• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.179-182
• /
• 2002

Rapid Prototyping (RP) technologies provide the ability to fabricate initial prototypes from various model materials. Stratasys' Fused Deposition Modeling (FDM) is a typical RP process that can fabricate prototypes out of plastic materials, and the parts made from FDM were often used as load-carrying elements. Because FDM deposits materials in about $300\mutextrm{m}$ thin filament with designated orientation, parts made from FDM show anisotropic material properties. This paper proposes an analytic model to predict the tensile strength of FDM parts. Applying the Classical Lamination Theory, which was developed for laminated composite materials, a computer code was implemented. Tsai-Wu failure criterion was added to the code to predict the failure of the FDM parts. The tensile strengths predicted by the analytic model were compared with experimental data. The data and prediction agreed reasonably well to prove the validity of the model. In addition, a web-based advisory service was developed to provide to strength prediction and design rules for FDM parts.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.57-58
• /
• 2012

• 한국컴퓨터정보학회논문지
• /
• 제18권5호
• /
• pp.147-156
• /
• 2013

현대 사회의 각 분야는 산업화와 과학기술의 발전으로 빠르게 변화한다. 그러나 빠른 사회 변화의 부작용으로 다양한 문제가 발생하고 있는데, 그 중 범죄는 큰 문제이다. 본 논문은 범죄를 예측하기 위한 모델로 마코프 체인을 적용한 범죄 예측 모델링을 제안한다. 기존의 마코프 체인 모델링은 한 사건의 전체 상태만으로 미래 예측 확률을 구하였으나, 본 논문은 사건 발생 확률 예측을 높이기 위해 전체 상태 예측 확률과 최근 상태 예측 확률로 나누었다. 그리고 전체 상태 예측 확률과 최근 상태 예측 확률의 평균값을 적용하여 미래 예측 확률 모델링으로 구현했다. 데이터는 범죄 발생 건수를 적용하였다. 그 결과 전체 상태만을 대상으로 예측확률을 적용 하였을 때 보다, 전체 상태와 최근상태로 나누어 확률 값을 구한 후, 그 평균값을 예측 확률로 적용하였을 때, 범죄 발생 예측에 근접하다는 결론을 얻었다.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.104-111
• /
• 2000

A fuzzy logic Run-by-Run(RbR) controller and an in -line wafer characteristics prediction scheme for the rapid thermal processing system have been developed for the study of process repeatability. The fuzzy logic RbR controller provides a framework for controlling a process which is subject to disturbances such as shifts and drifts as a normal part of its operation. The fuzzy logic RbR controller combines the advantages of both fuzzy logic and feedback control. It has two components : fuzzy logic diagnostic system and model modification system. At first, a neural network model is constructed with the I/O data collected during the designed experiments. The wafer state after each run is assessed by the fuzzy logic diagnostic system with featuring step. The model modification system updates the existing neural network process model in case of process shift or drift, and then select a new recipe based on the updated model using genetic algorithm. After this procedure, wafer characteristics are predicted from the in-line wafer characteristics prediction model with principal component analysis. The fuzzy logic RbR controller has been applied to the control of Titanium SALICIDE process. After completing all of the above, it follows that: 1) the fuzzy logic RbR controller can compensate the process draft, and 2) the in-line wafer characteristics prediction scheme can reduce the measurement cost and time.

• 한국멀티미디어학회논문지
• /
• 제25권3호
• /
• pp.510-518
• /
• 2022

This paper confirmed the technical reliability of mobile-based sarcopenia prediction and monitoring system. In implementing the developed system, we designed using only sensors built into a smartphone without a separate external device. The prediction system predicts the possibility of sarcopenia without visiting a hospital by performing the SARC-F survey, the 5-time chair stand test, and the rapid tapping test. The Monitoring system tracks and analyzes the average walking speed in daily life to quickly detect the risk of sarcopenia. Through this, it is possible to rapid detection of undiagnosed risk of undiagnosed sarcopenia and initiate appropriate medical treatment. Through prediction and monitoring system, the user may predict and manage sarcopenia, and the developed system can have a positive effect on reducing medical demand and reducing medical costs. In addition, collected data is useful for the patient-doctor communication. Furthermore, the collected data can be used for learning data of artificial intelligence, contributing to medical artificial intelligence and e-health industry.

