• Journal of the Ergonomics Society of Korea
• /
• v.19 no.1
• /
• pp.37-48
• /
• 2000

Universal design is an approach to create environments and products that recognizes the diversity of users, regardless of their ability or age. Recently, old person and disabled person rapidly go on increasing in number. So, universal design concept becomes more and more important in product and environment, etc. In this study, we dealt with the universal design problem of microwave oven considering old persons. New design model for microwave oven was developed and evaluated using human factors approach. The principles of universal design was developed through literature survey and questionnaire survey for old persons, and then design alternatives were developed according to these principles. Two experiments were performed in this study. The purpose of the first experiment was to select final design alternative and the experiment was performed using rapid prototypes. The second one was a usability testing for the real model of final alternative. In this experiment, the real model was compared with the existing real product. As the result, the new design model was a little more excellent than the existing model in usability.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.4
• /
• pp.1-11
• /
• 2008

This research presents a study for the knowledge-based configuration design development of a RC (remote control) helicopter. Parametric design and knowledge based design concepts are introduced for rapid design changes and analyses using commercial CAD software, CATIA(R) Knowledgeware module. It is crucial for RC helicopter design because it enables rapid conceptual design through instant configuration changes. Positions and dimensions of RC helicopter parts were used as design parameters. As an example, positions of CG(center of gravity) points were traced and plotted as the configuration changes. Further research should be performed in areas of user interfaces and web-based multi-user environments instead of using Excel data sheets.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.453-456
• /
• 2005

In this paper, design of speed observer and controller for AC servo system by rapid design system(RG-01D) using DSP of Realgain company is introduced. 'AC Servo-Designer' system, including CEMTool/SIMTool S/W, RG-DSOPIO board, AC servo driver and AUTOTool program, is used in this research. Because 'AC Servo-Designer' system can use SIMTool blocks to design and implement various controller in short time, speed observer and controller for AC servo system is easily designed and implemented according to control objectives.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.95-99
• /
• 2001

We can embody a variable size of high classic industrial material. and jewelry design within 5 hours. using a rapid prototype 3D CAD, which includes 30 kinds of database selected by jewelry designers. If the jewelry can be investigated and the customer can modify it right away ; then the qualify of the jewelry is much better. Based on our investigation. we can reduce 30$\%$ of the development cost by using a standard database. We can also create a new design with complex design element in the database. Therefore, we may reduce the production time to less than 5 hours by using a Powerful technique system rather than producing hand-made jewelry, which can take more than 27 hours.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.426-431
• /
• 2011

The quality of performance evaluation on engineering consultants that provide design-related technical services is difficult to be measured, and only a handful of papers discussed the quality during the design stage. Although design cost is relatively far less than construction cost for a project, the decisions made in the design phase have a significant impact on the final products of the project, especially for large public construction projects. Therefore, this research focuses on reviewing and then establishing a performance evaluation framework for the consulting firms that execute detailed design and provide technical services for the Taipei Rapid Transit Systems (TRTS). By interviewing experts, this study first established a set of indicators to evaluate these firms' performance. Then, those indicators were incorporated into the four aspects of balanced scorecard (BSC) to establish the architecture of the evaluation mechanism. The weight of each indicator was calculated by analytic hierarchy process (AHP) from a survey conducted among experts. The results showed that the top-three indicators were quantity take-off, functions conformity, and budgeting. The framework of performance evaluation established by this study can be applied to measure service performance during the design stage. It not only facilitates the monitoring of consulting firms, but also helps to reduce unnecessary change orders and disputes during the construction stage.

