• Environmental Analysis Health and Toxicology
• /
• v.19 no.2
• /
• pp.177-182
• /
• 2004

Alcohol consumption and exposure to endocrine disruptors and industrial solvents have been implicated in impaired spermatogenesis, increase in the incidence of malformed sperm and decrease in the percentage of moving sperm. The aim of this study was to determine and compare the direct effects of some organic solvents(bisphenol A; BPA, dibutyl phthalate; DBP, formaldehyde; HCHO, dimethylsulphoxide; DMSO, ethanol) on mucus penetration distance, motility and survival rate of human sperm in vitro. Semen samples from 3 health subjects were prepared using swim-up method and 0.0005-0.5% organic solvents were added to the test medium. BPA, DBP, HCHO and DMSO produced significant decreases in the motility and survival rate with a different potency. The most potent inhibition of mucus penetration distance, motility and survival rate was observed after exposure to HCHO. A concentration of 0.0005% HCHO significantly inhibited sperm motility. When ethanol m.: added directly to sperm, at concentrations equivalent to that in serum after heavy drinking, these damaging effects were lowest compared with other solvents. Present study shows that each compound has different toxic potency to human sperm and we need special caution for the use of HCHO.

• Korea-Australia Rheology Journal
• /
• v.14 no.2
• /
• pp.63-70
• /
• 2002

Chemical mechanical planarization (CMP) is the polishing process enabled by both chemical and mechanical actions. CMP is used in the fabrication process of the integrated circuits to achieve adequate planarity necessary for stringent photolithography depth of focus requirements. And recently copper is preferred in the metallization process because of its low resistivity. We have studied the effects of chemical reaction on the polishing rate and surface planarity in copper CMP by means of numerical simulation solving Navier-Stokes equation and copper diffusion equation. We have performed pore-scale simulation and integrated the results over all the pores underneath the wafer surface to calculate the macroscopic material removal rate. The mechanical abrasion effect was not included in our study and we concentrated our focus on the transport phenomena occurring in a single pore. We have observed the effects of several parameters such as concentration of chemical additives, relative velocity of the wafer, slurry film thickness or ash)tract ratio of the pore on the copper removal rate and the surface planarity. We observed that when the chemical reaction was rate-limiting step, the results of simulation matched well with the experimental data.

• Structural Engineering and Mechanics
• /
• v.44 no.6
• /
• pp.801-814
• /
• 2012

The strain rate effects on the interaction between a Mode I matrix crack and an inclined elliptic matrix-inclusion interface under dynamic tensile loadings were investigated numerically, and the results are in agreement with previous experimental data. It is found, for a given material system, that there are the first and the second critical strain rates, by which three kinds of the subsequent crack growth patterns can be classified in turn with the increasing strain rate, namely, the crack deflection, the double crack mode and the perpendicular crack penetration. Moreover, such a crack deflection/penetration behavior is found to be dependent on the relative interfacial strength, the inclined angle and the inclusion size. In addition, it is shown that the so-called strain rate effect on the dynamic strength of granule composites can be induced directly from the structural dynamic response of materials, not be entirely an intrinsic material property.

• Phonetics and Speech Sciences
• /
• v.12 no.2
• /
• pp.17-27
• /
• 2020

This paper examines kinematic characteristics of /pk/ clusters, as compared to /kk/ and /pp/ with varying vowel contexts and speech rate. The results of EMMA data from eight Seoul-Korean speakers indicate as follows. Firstly, comparing /pk/ to /pp/ sequences, lips closing movement was faster and spatially greater in the /a/-to-/a/ context while temporally longer in the /i/-to-/i/ context. It was smaller in spatial displacement and shorter in temporal duration in /pk/ sequences. Peak velocity did not vary. Secondly, comparing /pk/ with /pp/ and /kk/ controls, lip aperture was less constricted in the /a/-to-/a/ context than /i/-to-/i/, but the maximum contact between the upper and lower lips was invariant across different vocalic contexts within /pk/ sequences (/apka/=/ipki/). Categorical reduction of C1 in /pk/ sequences fell in with the low-vowel and fast-rate conditions with across-/within-speaker variability. Gradient reduction of C1 was observed in all C1C2 types, being more frequent in fast rate. Lastly, the jaw articulator was a stable indicator of rate effects. The implication of the current study is that gestural reduction occurs with categorical reduction and general spatiotemporal weakening in the assimilating contexts, while quantitative properties of gestures may be a reason for gradient reduction, not necessarily confined to place assimilation.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.7
• /
• pp.393-402
• /
• 2021

