• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.398-398
• /
• 2020

대도시 상류부에 위치한 댐의 과도한 방류 또는 급작스러운 붕괴는 대규모의 인명 또는 재산피해를 야기할 수 있으며, 다양한 댐 유입량 조건에 따른 침수양상을 파악하는 것은 수재해 대응능력 향상에 필수적이다. 그러나 다양한 과다한 댐 방류 또는 붕괴유량에 따른 침수 범위는 도시의 내수침수와 달리 매우 넓은 지형조건을 고려하며 침수 범위가 광범위하게 나타날 수 있다. 이는 다양한 댐 유입량 조건에 따른 침수 지도를 생성 및 파악하는데 어려움을 가중시키며, 특히 댐 운영에 따른 침수양상을 실시간으로 파악하는데 어려움을 가중시킨다. 본 연구에서는 저빈도부터 PMF(Probable Maximum Flood) 조건까지의 다양한 댐 유입량자료를 바탕으로, 1차원 하천홍수해석을 실시하였다. 연구 대상으로 팔당댐에 대한 댐 해석을 실시하였으며, 팔당댐 하류에 위치한 서울시에 대한 영향을 분석하였다. 1차원 해석 결과로 산정되는 각하도 단면 별 홍수위자료와 GIS을 연계하여 다양한 발생빈도를 나타내는 유입량에 대한 침수지도를 생성하였으며, 기존에 제시된 발생빈도에 따른 침수지도 외에 임의 빈도의 침수지도를 실시간으로 생성할 수 있는 랜덤포레스트 회귀 모형을 구축하였다. 위의 과정들을 통해 다양한 유입량 조건에 따른 연구대상 지역에서의 침수예상도를 분석할 수 있었으며, 서울시 전반적으로 나타날 수 있는 침수심의 공간적 분포를 파악할 수 있었다. 주어진 침수 지도를 이용하여 서울시에 대한 인구 및 건축물의 경제적 가치 자료를 이용하여 추가적인 홍수 위험도 분석이 가능할 것으로 보이며, 임의 빈도에 대하여 실시간으로 침수를 예측할 수 있는 랜덤포레스트와 연계할 수 있다. 제시된 방법론은 댐의 과다한 방류량과 붕괴 현상을 재현하며, 도시의 수재해 대응능력 향상을 위한 기초자료를 제공할 수 있을 것으로 보인다.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.60-67
• /
• 2001

Multicast Protocol for multimedia service on the Internet can be classified into two types, e.g., source based tree and shared tree according to difference of tree construction method. Shared tree based multicast is known to show outstanding results in the aspect of scalability than source based tree. Generally, There have been lots of researches on the method to satisfy QoS constraints through proper Rendezvous Point (RP) in the shared tree. In addition, as the multicast group members join and leave dynamically in the service time, RP of the shared tree should b be reselected for guranteeing Qos to new member, But, RP reselection method has not been considered generally as the solution to satisfy QoS C constraints. In this paper, new initial RP selection and RP reselection method are proposed, which utilize RTCP (Real Time Control Protocol) report packet fields. Proposed initial RP selection and RP reselection method use RTCP protocol which underlying multimedia application service So, the proposed method does not need any special process for collecting network information to calculate RP. New initial RP selection method s shows better performance than random and topology based one by 40-50% in simulation. Also, RP reselection method improves delay p performance by 50% after initial RP selection according to the member’s dynamicity.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.83-96
• /
• 2005

The multichannel switch is an architecture widely used for ATM (Asynchronous Transfer Mode). It is known that the fault tolerant characteristic can be incorporated into the multichannel crossbar switching fabric. For example, if a link belonging to a multichannel group fails, the remaining links can assume responsibility for some of the traffic on the failed link. On the other hand, if a fault occurs in a switching element, it can lead to erroneous routing and sequencing in the multichannel switch. We investigate several fault localization algorithm in multichannel crossbar ATM switches with a view to early fault recovery. The optimal algorithm gives the best performance in terms of time to localization but it is computationally complex which makes it difficult to implement. We develop an on-line algorithm which is computationally more efficient than the optimal one. We evaluate its performance through simulation. The simulation results show that the Performance of the on-line algorithm is only slightly sub-optimal for both random and bursty traffic. There are cases where the proposed on-line algorithm cannot pinpoint down to a single fault. We enumerate those cases and investigate the causes. Finally, a fault recovery algorithm is described which utilizes the information provided by the fault localization algorithm The fault recovery algorithm providesadditionalrowsandcolumnstoallowcellstodetourthefaultyelement.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.421-426
• /
• 2010

Due to the ease of deployment and the extended coverage, wireless mesh networks (WMNs) are gaining popularity and research focus. For example, the routing protocols that enhance the throughput on the WMNs and the link quality measurement schemes are among the popular research topics. However, most of these works assume that the locations of the mesh routers are predetermined. Since the operators in an Indoor mesh network can determine the locations of the mesh routers by themselves, it is essential to the WMN performance for the mesh routers to be initially placed by considering the performance issues. In this paper, we propose a mesh router placement scheme based on genetic algorithms by considering the characteristics of WMNs such as interference and topology. There have been many related works that solve similar problems such as base station placement in cellular networks and gateway node selection in WMNs. However, none of them actually considers the interference to the mesh clients from non-associated mesh routers in determining the locations of the mesh routers. By simulations, we show that the proposed scheme improves the performance by 30-40% compared to the random selection scheme.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.69-74
• /
• 2010

A new package substrate for dynamic random access memory(DRAM) devices has been developed using selective aluminum anodization. Unlike the conventional substrate structure commonly made by laminating epoxy-based core and copper clad, this substrate consists of bottom aluminum, middle anodic aluminum oxide and top copper. Anodization process on the aluminum substrate provides thick aluminum oxide used as a dielectric layer in the package substrate. Placing copper traces on the anodic aluminum oxide layer, the resulting two-layer metal structure is completed in the package substrate. Selective anodization process makes it possible to construct a fully filled via structure. Also, putting vias directly in the bonding pads and the ball pads in the substrate design, via in pad structure is applied in this work. These arrangement of via in pad and two-layer metal structure make routing easier and thus provide more design flexibility. In a substrate design, all signal lines are routed based on the transmission line scheme of finite-width coplanar waveguide or microstrip with a characteristic impedance of about $50{\Omega}$ for better signal transmission. The property and performance of anodic alumina based package substrate such as layer structure, design method, fabrication process and measurement characteristics are investigated in detail.