• Journal of the Korea Institute of Building Construction
• /
• v.5 no.3 s.17
• /
• pp.75-82
• /
• 2005

Sewage facilities are positively necessary for environment improvement such as rainwater removal, sewage disposal, preservation of the quality of water and health of the citizens in present-day. Meanwhile, a deterioration of the concrete sewer pipe is increasing rapidly due to the chemical and physical attack and especially biochemical attack that is to say biodeterioration. So, in advanced countries, prediction techniques and corrosion inhibition system for sewer concrete are developed and are being applied. Also, antibiotics were developed already but application of that is low because it is not economical and has no practical use. But, in domestic, countermeasures for the corrosion of sewage concrete are not sufficient and biochemical attack is not reflected in those essentially. In this study, to prevent biochemical corrosion of the sewer concrete, surface of the concrete was spread with liquefied inorganic antibiotics and then its engineering properties were experimentally investigated. As a result, compressive strength of the specimen spread with antibiotics were similar to those of non spread, Both bond strength and abrasion amount of the specimen spread with antibiotics were inferior to non spread. Properties of absorption and air permeability of the specimen spread with antibiotics were superior to non spread. Finally, carbonation depth, chloride ion penetration depth and weight change ration of the specimen spread with antibiotics were smaller than non spread.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.17-23
• /
• 2009

Interest in application of ultraviolet light technology for primary disinfection of potable water in drinking water treatment plants has increased significantly in recent years. The efficacy of disinfection processes in water purification systems is governed by several key factors, including reactor hydraulics, disinfectant chemistry, and microbial inactivation kinetics. The objective of this work was to develop a computational fluid dynamics(CFD) model to predict velocity fields, mass transport, chlorine decay, and microbial inactivation in a continuous flow reactor. The CFD model was also used to evaluate disinfection efficiency in alternative reactor designs. In a typical operation, water enters the inlet of a UV lamp and flows through the annular space between the quartz sleeve and the outside chamber wall. The irradiated water leaves through the outlet nozzle. In this paper, it describe the how to design optimal ultraviolet disinfection device for ground water and rainwater. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method, performed simulation and proved satisfied performance.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.4
• /
• pp.35-41
• /
• 2006

This paper analyzed elution and ingredients of soil components which consist of soil and rocks in 6 regions in Yeongyang and Cheongsong to identify substantial matters that cause muddy water in Imha reservoir. We identified that more than 80% of major ingredients in collected soil and rocks are vermiculite(V), illite(I), kaolinite(Ka), quartz(Q), feldspar(F). Sodium and calcium are eluted in large quantities from soil of Sanseong and Cheongki. When calcium is in contact with water, much ions are eluted rapidly. We confirmed these ions are alkali minerals rising pH. We consider clay components distributed in Yeongyang as major cause of muddy water and rising pH of Imha reservoir because its ingredient calcite easily is dissolved in rainwater and splits other mineral particles into ${\mu}m$ sized particles.

• Journal of the Korean Geosynthetics Society
• /
• v.4 no.2
• /
• pp.47-56
• /
• 2005

Recently, geosynthetic reinforced earth walls are gradually replacing conventional concrete retaining walls for reasons of economy, expediency of construction, and aesthetics. A number of reinforced soil walls having more than 10m heights have been constructed to make more effective development in the country. However, mistakes in design and construction of reinforced earth walls have resulted in many troubles such as failure of reinforced earth walls, horizontal deformationor breakdown of facings, and so forth during or after construction. In this paper, a case study on global sliding failure of a geogrid-reinforced tiered wall is carried out to investigate the causes of the failure and suggest the proper countermeasures. From the subsurface investigation and field instrumentation, It is found that the cause of the global sliding failure was occurred by decreasing of bearing capacity of foundation ground induced by infiltration of rainwater.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.6
• /
• pp.388-396
• /
• 2014

In this study, numerical simulations are conducted for the inundations due to storm surge and rainfall at Masan City of Korea where severe damages occurred by the typhoon Maemi. A coupled numerical model which can deal with various flow patterns such as storm surge, rainfall and sewer flows is employed. The numerical results show that the inundation area and depth increase significantly when the combined effects of storm surge and rainfall are considered in comparison with those obtained without a rainfall effect. Further numerical simulations are conducted to evaluate the performance of the sea wall being constructed for the coastal defence. The results show that the maximum inundation depths decrease when the sea wall is constructed. However, the duration of inundation becomes longer, because the rainwater on the ground cannot be discharged easily to the sea due to the presence of the sea wall.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.2
• /
• pp.57-66
• /
• 2016

Wet deposition fluxes of ions at a coastal site in southwestern Japan in the period 1996-2003 were investigated to quantify the respective contributions of cyclone-, stationary front- and typhoon-associated rains. On average, the deposition fluxes of terrigenous-origin ions, nss-$SO_4{^{2-}}$, $NO_3{^-}$, $NH_4{^+}$ and nss-$Ca^{2+}$ were $37.6{\pm}7.3$, $16.3{\pm}4.2$, $19.0{\pm}3.4$ and $9.6{\pm}4.8meq\;m^{-2}yr^{-1}$, and those of $Na^+$ and $Cl^-$, the major ions in sea water, were $97.0{\pm}38.2$ and $115.2{\pm}48.2meq\;m^{-2}yr^{-1}$, respectively. Cyclone-associated rain constituted more than 50% of the fluxes of the terrigenous ions in almost all years. Stationary front-associated rain also contributed significantly, although the contribution was lower than the contribution by Cyclone-associated rain in almost all years. In particular, the wet deposition flux of nitrogen compounds of $NO_3{^-}$ and $NH_4{^+}$, which are important nutrients for micro-bioactivities in sea surface water, was dominated by cyclone-associated rain. Due to the extreme abundance of $Na^+$ and $Cl^-$ in the rainwater of typhoons, the fluxes of $Na^+$ and $Cl^-$ were contributed substantially by typhoons in years with typhoons' passage although cyclones were still the largest contributor to the fluxes. These results indicate the dominance of cyclones in the wet deposition to the East China Sea areas and the necessity to take rain types into account for a more accurate elucidation of the temporal and spatial variation of the wet deposition.

