• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.317-317
• /
• 1999

• 시스템엔지니어링학술지
• /
• 제17권1호
• /
• pp.76-84
• /
• 2021

Radioactive waste generated from nuclear power plant decommissioning shall be strictly managed so that radioactive materials above the allowable limit are not leaked into the environment. Radioactive wastes shall be classified and treated for management based on characteristics such as the type of waste, physicochemical properties, nuclide concentration and radioactivity. Waste characterization report shall be prepared and submitted to the disposal facility operator to ensure that the treated waste is suitable for disposal. The disposal facility operator shall review the waste Characterization report and visit the nuclear power plant decommissioning site to ensure that the wastes are processed step by step according to the plan. The waste Characterization report may be used as input data to evaluate disposal facility safety. Domestic and foreign data are collected and reviewed to confirm the entire processes from waste generation to delivery. This paper proposes the method to prepare the waste Characterization report which contains data and information on waste characteristics, treatment facilities & method and packaging method & container.

• Journal of Radiation Protection and Research
• /
• 제45권2호
• /
• pp.81-87
• /
• 2020

Background: Kori unit #1 is permanently shut down after a 40-year lifetime. The Nuclear Safety and Security Commission recommends establishing initial decommissioning plans for all nuclear and radwaste treatment facilities. Therefore, the Korea Atomic Energy Research Institute (KAERI) must establish an initial and final decommissioning plan for radwaste-treatment facilities. Radiation safety assessment, which constitutes one chapter of the decommissioning plan, is important for establishing a decommissioning schedule, a strategy, and cost. It is also a critical issue for the government and public to understand. Materials and Methods: This study provides a method for assessing external radiation dose to workers during decommissioning. An external dose is calculated following each exposure scenario, decommissioning strategy, and working schedule. In this study, exposure dose is evaluated using the deterministic method. Physical characterization of the facility is obtained by both direct measurement and analysis of the drawings, and radiological characterization is analyzed using the annual report of KAERI, which measures the ambient dose every month. Results and Discussion: External doses are calculated at each stage of a decommissioning strategy and found to increase with each successive stage. The maximum external dose was evaluated to be 397.06 man-mSv when working in liquid-waste storage. To satisfy the regulations, working period and manpower must be managed. In this study, average and cumulative exposure doses were calculated for three cases, and the average exposure dose was found to be about 17 mSv/yr in all the cases. Conclusion: For the three cases presented, the average exposure dose is well below the annual maximum effective dose restriction imposed by the international and domestic regulations. Working period and manpower greatly affect the cost and entire decommissioning plan; hence, the chosen option must take account of these factors with due consideration of worker safety.

• Journal of Radiation Protection and Research
• /
• 제48권2호
• /
• pp.77-83
• /
• 2023

Background: The purpose of this study is to purify uranium (U[VI])-contaminated soil-flushing effluent using the precipitation-distillation process for clearance. Precipitation and distillation are commonly used techniques for water treatment. We propose using a combination of these methods for the simple and effective removal of U(VI) ions from soil-flushing effluents. In addition, the U concentration (Bq/g) of solid waste generated in the proposed treatment process was analyzed to confirm whether it satisfies the clearance level. Materials and Methods: Uranium-contaminated soil was decontaminated by soil-flushing using 0.5 M sulfuric acid. The soil-flushing effluent was treated with sodium hydroxide powder to precipitate U(VI) ions, and the remaining U(VI) ions were removed by phosphate addition. The effluent from which U(VI) ions were removed was distilled for reuse as a soil-flushing eluent. Results and Discussion: The purification method using the precipitation-distillation process proposed in this study effectively removes U(VI) ions from U-contaminated soil-flushing effluent. In addition, most of the solid waste generated in the purification process satisfied the clearance level. Conclusion: The proposed purification process is considered to have potential as a soil-flushing effluent treatment method to reduce the amount of radioactive waste generated.

