment was proportional to compost application rate. In addition, SOC further increased under corn-barley cropping system over single corn cropping due to more compost application. Regardless of nutrient input type, residue return increased SOC; however, the magnitude of SOC increase by residue return was lower than by compost application.

• Korean Journal of Ichthyology
• /
• v.10 no.1
• /
• pp.106-114
• /
• 1998

In order to estimate energy budget of the rockfish, Sebastes schlegeli juvenile, during the period from parturition to juvenile, of rockfish were reared at constant condition of water temperature($16^{\circ}C$ and $20^{\circ}C$). Energy used by the reared juveniles were calculated from estimates of data on growth, oxygen consumption, nitrogen excretion, feeding and energy content. After parturition, total length of juvenile was 4.56~5.49mm(average 4.97mm, n=20), and the average dally growth rates were 0.50mm at $20^{\circ}C$. The weight-specific oxygen consumption and nitrogen excretion rates decreased with increasing body weight. Temperature significantly affected oxygen consumption and nitrogen execretion rates, with the higher rates at $20^{\circ}C$ than $16^{\circ}C$. During the 25 days from parturition to jllveniles, feeding rates were 65.8cal at $16^{\circ}C$, and 89.2cal at $20^{\circ}C$. The assimilation effeciency estimated by nitrogen content of food and egested feces were 85.21% at $16^{\circ}C$ and $20^{\circ}C$. During the period from parturition to juvenile, energy was used the higher in body growth than in oxygen consumption. The gross growth efficiencies($K_1$)and net growth efficiencies($K_2$) of the rockfish, Sebastes schlegeli juvenile ranged from 43% to 47% and from 50% to 55%, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.2
• /
• pp.146-154
• /
• 1992

DDVP, malathion and diazinon ECs which differ in chemical compositions and moisture contents were formulated with nine emulsifiers, three solvents(xylene, cyclohexanone and DMF) and epichlorohydrin. For the studies of decomposition characteristics, these technicals and ECs were subjected to the test under elevated temperature at $54^{\circ}C$ for 15 days and $38^{\circ}C$ for 90 days respectively. DDVP technical was rapidly decomposed in early stage of thermoaccelerated test at $54^{\circ}C$, but the decomposition rate slowed down with time. As for malathion and diazinon technicals, the longer they were incubated, the more decomposed. The decomposed AI in ECs increased with solvent polarity. The increment of moisture content in ECs accelerated the decomposition of AI, and that was remarkable especially in diazinon ECs. Addition of emulsifiers increased the moisture content to be accelerated the decomposition of AI, but the decomposition of AI was more affected by the kind of emulsifier than by the moisture content of emulsifier, Stabilizing effect by epichlorohydrin was distingished in malathion and diazinon ECs, but there was no effect in other solvent-based formulation except xylene.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.187-196
• /
• 2005

Since the allowable bearing capacities of piles in weathered/fractured rock are mainly governed by settlement, the load-displacement behavior of pile should be known accurately. To predict pile head settlement at the design stage, the exact understanding of the load-transfer mechanisms is essential. Therefore, in this research, the load-transfer mechanism of drilled shaft socketed into weathered rock was investigated. For the investigation, five cast-in-place concrete piles with diameters of 1,000 mm were socketed into weathered gneiss. The static axial load tests and the load-transfer measurements were performed to examine the axial resistant behavior of the piles. A comprehensive field/laboratory testing program on weathered rock at the Held test sites was also performed to describe the in situ rock mass conditions quantitatively. And then, the effect of rock mass condition on the load transfer mechanism was investigated. The f-w (side shear resistance-displacement) curve of the pile in moderately weathered rock reached to yielding point at a for millimeter displacements, and after yielding point, the rate of resistance increment dramatically decreased. However, the f-w curve in the highly/completely weathered rock did not show the obvious yielding point, and the resistance gradually increased showing the hyperbolic pattern until relatively high displacement (>15 mm). The q-w (end bearing resistance-displacement) curves showed linear response at least until the base displacement of approximately 10 mm, regardless of rock mass conditions.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.3-9
• /
• 2016

The leaching behavior of gold from waste CPU chip using Iodide/Iodine solution was studied. The direct leaching of gold with Iodide/Iodine solution for CPU chip under the size of 150 mesh showed leaching ratio of 20%. It was assumed that the copper film was produced on the gold particle during grinding process and the copper film prevents lodine/Iodide solution from contacting with leachable gold. Meanwhile, the extraction of gold was improved to 90% by pretreatment process with $HNO_3$ solution. In order to explain the result, EDS and ICP analysis for the leaching residue were conducted. It was found that the copper coated on the surface of the gold particle was removed about 80% by $HNO_3$, resulting in the increment of gold leaching rate.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.1
• /
• pp.82-90
• /
• 2011

Reactive reductants of cement/Fe(II) systems in dechlorinating chlorinated hydrocarbons have not been identified. The previous studies showed that a hematite/CaO/Fe(II) system had TCE degradation characteristics similar to those of cement/Fe(II) systems with regard to degradation kinetics and that lime (CaO) plays an important role in enhancing the reactivity for TCE dechlorination. The current study shows identified the formation of gypsum ($CaSO_4$) in the hematite/CaO/$FeSO_4$ system through the XRD analysis. The amounts of the gypsum increased with increment of the initial CaO dose. However, when CaO in the hematite/CaO/$FeSO_4$ system was replaced with gypsum, TCE degradation was not observed. Ca-removed Portland cement extracts (CPCX) in combination with $FeSO_4(CPCX/FeSO_4)$ showed no TCE degradation. On the other hands, the Portland cement extracts (PCX) in the presence of $FeSO_4(PCX/FeSO_4)$ and CPCX/CaO/$FeSO_4$ systems degraded 0.2 mM TCE within 5 days, indicating that CaO also played an important role dechlorination reactions in the systems. The pseudo-first-order rate constants (k) of the CPCX/CaO/$FeSO_4$ systems were 0.20, 0.24, and 0.72 $day^{-1}$, when the CaO dosages were 25, 50 and 75 g/L, respectively. The XRD analyses showed identified the common peaks having the d-values of 3.02, 2.27, and 1.87 in the reaction systems that showed TCE degradation. However, it was not possible to clearly identify the crystalline minerals having the three peaks from the references in JCPDS cards. This study reveals that the reactive agents in the cement/Fe(II) and the hematite/Fe(II) systems are likely to be those containing CaO and Fe(II).