This study aims to examine whether symmetric effects or asymmetric effects of exchange rates exist in determining the money demand in Indonesia. Simple-sum money and Divisia money were included in different models for comparison due to the financial developments in Indonesia. This study uses time-series data from 1996Q1 to 2019Q4 for the estimation. The nonlinear autoregressive distributed lag (NARDL) model is utilized to verify the asymmetric effects of exchange rates on money demand. The Augmented Dickey-Fuller and Phillips-Perron unit root tests were performed to verify the order of integration of the variables. The findings of this study revealed that the exchange rate is one of the most important determinants of money demand in Indonesia and the effect is asymmetric. The findings further indicated that money demand function, which incorporates Divisia monetary aggregate is parsimonious. Monetary targets such as money supply and interest rates are critical for monetary policy conduct to achieve inflation levels set by government. As the adoption of an inflation targeting framework needs to be in keeping with the flexible exchange rate system, the asymmetric effect of exchange rate changes can be used in exchange rate policy conduct to achieve financial system and price stability.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.52-55
• /
• 2000

The effects of environmental conditions, initial dissolved oxygen concentrations, pH, and the presence of electron carrier vitamin B$_{12}$ , on the reduction rate of TNT by Fe$^{0}$ was Quantitatively analyzed using a batch reactor. In all experiments, TNT reduction was best described with a first order reaction and the reduction rate decreased with the increase in the initial DO concentration. However, the specific reaction rate did not decrease linearly with the increase in the initial DO concentration. In the presence of HEPES buffer 0.2 and 2.0 mM(pH 5.7$\pm$0.2), the specific reaction rate increased more than 5.8 times, which showed reduction rate is rather significantly influenced by the pH of the solution. To test the possibility of reaction rate enhancement, well-known electron carrier(or mediator), vitamin B$_{12}$ has augmented besides Fe$^{0}$ . In the presence of 8.0 $\mu\textrm{g}$/L of vitamin B$_{12}$ , the specific reaction rate increased as much as 14.6 times. The results indicate that the addition of trace amount of vitamin B$_{12}$ can be a promising rate controlling option for the removal of organics using a Fe$^{0}$ filled permeable reactive barrier.

• Journal of Biosystems Engineering
• /
• v.34 no.1
• /
• pp.30-36
• /
• 2009

This study was performed to determine the effect of drying conditions on the germination properties of rapeseed after seeds were dried under different drying conditions: $40^{\circ}C$, $50^{\circ}C$, or $60^{\circ}C$ in combination with 30%, 45%, or 60% relative humidity. As analytic results, drying conditions had significant effects (P-value < 0.001) and drying temperature was considered as the main factor on the germination properties of rapeseed. When drying temperature increased or relative humidity decreased, the vigor rate and germination rate decreased, the median germination time increased. The maximum values of vigor rate and germination rate were 90% and 95.44%, and their minimum values were 60.17 and 75%, respectively. To ensure the standard germination rate of 85%. The appropriate drying zone was determined and the drying temperature should be less than $51.0^{\circ}C$, $54.5^{\circ}C$ and $58.7^{\circ}C$ at 30%, 45% and 60% RH, respectively. The values for median germination time varied from 2 to 4 days. The predicted models of germination rate, vigor rate, and median germination time were determined.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.103-111
• /
• 1987