• 한국축산식품학회지
• /
• 제42권4호
• /
• pp.655-671
• /
• 2022

There are differences of spectral characteristics between different types of meat cut, which means the model established using only one type of meat cut for meat quality prediction is not suitable for other meat cut types. A novel portable visible and near-infrared (Vis/NIR) optical system was used to simultaneously predict multiple quality indicators for different commercial meat cut types (silverside, back strap, oyster, fillet, thick flank, and tenderloin) from Small-tailed Han sheep. The correlation coefficients of the calibration set (R_c) and prediction set (R_p) of the optimal prediction models were 0.82 and 0.81 for pH, 0.88 and 0.84 for L^*, 0.83 and 0.78 for a^*, 0.83 and 0.82 for b^*, 0.94 and 0.86 for cooking loss, 0.90 and 0.88 for shear force, 0.84 and 0.83 for protein, 0.93 and 0.83 for fat, 0.92 and 0.87 for moisture contents, respectively. This study demonstrates that Vis/NIR spectroscopy is a promising tool to achieve the predictions of multiple quality parameters for different commercial meat cut types.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.45-50
• /
• 2002

Use of a phenomenological model, developed far prediction of catalytic deactivation, is demonstrated in comparing harshness of different driving cycles that are currently used to rapidly age catalytic converters on engine test benches. The model shows that seemingly equivalent driving cycles cause the catalytic converters to reach significantly different levels of deactivation. The comparison of the model prediction with the limited vehicle data seems encouraging despite the simplicity of the model at the current stage of its infancy.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.115-120
• /
• 2012

In order to establish preventive maintenance standards through analysis & reliability prediction of about 60,000pcs of 20kindsof relays and contractors used for Seoul subway trains, several life prediction methodologies were applied. Firstly, Occurrence, Severity, Detection were defined and predicted by applying operation characteristic of EMU to the number of actions of relays & contactors which the manufacturers generally offer as the life cycle data. Secondly, failure distribution and average life of parts were analyzed through interpretation of field data based on a lot of experience which had built up in the field for a long time. Finally, using the 217PLUS standard as a reliability prediction program, comparative analysis of use reliability and inherent reliability was done through reliability prediction at the part level and system level.

• 대한인간공학회지
• /
• 제12권1호
• /
• pp.17-24
• /
• 1993

Today, rapid development and timeliness of introducing a new product be- comes a more influencing factor of determing its competitive power due to a shortened product cycle, while rapid improvement of manufacturing technology makes product design and manufacturing fuse together. This implies that prod- uct usability evaluation and improvement starts right from its design phase, resulting in less development time and cost. To make this possible, proper as- sessment of human reach is one of essential functions for ergonomic product us- ability evaluation, specifically in the platform of computer-aided ergonomic evaluation models or any CAD system with a built-in man model. In this study, an analytic reach prediction algorithm ensuring the posture that human naturally takes, is presented by employing the methods developed for robot kinematics. Among robot kinematic methods for solving the multi-link system, the resolved motion method was found to be effective to solve human reach as a redundant manipulator model. Also, the joint range availability was used as a performance fonction to guarantee human naturalness. The result is expected to be directly applicable to product usability evaluations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.440-443
• /
• 2003

Recently, with the rapid growth of industry, environmental condition became worse. With the mix of the various contaminants, such as, salts, dust and industrial pollutants, synergy effect could be happened. So, many researches have been focused on the issue. The cause of natural accident could be classified as, lightning, rainstorm and contamination. However, the accident by contamination influences on the larger area than that by lightning, and, in the case of rapid contamination, it takes a shorter time than rainstorm. The salt contaminant is one of the most representative pollutants, and known as the main source of the accident by contamination. So, in this investigation we make a research on the prediction of contamination degree through the relationship analysis between the climatic factor and ESDD.