• Journal of Chest Surgery
• /
• v.29 no.1
• /
• pp.1-6
• /
• 1996

We developed an experimental model of brain death using dogs. Brain death was induced by increasing the intracranial pressure (ICP) gradually by continuous Infusion of saline through an epidural Foley catheter in 5 mongrel dogs (weight, 18~22kg). Hemodynamic and electrocardiographic changes were evaluated continuously during the process of brain death and obtained the following results. 1. The average volume and time required to induce brain death was 4.8$\pm$1.0ml and 143.0$\pm$30.9minutes respectively. 2. There was a steady rise of the ICP after starting the constant infusion of saline, and ICP rised continuously until the brain death (122.0$\pm$62.5mmHg). After reaching to the maximal value (125.0$\pm$47.7mmHg) at 30 minutes after brain death, the ICP dropped and remained approximately constant at the slightly higher level than the mean arterial pressure (MAP). 3. MAP showed no change until the establishment of brain death and it declined gradually. The peak heart rate reached to 172.6$\pm$35.3/min at 30 minutes after the brain death. 4. Even though the body temperature and all hemodynamic variables, such as cardiac output, mean pulmonary arterial pressure, left ventricular (LV) end-diastolic pressure and LV maximum + dp/dt, were slightly greater than those of basal state, at the point of brain death, there was no statistically significant change during t e process of brain death. 5. There was no remarkable arrhythmias during the experiment except ventricular premature beats which was observed transiently in one dog at the time of brain death. Hemodynamic changes in the brain death model induced by gradual ICP increment were inconspicuous, and arrhythmias were rarely seen. Hyperdynamic state, which was observed at the point of brain death in another brain death model caused by abrupt ICP increase, was not observed.

• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.33-39
• /
• 1985

This study was performed to investigate the damage to the primary production of Pinus thunbergii forest from air pollution around the Yeochon Industrial Estate. The data were observed at 6 sites in the vicinity of the above area. The vitality of pine trees and the accumulation of the soluable sulfur and the fluorine were analyzed. Their value was generally increased near the source of air pollutants. The biomass density and annual net production were $1.01kg/m^3$, 5.90 t/ha/yr in the stand 4 respectively and $0.66kg/m^3$, 0.32t/hr/hr in the stand 3 respectively. The net assimilation rate was 0.4 - 1.6 kg/kg/yr and the efficiency of leaf to produce stem was 0.3 - 1.3 kg/kg/yr. The annual growth percentage of volume was 16.0% at the slightly damaged area and 4.0% at the severly damaged area. The maximum mean annual increment per tree was $0.0040m^3$ and $0.0008m^3$ in same order.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.3
• /
• pp.193-200
• /
• 2010

Current rose cultivars are all composed of heterozygous genome due to long history of out crossing including interspecific hybridization. It has been adapted by artificial selection and crossing by breeders that mainly based on the crossing with fertile pollen derived from inter- or intra-specific hybridization. Pollen viability and germination ability tests provide valuable information for the designing of parentage for more successful breeding efficacy. In this study, we tested the pollen viability and germination ability in seven rose cultivars to find any relationship among several factors including pollen size, ploidy levels, and crossing compatibility. The pollen viability showed wide ranges from 39% 'Pinocchio' as minimum to 82% 'Scarlet Mimi' as maximum, whereas pollen germination rate were from 1% 'Mini Rosa' to 41% 'Scarlet Mimi' as a highest. Pollen size ranged from 41.3 to $45.4{\mu}m$ in large sized pollen and 30.7 to $37.4{\mu}m$ in small sized pollen. The mean diameter of large sized pollen is approximately 10-40% bigger than that of small sized pollen. There are positive relationships among ploidy level, total chromosome length, and pollen size. Crossing list showed that seed setting ratio and seed germination were related to pollen viability, pollen germination, and ploidy level.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.994-1001
• /
• 2012

The Effects of operating variables on reactivity of two $CO_2$ absorbents (PKM1-SU and P4-600) for SEWGS process were investigated in a pressurized fluidized bed reactor. For both $CO_2$ absorbents, $CO_2$ sorption capacity decreased as the number of absorption-regeneration cycles increased. PKM1-SU absorbent represented higher $CO_2$ sorption capacity than that of P4-600 absorbent. However, P4-600 absorbent represented better performance than PKM1-SU absorbent from the view points of regeneration temperature and regeneration rate. For PKM1-SU absorbent, $CO_2$ sorption capacity increased as the steam concentration increased. However, $CO_2$ sorption capacity increased initially as the steam concentration increased from 5% to 10%, but maintained thereafter for P4-600 absorbent. For both $CO_2$ absorbents, $CO_2$ sorption capacity increased as the final regeneration temperature increased. For PKM1-SU absorbent, $CO_2$ sorption capacity increased as the pressure increased and the increment tendency was drastic at higher pressure than 15 bar.