• 시스템엔지니어링학술지
• /
• 제17권1호
• /
• pp.85-96
• /
• 2021

Radioactive mixed waste (RMW) means waste mixed with radioactive substances and hazardous substances. In Korea, there are definitions and disposal restrictions on RMW in the Nuclear Safety Management Act, but it is difficult to apply because the contents are insufficient, so this paper proposed applicable management standards. The main RMW generated from nuclear power plants is waste oil, waste asbestos, PCB, and waste fluorescent liquid, and their radiation characteristics are mostly at very low levels and some are estimated at low levels. In addition to nuclear power plants, RMW also occurs in research institutes, industries, and hospitals. The acceptance criteria of all disposal facilities in the world basically prohibit disposal of RMW unless the hazardous substances of RMW are removed or mitigated below the standard value. Cases in Korea, the United States, Japan and Europe were reviewed to propose the RMW management standards in Korea. With reference to the results of the above review, this paper clearly defined RMW and proposed detailed management standards for the separation, storage, treatment and disposal of hazardous substances by applying the Waste Control Act. It also mentioned legislation of management standards, regulatory methods, and acceptance criteria of disposal facility operator.

• 방사성폐기물학회지
• /
• 제10권2호
• /
• pp.117-123
• /
• 2012

한국원자력연구원 내 저장중인 중 저준위방사성폐기물의 안전한 영구처분을 위하여 방사성폐기물처리시설에서는 이들 저장폐기물의 핵종재고량 평가를 위한 드럼핵종분석장치의 도입을 기획하고 있으며, 이 장치를 운영하고 유지보수하기 위한 전용의 평가시설 구축을 추진하고 있다. 이 평가시설 외부에는 제1방사성폐기물저장시설이 인접하여 있으며 내부에는 평가대상드럼들과 드럼핵종분석장치의 밀도보정용 선원 등이 존재함으로 이들이 방사선원항으로 작용하여 평가시설 내 외부의 선량률에 영향을 미치게 된다. 따라서 방사선원항 주변의 콘크리트 구조물에 대한 방사선차폐 영향을 평가하여야 한다. 본 연구에서는 MCNP 코드를 이용하여 해당 방사선원항으로부터 평가시설 내부 방사선관리구역을 둘러싸고 있는 콘크리트 구조물에 대한 방사선 안전성을 평가하였다. 평가결과 현재 고려되고 있는 콘크리트 구조물의 약 30 cm 두께는 해당 방사선원항으로부터의 방사선을 차폐하기에 충분한 것으로 확인되었다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2006년도 학술논문요약집
• /
• pp.150-151
• /
• 2006

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.200-201
• /
• 2018

• 공업화학
• /
• 제1권1호
• /
• pp.23-29
• /
• 1990

급속동결 전처리가 유기이온교환 수지의 분쇄에 미치는 효과를 연구하였다. 습윤상태의 이온교환 수지를 고체탄산 또는 액체질소를 이용하여 급속동결하면 이온교환 수지의 내부구조가 물리적으로 파괴되며 일단 파괴된 수지는 다시 실온이 되어도 원래의 상태로 회복되지 않음을 발견하였다. 따라서 급속동결한 수지는 실온에서도 분쇄가 매우 용이하며 이 효과는 양이온교환 수지가 음이온교환 수지에 비하여 더 크게 나타났다. 아울러 음이온교환 수지의 경우, 급속동결 전처리 효과 뿐만 아니라 이온종류 역시 분쇄에 큰 영향을 미침을 관찰할 수 있었다.

• 방사선산업학회지
• /
• 제18권2호
• /
• pp.147-153
• /
• 2024

Radioactive liquid waste generated during operation and overhaul is collected and reused through the radioactive liquid waste treatment system and continuous monitoring system in the nuclear power plant or discharged to the outside if it satisfies the limit within the control and monitoring. However, there are concerns about boric acid management, which controls the power output of nuclear power plants in radioactive liquid waste. Due to the behavior of boric acid, it is difficult to remove it in the existing liquid radwaste system, and the concentration of boric acid water discharged tends to be higher than the natural state of 5 ppm, so additional facilities should be considered. Therefore, this study aims to evaluate the radiological effects of radioactive waste treatment facilities that are under development and use them as a basis for managing worker exposure and evaluating the safety of facilities in the future.