• 대한조선학회논문집
• /
• 제57권2호
• /
• pp.80-87
• /
• 2020

As the Arctic sea ice decreases due to various reasons such as global warming, the demand for ships and offshore structures operating in the Arctic region is steadily increasing. In the case of sea ice, the anisotropy is caused by the uncertainty inside the material. For most of the research, nevertheless, estimating the ice load has been treated deterministically. With regard to this, in this paper, a four-point bending strength analysis of an ice specimen was attempted using a stochastic finite element method. First, spatial distribution of the material properties used in the yield criterion was assumed to be a multivariate Gaussian random field. After that, a direct method, which is a sort of stochastic finite element method, and a sensitivity method using the sensitivity of response for random variables were proposed for calculating the probabilistic distribution of ice specimen strength. A parametric study was conducted with different mean vectors and correlation lengths for each material property used in the above procedure. The calculation time was about ten seconds for the direct method and about three minutes for the sensitivity methods. As the cohesion and correlation length increased, the mean value of the critical load and the standard deviation increased. On the contrary, they decreased as the friction angle increased. Also, in all cases, the direct and sensitivity methods yielded very similar results.

• 전자공학회논문지
• /
• 제54권6호
• /
• pp.100-105
• /
• 2017

본 논문은 개인 인증 알고리즘에 관한 것으로 심전도를 이용한 생체 인증 방식은 특정 보정기준점을 추출하는 방법과 그렇지 않은 방법으로 분류할 수 있으며 본 논문에서 제안하는 방법은 특정 보정기준점을 추출하지 않는 방법으로 이산 코사인 변환과 랜덤 포레스트 분류기를 사용하였다. 심전도 신호는 R-Peak 점을 기준으로 단일 심박으로 나누었으며 각 심박의 특징 추출을 위해 이산 코사인 변환을 적용하였다. 이산 코사인 변환 계수는 정보가 저주파에 집중되는 특성이 있으므로 초기 저주파에 해당하는 40까지 값을 특징으로 랜덤 포레스트 분류기를 구성하였다. 랜덤 포레스트는 의사결정 트리의 앙상블 분류기로 결정 트리를 기본으로 하고 있으므로 빠른 학습 속도와 많은 양의 데이터 처리 능력, 다양한 클래스를 분류할 수 있어 실생활에 적용 가능하며 무엇보다 ID의 승인과 거절을 위한 임계값을 분류기 내부에서 조절할 수 있어 오 분류에 강건한 알고리즘을 구성할 수 있다. 18개의 심전도 파일로 구성된 MIT-BIT Normal Sinus Rhythm 데이터베이스를 선정하여 성능을 평가하였으며 99.99%의 심전도 인식률을 보였다.

• 한국정보통신학회논문지
• /
• 제15권5호
• /
• pp.1073-1080
• /
• 2011

본 논문은 가상 광학 이론에 기반한 멀티미디어 정보를 보호하는 새로운 워터마킹 방법을 제안한다. 멀티미디어 데이터 보안을 위해 파동의 회절 현상을 설명하는 프레넬 변환을 이용하며, 원 영상과 삽입될 워터마크 영상을 가우시안 랜덤 벡터로 구성하기 위해 랜덤 위상 함수를 적용한다. 워터마크 영상의 프레넬 변환으로 얻은 허수부와 실수부를 분리하여 허수부는 원 영상에 인코딩 키로 삽입하여 워터마크를 감지할 수 없도록 하며, 실수부는 디코딩 키로 워터마킹된 영상으로부터 워터마크를 검출하기 위해 사용한다. 제안하는 디지털 워터마킹 방법은 워터마크가 성공적으로 삽입되고 복원될 수 있으며, 신호처리 연산 및 기학학적 변환에 강인하고, 절단 공격에도 강한 복원력을 증명한다. 실험의 성능 평가를 위해 PSNR을 사용하였으며, 실험 결과는 제안하는 방법의 유효성을 보여준다.

