• 한국초지조사료학회지
• /
• 제18권2호
• /
• pp.143-150
• /
• 1998

Six field bean (GI-vcine soza S and Z ) plants were examined for their genetic polymorphisms and intraspecific variations using randomly amplified polymorphic DNA(RAPD) markers. In RAPD analysis of 5 random primers (Rp-1, Rp2, Rp-3, Rp-4, Rp-5), 30 of total 155 bands obtained kom 5 primers were polymorphic and sizes of polymirphic band ranged between 0.5 and 3.0 kb. Number of bands amplyfied per primer was varied from 2 to 11 and average number was 6.0. Genetic variation of intraspecies in the samples of six region was ranged behveen 11 to 25 percent, and genetic similarity among intraspecies was ranged from 0.69 to 0.78. In pairwise genetic similarity test of six field bean plants, Mun and Hoj showed highest coefficient of genetic similarity as 0.67, whereas Sin and Hoj was lowest as 0.45. According to the genetic similarity, the level of intraspecific variation is higher than that of regional distance in GI-vcine soza.

• 한국지진공학회논문집
• /
• 제18권2호
• /
• pp.73-78
• /
• 2014

In this paper, the stochastic 1D site response analysis method using Monte Carlo simulation and considering thespatial variation of shear wave velocity profile isproposed. To consider thespatial variation of shear wave velocity profile for 1D site response analysis, the proposed method generates random shear wave velocity profiles representing the target site, and Monte Carlo simulation is used to calculate theprobability distribution of the site response analysis results such as thepeak ground acceleration. Through the field application, The applicability of the proposed method is verified through field application.

• Structural Engineering and Mechanics
• /
• 제82권6호
• /
• pp.691-699
• /
• 2022

This paper is devoted to the presentation of a numerical study on vibration behavior of composite panels reinforced by glass fibres and carbon nanotubes (CNTs) subjected to thermal environments. The effect of temperature variation has been included as thermal load acting on in-plane direction of the panel. To model the composite material, a micromechanical model which contains random dispersion of nanotubes and single-direction fibers has been selected. The geometry of the panel has been considered to have a single curveture along its width. Based on the above assumptions, the governing equations have been derived by using thin shell theory capturing the panel curveture and also nonlinear deflections. Finally, the panel dependence on various factors such as the curveture, nanotube amount, fiber volume, fiber direction and temperature variation has been researched.

• 보건행정학회지
• /
• 제16권2호
• /
• pp.77-95
• /
• 2006

The present study was conducted to examine the degree of variation in length-of-stay (LOS) among health care institutions participating in 17 diagnosis-related groups (DRGs) payment system and to find out hospital characteristics affecting the variation. Electronic medical claims data for treatments of severity classification '0' of 17 DRGs provided for two $years(2003{\sim}2004)$ were collected. For each DRG, the degree of variation in average LOS among health care institutions were analyzed using the random effect model. For DRGs showing significant differences in LOS, multiple regression analyses were performed to find out factors associated with LOS. Significant variations in LOS were observed 9 DRGs including unilateral/bilateral lens procedures, adult/child tonsilectomy, other anal procedures, bilateral adult/child herniorraphy, unilateral child herniorraphy, and hysterectomy, and hysterectomy using laparoscopic procedure. Among the 9 DRGs, five DRGs were selected to investigate the factors explaining for the variation. It was observed that the location of institution was significant predictors for all five DRGs. Within the same DRGs, LOS was significantly shorter among the institutions located in Seoul than those in other areas. As compared to clinics, hospitals and general hospitals/tertiary care institutions showed significantly longer LOS for DRGs of lens procedures, tonsilectomy, and other anal procedures. It is recommended that the institutions located in other than Seoul area benchmark the strategies of the institution in Seoul in efficiently managing LOS. Also, significant variation within the same severity classification such as other anal procedures implies the imminent need for improvement of patient classification system.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.423-432
• /
• 2016

PURPOSE. The aim of this work is to evaluate different types of materials used for making implant abutments, by means of an in vitro study and a review of the literature, in order to identify the indications for a better choice of an implant-supported restoration in the anterior section. MATERIALS AND METHODS. 5 implant abutments were tested in a random order in the superior anterior maxilla of pig gingiva (n = 8): titanium dioxide (Nobel Biocare); zirconium dioxide, Standard BO shade (Nobel Biocare, Kloten, Switzerland); zirconium dioxide, Light BI shade (Nobel Biocare); zirconium dioxide, Intense A 3.5 shade (Nobel Biocare); and aluminium oxide. Each abutment was tested for 2 mm and 3 mm thickness. To determine color variation, VITA Easyshade Advance spectrophotometer (Vita Zahnfabrik, Bad Sackingen, Germany) was used. RESULTS. Results showed that the color variation induced by the abutment would be affected by the abutment material and gingival thickness, when the gingival thickness is 2 mm. All materials except zirconium dioxide (Standard shade) caused a visible change of color. Then, as the thickness of the gingiva increased to 3 mm, the color variation was attenuated in a significant manner and became invisible for all types of abutments, except those made of aluminium oxide. CONCLUSION. Zirconium dioxide is the material causing the lowest color variation at 2 mm and at 3 mm, whereas aluminium oxide causes the highest color variation no matter the thickness.