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.174-183
• /
• 2003

Space-Time (ST) codes are known to provide high transmission rates, diversity and coding gains. In this paper, a tight upper bound on the error probability of ST codes over rapid fading channels is presented. Moreover, ST codes suitable for rapid fading channels are presented. These codes are designed using the QPSK and 16-QAM signal constellations. The proposed codes are based on two different encoding schemes. The first scheme uses a single trellis encoder, whereas the second scheme uses the I-Q encoding technique. Code design is achieved via partitioning the signal space such that the design criteria are maximized. As a solution for the decoding problem of I-Q ST codes, the paper introduces a low-complexity decoding algorithm. Results show that the I-Q ST codes using the proposed decoding algorithm outperform singleencoder ST codes with equal complexity. The proposed codes are tested over fading channels with different interleaving conditions, where it is shown that the new codes are robust under such imperfect interleaving conditions.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.362-369
• /
• 2005

In this paper, a research for the knowledge based configuration design software development of a train vehicle has been presented. Parametric design and knowledge based design concepts have been introduced for rapid design changes and analyses using a commercial CAD software, $CATIA^{/circledR}$ Knowledgeware module. Positions and dimensions of door, small window, large window, and number of seats were used as design parameters. It is crucial for train vehicle design because it enables rapid conceptual design by instant configuration changes. The results of this research can be used as one sub module of the multidisciplinary train vehicle design software and provide a basic data for rolling stock behavior and driver cab ergonomics of a train vehicle.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.528-538
• /
• 2019

The transition from "More-of-Less" markets (economies of scale) to "Less-of-More" markets (economies of scope) is supported by advances of disruptive manufacturing and reconfigurable-supply-chain management technologies. With the prevalence of cyber-physical manufacturing systems, additive manufacturing technology is of great impact on industry, the economy, and society. Traditionally, backbone structures are built via bottom-up manufacturing with either pre-fabricated building blocks such as bricks or with layer-by-layer concrete casting such as climbing form-work casting. In both cases, the design selection is limited by form-work design and cost. Accordingly, the tool-less building of architecture with high design freedom is attractive. In the present study, we review the technological trends of additive manufacturing for construction-scale additive manufacturing in particular. The rapid tooling of patterns or molds and rapid manufacturing of construction parts or whole structures is extensively explored through uncertainties from technology. The future regulation still has drawbacks in the adoption of additive manufacturing in construction industries.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.280-286
• /
• 2022

This paper presents implementation of rapid control prototype (RCP) for permanent magnet synchronous machines (PMSMs) using a digital signal processor (DSP) and the PLECS software. By utilization of auto code generation function in the PLECS, a current vector control algorithm for a PMSM drive system using a DSP as a control processor can be developed more efficiently. In this paper, a background of a model based design (MBD) and real time control are reviewed. Also, commercial RCP products compatible with DSP boards are introduced. At the end of the paper, experimental implementation of RCP for a PMSM drive is presented.

• International Journal of Highway Engineering
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2017

PURPOSES : The objective of this study is to develop an optimized method of mix design for rapid-set lightweight-formed mortar mix. To achieve this objective, the workability, setting time, and compressive strength of mixes under various conditions of mix design were evaluated. METHODS : The water-bonder ratio, fly-ash substitution ratio, and forming agent injection amount were selected as design variables in the study. The fluidity, setting time, density, and strength of the mortar mix were considered as major evaluation criteria of the mixture, and were subsequently utilized to evaluate the characteristics of the mortar mix under various conditions. RESULTS : The observations made from the mix design process are as follows: 1) the air content and fluidity increase as the forming agent ratio and forming agent ratio increase, respectively; 2) the maximum air content is approximately 20%; 3) the accelerating agent decreases the fluidity of the mortar mix by 15% on average; 4) the forming agent injection ratio and fly-ash substitution ratio yield significant effects on the initial and final set times of the mortar mix; 5) as the forming agent injection ratio and fly-ash substitution ratio increase, the compressive strength of the mortar mix decreases; and 6) the 28-day compressive strengths of the forming agent injection ratio and fly-ash substitution ratio yield the most significant effects. CONCLUSIONS : It is concluded that the governing design variables for the rapid-set lightweight-formed mortar mix are the forming agent injection ratio and fly-ash substitution ratio.