• Structural Engineering and Mechanics
• /
• 제2권4호
• /
• pp.395-402
• /
• 1994

An improved finite element-transfer matrix method is applied to the transient analysis of plates with large displacement under various excitations. In the present method, the transfer of state vectors from left to right in a combined finite element-transfer matrix method is changed into the transfer of generally incremental stiffness equations of every section from left to right. Furthermore, in this method, the propagation of round-off errors occurring in recursive multiplications of transfer and point matrices is avoided. The Newmark-${\beta}$ method is employed for time integration and the modified Newton-Raphson method for equilibrium iteration in each time step. An ITNONDL-W program based on this method using the IBM-PC/AT microcomputer is developed. Finally numerical examples are presented to demonstrate the accuracy as well as the potential of the proposed method for dynamic large deflection analysis of plates with random boundaries under various excitations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권3호
• /
• pp.1193-1209
• /
• 2015

Network coding is promising to maximize network throughput and improve the resilience to random network failures in various networking systems. In this paper, the problem of providing efficient confidentiality for practical network coding system against a global eavesdropper (with full eavesdropping capabilities to the network) is considered. By exploiting a novel combination between the construction technique of systematic Maximum Distance Separable (MDS) erasure coding and traditional cryptographic approach, two efficient schemes are proposed that can achieve the maximum possible rate and minimum encryption overhead respectively on top of any communication network or underlying linear network code. Every generation is first subjected to an encoding by a particular matrix generated by two (or three) Vandermonde matrices, and then parts of coded vectors (or secret symbols) are encrypted before transmitting. The proposed schemes are characterized by tunable and measurable degrees of security and also shown to be of low overhead in computation and bandwidth.

• Earthquakes and Structures
• /
• 제15권3호
• /
• pp.263-273
• /
• 2018

Operational modal analysis is being widely used in aerospace, mechanical and civil engineering. Common research fields include optimal design and rehabilitation under dynamic loads, structural health monitoring, modification and control of dynamic response and analytical model updating. In many practical cases, influence of noise contamination in the recorded data makes it difficult to identify the modal parameters accurately. In this paper, an improved frequency domain method called Enhanced Least Square Complex Frequency (eLSCF) is developed to extract modal parameters from noisy recorded data. The proposed method makes the use of pre-defined approximate mode shape vectors to refine the cross-power spectral density matrix and extract fundamental frequency for the mode of interest. The efficiency of the proposed method is illustrated using an example five story shear frame loaded by random excitation and different noise signals.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.205-216
• /
• 1996

In this paper we propose an efficient robust path delay fault test genration algorithm for detection of path delay faluts in combinational ligic circuits. In the proposed robust test genration approach, the testability measure is computed for all gates in the circuit under test and these computed values are used to genrate weighted random delay test vetors for detection of path delay faults. For genrated robust test vectors, we perform fault simulation on ISCAS '85 benchmark circuits using parallel pattern technqieus. The results indicate that the proposed test genration method not only increases the number of detected robust path delay faults but also reduces the time taen to genrate robust tests.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.345-348
• /
• 2002

The Flow patterns around two cylinders in various arrangements were studied by a discrete vortex method. The flow for the surface of each cylinder was represented by arranging bound vortices at adequate intervals. The viscous diffusion of fluid was represented by the random walk method. The vortex distributions, streaklines, timelines and velocity vectors around two cylinders were calculated for centre-to-centre pitch ratios of $P/D=1.5 and 2.5$, attack angles of ${\alpha}=0^{\circ},\;30^{\circ},\;60^{\circ}\;and\;90^{\circ}$, and Reynolds number of Re=1200. The results of simulation correspond to the photographs by flow visualization and the flow intereference between two cylinders in various arrangements was clearly visualized by a numerical simulation.

• Structural Engineering and Mechanics
• /
• 제6권8호
• /
• pp.901-919
• /
• 1998

Most reliability-based analyses focus on the reliability of the individual components of a structure. There are many advantages to examining the components in combination as an entire structural system. This paper illustrates an algorithm used in the computer program RELSYS (RELiability of SYStems) which computes the system reliability of any structure which can be modeled as a series-parallel combination of its components. A first-order method is used to initially compute the reliability of each individual component. The system reliability is computed by successively reducing the series and parallel systems until the system has been simplified to a single equivalent component. Equivalent alpha vectors are used to account for the correlation between failure modes during the system reduction process.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권3호
• /
• pp.365-372
• /
• 2003

The Flow patterns around two cylinders in various arrangements were studied by a discrete vortex method. The flow for the surface of each cylinder was represented by arranging bound vortices at adequate intervals. The viscous diffusion of fluid was represented by the random walk method. The vortex distributions. streaklines. timelines and velocity vectors around two cylinders were calculated for centre-to-centre pitch ratios of P/D=1.5 and 2.5, attack ang1es of $a=0^{circ}, 30^{circ}, 60^{circ} and 90^{\circ}$. and Reynolds number of Re= 1200. The results of simulation correspond to the photographs by flow visualization and the flow intereference between two cylinders in various arrangements were clearly visualized by a numerical simulation.