• 대한수학회보
• /
• 제49권3호
• /
• pp.495-510
• /
• 2012

Let $X_1$, $X_2$,${\ldots}$, $X_n$ be a sequence of independent and identically distributed random variables with common distribution function $F$. Convergence rates for the moments of extremes are studied by virtue of second order regularly conditions. A unified treatment is also considered under second order von Mises conditions. Some examples are given to illustrate the results.

• Journal of the Korean Data and Information Science Society
• /
• 제10권1호
• /
• pp.193-198
• /
• 1999

The estimation of parameters in regression models with multiplicative errors is usually based on the gamma or log-normal likelihoods. Under reciprocal misspecification, we compare the small sample efficiencies of two sets of estimators via a Monte Carlo study. We further consider the case where the errors are a random sample from a Weibull distribution. We compute the asymptotic relative efficiency of quasi-likelihood estimators on the original scale to least squares estimators on the log-transformed scale and perform a Monte Carlo study to compare the small sample performances of quasi-likelihood and least squares estimators.

• Archives of Pharmacal Research
• /
• 제5권2호
• /
• pp.53-60
• /
• 1982

The mixing of salicylic acid and wheat starch powders was studied using a V-type mixer. After the optimum operating conditions of the mixer were examined, the mixing characteristics relating to dilution ratio, particle size of active ingradient and addition ratio of lubricants were investigated. The coefficient of variation was expressed by a power law relating to the dilution ratio and the particle size of active ingredient. Furthermore, the comparison of results with the theoretically estimated value of mixing index suggested that the mixing of cohesive pharmacceutical powders is a complex stochastic process and cannot be explained fully by a simple theory based on a complete random mixing.

• 식물조직배양학회지
• /
• 제25권5호
• /
• pp.309-313
• /
• 1998

본 연구는 국내의 경우 제주도의 일부지역에서만 자생하는 흑오미자(Schisandra nigra)를 RAPD법을 이용하여 자웅동주 및 자웅이주 식물의 특이적 Marker를 탐색하고저 실시 하였다. 10-mer로 구성된 80종류의 random primer를 사용하여 흑오미자를 분석한 결과 기존의 재배되고 있는 오미자(Schisandra chinensis) 또는 남오미자(Kadsura japonica)와는 다른 band pattern을 보여 주었다. 흑오미자의 자웅동주. 암그루, 숫그루의 3품종을 상기와 동일하게 80개의 primer를 사용하여 RAPD를 분석한 결과, 5종류의 random primer(OPA-17, OPA-19, OPB-3, OPB-9, OPB-16)에 대해서는 각 품종에 대한 특이적인 band가 검출되었다. 숫그루, 암그루 식물과는 다르게 자웅동주 식물은 3개체(1호 2호, 3호)간에도 서로 다른 band pattern을 보이는 특징을 갖고있다. 숫그루 특이적인 band pattern은 OPB-3 primer을 이용할 경우 750bp에서 검출되었고, 암그루는 OPA-19 primer에서 950bp, 1690bp와 OPB-3 primer의 경우 700bp에서 자웅동주 및 숫그루에서 나타나지 않는 band가 검출되었다. 이러한 결과는 흑오미자의 숫그루 및 암그루에서 나타난 특이적인 band가 유묘시기에 암ㆍ수 개체를 조기에 구별하는 genetic marker로 사용할 수 있으리라 기대된다.

• 자원환경지질
• /
• 제33권4호
• /
• pp.295-307
• /
• 2000

확률론적 해석방법 (probabilistic analysis)은 현장으로부터 획득한 자료들에서 일반적으로 발생하는 가변성과 불확실성을 효과적으로 정량화하여 해석에 이용할 수 있는 방법 중의 하나로 제안되었다. 특히 암반사면공학에서는 이러한 가변성과 불확실성이 불연속면의 방향 및 기하학적 특성, 그리고 실내실험 결과의 분산으로 나타난다. 확률론적 해석방법은 불연속면의 기하학적 특성과 강도 특성을 확률변수 (random variable)로 취급하여 신뢰성이론 (reliability theory)과 확률이론 (probability theory)을 근거로 분석하였으며 이를 기초로 하여 Monte Carlo Simulation과 같은 해석법을 이용, 구조물의 붕괴가능성을 확률로 표현하였다. 확률론적 해석 방법은 기존의 안전율을 대체하여 구조물의 안정성을 붕괴확률 (probability of failure)로 제안하였으며 이 붕괴확률은 안전율의 확률분포함수 (probability density function)에서 안전율이 1보다 작을 가능성을 확률로 나타낸 수치이다. 이 방법은 안전율의 개념을 기초로 하여 자료의 분산을 고려하지 않은 채 단일 대표 값만을 이용하여 구조물의 안정성을 판단하는 전통적인 결정론적 해석방법 (deterministic analysis)과 비교되어진다. 본 논문에서는 확률론적 해석방법을 이용하여 불연속면 특성들의 확률특성을 고찰하였으며 이를 기초로 하여 암반사면의 안정성 해석에 응용했다. 또한 확률론적 해석과 결정론적인 해석의 결과를 비교, 그 차이점을 설명하고자 하였다.