Understanding grain filling characteristics represented by grain filling duration and grain filling rate is import-ant in improving higher yielding varieties and developing better cultural methods of rice (Oryza sativa L.). Recently developed 6 Japonica and 6 Japonica/Indica varieties were grown under 3 nitrogen levels at Experimental Farm of Chungbuk National University in 1986. The range of grain filling duration of 12 varieties was 20.9-39.0 days, while grain filling rate ranged from 53.8 to 136.6 mg. panicle$^{-1}$. day$^{-1}$. Although the difference of the average grain filling duration between Japonica varieties and Japonica/Indica was less than 4 days, the average grain filling rate of Japonica/lndica varieties was greater than Japonica more than 30%. Samgangbyeo showed the shortest grain filling duration of 21.0-24.2 days and the greatest grain filling rate of 119.3-143.8 mgㆍpanicle$^{-1}$. day$^{-1}$ under 3 nitrogen levels, while Seomjinbyeo and Milyang 23 showed the quite opposite grain filling characteristics. Nitrogen levels did not show any significant effects on grain filling characteristics. Negative correlation was round between grain filling duration and grain filling rate, and significant positive correlations of grain filling rate with grains/panicle, grain weight and panicle weight indicated that grain filling rate is more important characteristics of grain filling. Pathway analysis revealed that contribution of grain filling rate to panicle weight is rather indirect through grain weight.

• Fisheries and Aquatic Sciences
• /
• v.24 no.12
• /
• pp.415-427
• /
• 2021

Wetland ecosystems act as natural freshwater purification systems, but their rich biodiversity is being threatened with the introduction of the non-native freshwater snail, Pomacea canaliculata. This study was conducted to measure the herbivory effects and growth rate of P. canaliculata on common macrophytes: Ipomoea aquatica, Ipomoea batatas, Pandanus amaryllifolius and Cucurma longa. In separate experiments, the macrophyte species were served as the snails' food as individual species and simultaneously. In the individual treatment, the growth pattern and rate were based on the snails' weight (mg/snail/day; n = 9) while the individual feeding consumption (mg/snail/day) was calculated from the leftover food. In the simultaneous treatment, the herbivory effects were evaluated as the feeding preference (%) from observations every two hours, while the total feeding consumption (mg) was calculated based on the food remaining after a 12-hour experiment (3 replicates: total n = 27). The results indicated that the growth pattern was significant for snails grazing on I. aquatica but not when other macrophyte species were eaten. The individual feeding consumption was higher when using I. aquatica than P. amaryllifolius but the growth rate for snails grazing on I. aquatica and P. amaryllifolius did not differ significantly. Meanwhile, the consumption of C. longa deterred the snails' growth rate. Although the snails consumed all the macrophytes in the individual experiment, when given the species simultaneously, the feeding preference and total feeding consumption were directed significantly more toward I. aquatica than P. amaryfollius and C. longa. We conclude that P. canaliculata is a generalist feeder given a limited choice of food but tends to show a strong feeding preference after being introduced to more food choices. These findings indicate that the introduction of P. canaliculata into wetland ecosystems may increase the herbivory effects on macrophytes, making these ecosystems vulnerable to the impact of eutrophication and biodiversity reduction.

• The KSFM Journal of Fluid Machinery
• /
• v.1 no.1 s.1
• /
• pp.41-48
• /
• 1998

This study was carried out to investigate the effect of design parameters on the volume flow-rate and the noise level and to finally find the optimal design variables. Eighteen cross-flow fans were designed by the method of orthogonal array, and the flow-rate and the noise level were measured. These data were analyzed by the neural network system. The effects of eight design variables(scroll exit angle, scroll arc length et al.) on the fan performance and the noise level were valuated and discussed. This experiment shows that the design solutions suggested by neural network system may increase its volume flow-rate and reduce noise simultaneously.