• Journal of Korean Society on Water Environment
• /
• v.26 no.6
• /
• pp.926-933
• /
• 2010

Runoff from a parking lot can be highly contaminated nonpoint source due to the impermeability of rainwater. This study presented runoff characteristics of heavy metals especially Zn and Pb from a parking lot during total 17 rain events. Monitoring results showed the first flush phenomenon within 30 min was observed in all rain events, but the event mean concentration (EMC) did not clearly show the characteristics of runoff. The ranges of Pb and Zn was $4{\sim}201{\mu}g/L$ and $131{\sim}672{\mu}g/L$, respectively, and the runoff mass of Zn and Pb was highly to related with the flow rate, and runoff coefficient of rain. The runoff mass of Zn was greater than that of Pb in all events. The runoff mass of Pb was highly correlated with the amount of TSS, and TSS and DOC were was related with the mass of Zn. This result implies that Pb and Zn are mainly existed in the particulate form. The results can be used to as meaningful data in the management of nonpoint source, and in the management in the runoff catchment in the parking lot.

• Journal of Korean Society on Water Environment
• /
• v.36 no.3
• /
• pp.206-219
• /
• 2020

As urbanization and impermeable areas have increased, stormwater and non-point pollutants entering the stream have increased. Additionally, in the case of the old town comprising a combined sewer pipe system, there is a problem of stream water pollution caused by the combined sewer overflow. To resolve this problem, many cities globally are pursuing an environmentally friendly low impact development strategy that can infiltrate, evaporate, and store rainwater. This study analyzed the expected effects and efficiency when the LID facility was installed as a measure to improve hydrologic cycle and water quality in the Oncheon stream in Busan. The EPA-SWMM, previously calibrated for hydrological and water quality parameters, was used, and standard parameters of the LID facilities supported by the EPA-SWMM were set. Benchmarking the green infrastructure plan in New York City, USA, has created various installation scenarios for the LID facilities in the Oncheon stream drainage area. The installation and maintenance cost of the LID facility for scenarios were estimated, and the effect of each LID facility was analyzed through a long-term EPA-SWMM simulation. Among the applied LID facilities, the infiltration trench showed the best effect, and the bio-retention cell and permeable pavement system followed. Conversely, in terms of cost-efficiency, the permeable pavement systems showed the best efficiency, followed by the infiltration trenches and bio-retention cells.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.319-323
• /
• 2009

최근 대체수자원 개발, 도시 비점오염과 물순환 체계의 효율적 관리를 위한 분산식 빗물관리기술에 대한관심이 급증하고 있다. 이수 목적의 빗물이용시설, 치수목적의 우수유출 저감시설, 택지개발사업의 재해저감시설 등 다양한 목적으로 시설들이 도입되고 있다. 그러나 치수용 시설에 있어 설계강우에 따른 홍수량 산정방법을 제외하고는 이수 및 물순환 건전화를 위한 계획, 설계기술은 현재까지도 부족한 실정이다. 특히 이수목적의 경우 집수면의 토지이용 특성, 용도별 사용수량 및 경제성에 대한 검토 없이 집수면적이나 대지면적의 일정비율 이상을 설계하고 있는 실정이다. 본 연구에서는 국내에서의 빗물관리시설 계획 설계를 지원하기 위해 공동주택 빗물관리 의사결정지원 모형(RainCity v1.5 Beta)을 개발하였다. 강우자료는 5분 간격의 설계강우, 시우량 및 일 강우자료를 DB나 사용자 파일로부터 호출하도록 하였으며, 토지이용 특성에 따라 유출계수를 고려한 수문학적 집수면적을 산정하여 적용하였다. 현재 버전은 이수 및 치수용 저류조, 침투통, 침투트렌치, 침투블럭 등 장치형 침투시설과 투수성포장 등 지표면 침투시설을 대상으로 하였으며, 각 시설조합의 설치에 따른 유입/유출량, 침투량 및 사용수량 등 물순환 과정을 모의할 수 있다. 특히 선택된 시설조합은 규모 시나리오에 따라 목표 기능에 맞는 시설규모들을 선정하고, 비용-편익분석을 통해 경제적인 시설규모를 결정할 수 있다. 향후 지속적으로 GUI를 개선하여 사용자 편의도를 높이고, 식생형 침투도랑, 생태연못, 중수이용시설과의 연계 등 기능을 확대할 계획이므로 국내에서의 빗물관리시설의 계획 설계 시 활용도가 높을 것으로 기대된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.92-99
• /
• 2009

Deeply-driven ground rod in the rainy season may contact with rainwater and ground water. When surge voltages are applied to the submerged ground rods, the ionization around the ground rods are occurred. Ionization in soil and/or water is affected in dynamic performance of ground rod systems. This work aims at studying the transient performance of ground rod system under impulse voltage using scale model in an electrolytic tank. The potential reduction and energy dispersion caused by ionization were treasured and quantitatively analyzed using the Matlab Program. As a result, the peak voltage at the terminal of ground rod was varied with water resistivity and charging voltage of Marx generator. The potential at the terminal of the ground rod was approximately reduced to a half of the applied voltage just below breakdown voltage. Also the energy more than half of the applied energy was dispersed through the ground rod due to ionization just below breakdown voltage.