• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.128.2-128.2
• /
• 2005

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.179-182
• /
• 2007

The compressive fatigue tests on the closed cell Al-Si-Ca alloy foams with two different thicknesses were performed using a load ratio of 0.1. The quasi-static and cyclic compressive behaviors were obtained respectively. The fatigue stress-life (S-N) curves were evaluated from the obtained cyclic compressive behaviors. S-N curves were presented for the onset of progressive shortening. It turned out that the fatigue strength showed higher value for the thicker foam and the onset of shortening of thinner foam took place earlier. The crushing was found to initiate in a single band which broadens gradually with additional fatigue cycles. Progressive shortening of the specimen took place due to a combination of low cycle fatigue failure and cyclic ratcheting.

• Structural Engineering and Mechanics
• /
• 제28권5호
• /
• pp.495-514
• /
• 2008

In this paper, experimental and theoretical investigations of the effect of the mean moment on the response and collapse of circular thin-walled tubes subjected to cyclic bending are discussed. To highlight the influence of the mean moment effect, three different moment ratios r (minimum moment/ maximum moment) of -1, -0.5 and 0, respectively, were experimentally investigated. It has been found that the moment-curvature loop gradually shrinks with the number of cycles, and becomes stable after a few cycles for symmetric cyclic bending (r = -1). However, the moment-curvature loop exhibits ratcheting and increases with the number of cycles for unsymmetric cyclic bending (r = -0.5 or 0). In addition, although the three groups of tested specimens had three different moment ratios, when plotted in a log-log scale, three parallel straight lines describe the relationship between the controlled moment range and the number of cycles necessary to produce buckling. Finally, the endochronic theory combined with the principle of virtual work was used to simulate the relationship among the moment, curvature and ovalization of thin-walled tubes under cyclic bending. An empirical formulation was proposed for simulating the relationship between the moment range and the number of cycles necessary to produce buckling for thin-walled tubes subjected to cyclic bending with different moment ratios. The results of the experimental investigation and the simulation are in good agreement with each other.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.756-763
• /
• 2007

The majority of catastrophic wheel failures are caused by surface opening fatigue cracks either in the wheel tread or wheel flange areas. The inclined cracks at railway wheel tread are initiated and the cracks are caused by wheel damage-spatting after 60,000 km running. Because the failured railway wheel is reprofiled before regular wheel reprofiling, the maintenance cost for the railway wheel is increased. Therefore, it is necessary to analyze the mechanism for initiation of crack. In the present paper, the combined effect on railway wheels of a periodically varying contact pressure and an intermittent thermal braking loading is investigated. To analyze damage cause for railway wheels, the measurements for replication of wheel surface and the effect of braking application in field test are carried out. The result shows that the damages in railway wheel tread are due to combination of thermal loading and ratcheting.

• 통상정보연구
• /
• 제11권3호
• /
• pp.239-262
• /
• 2009

This study shed light on the status of Korean Kimchi industry in overseas markets and presented methods for promoting Kimchi industry of Gwangju Jeonnam metropolitan city and stimulating the export of Kimchi produced in Gwangju Jeonnam, a city that has come to the fore as the center of Kimchi industry, which aimed to explore the ways of ratcheting up competitiveness of Kimchi industry in the global market as Kimchi has become more likely to be globalized amid the recent "Korea Trend" boom and the growing consumption of fermented food. Therefore, methods for promoting Kimchi industry and stimulating the export of Kimchi should be explored to ensure the promotion of Kimchi industry and the stimulation of the export of Kimchi, ultimately restoring the status of Korea as the home of Kimchi, in consideration of the great spillover effect on the regional economy, through a series of measures such as the clusterization of Kimchi industry, expansion of cultural experience projects related to Kimchi for the globalization and the increased consumption of Kimchi, government support to increase Kimchi companies in size and achieve the modernization of Kimchi companies, introduction of Kimchi KS audit system and quality certification system, development of new product targeting global market and making Kimchi a high-end product, expansion of export, support of export market diversification, assurance of safety and price competitiveness of Kimchi, differentiated production and marketing strategy by means of technological research, and others.